Form 10-Q

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

 

FORM 10-Q

 

 

 

x QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended December 31, 2012

or

 

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15 (d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from             to             

Commission file number 1-5978

 

 

SIFCO Industries, Inc.

(Exact name of registrant as specified in its charter)

 

 

 

Ohio   34-0553950

(State or other jurisdiction of

incorporation or organization)

 

(I.R.S. Employer

Identification No.)

970 East 64th Street, Cleveland Ohio   44103
(Address of principal executive offices)   (Zip Code)

(216) 881-8600

(Registrant’s telephone number, including area code)

 

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definition of “large accelerated filer”, “accelerated filer”, “non-accelerated filer”, and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large accelerated filer   ¨    Accelerated filer   ¨
Non-accelerated filer   ¨    Smaller reporting company   x

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).     Yes  ¨    No  x

The number of the Registrant’s Common Shares outstanding at December 31, 2012 was 5,339,571.

 

 

 


Part I. Financial Information

 

Item 1. Financial Statements

SIFCO Industries, Inc. and Subsidiaries

Consolidated Condensed Statements of Operations

(Unaudited)

(Amounts in thousands, except per share data)

 

     Three Months Ended
December 31,
 
     2012     2011  

Net sales

   $ 28,700      $ 24,726   

Operating expenses:

    

Cost of goods sold

     23,015        19,940   

Selling, general and administrative expenses

     3,804        2,796   

Amortization of intangible assets

     559        815   

Gain on disposal of operating assets

     (125     0   
  

 

 

   

 

 

 

Total operating expenses

     27,253        23,551   
  

 

 

   

 

 

 

Operating income

     1,447        1,175   

Interest income

     (5     (4

Interest expense

     106        94   

Foreign currency exchange (gain) loss, net

     7        (13

Other income, net

     (77     (117
  

 

 

   

 

 

 

Income from continuing operations before income tax provision

     1,416        1,215   

Income tax provision

     495        382   
  

 

 

   

 

 

 

Income from continuing operations

     921        833   

Income from discontinued operations, net of tax

     2,494        353   
  

 

 

   

 

 

 

Net income

   $ 3,415      $ 1,186   
  

 

 

   

 

 

 

Income per share from continuing operations

    

Basic

   $ 0.17      $ 0.16   

Diluted

   $ 0.17      $ 0.16   

Income per share from discontinued operations, net of tax

    

Basic

   $ 0.47      $ 0.06   

Diluted

   $ 0.46      $ 0.06   

Net income per share

    

Basic

   $ 0.64      $ 0.22   

Diluted

   $ 0.63      $ 0.22   

Weighted-average number of common shares (basic)

     5,340        5,299   

Weighted-average number of common shares (diluted)

     5,385        5,325   

See notes to unaudited consolidated condensed financial statements.

 

2


SIFCO Industries, Inc. and Subsidiaries

Consolidated Condensed Statements of Comprehensive Income

(Unaudited)

(Amounts in thousands, except per share data)

 

     Three Months  Ended
December 31,
 
     2012     2011  

Net income

   $ 3,415      $ 1,186   

Other comprehensive income (loss), net of tax:

    

Foreign currency translation adjustment

     (284     (45

Net retirement plan liability adjustment

     229        202   

Interest rate swap agreement adjustment

     16        (45
  

 

 

   

 

 

 

Comprehensive income

   $ 3,376      $ 1,298   
  

 

 

   

 

 

 

See notes to unaudited consolidated condensed financial statements.

 

3


SIFCO Industries, Inc. and Subsidiaries

Consolidated Condensed Balance Sheets

(Amounts in thousands, except per share data)

 

     December 31,
2012
    September 30,
2012
 
     (unaudited)        
ASSETS     

Current assets:

    

Cash and cash equivalents

   $ 5,549      $ 7,176   

Receivables, net

     18,908        20,780   

Inventories, net

     19,256        17,505   

Deferred income taxes

     1,343        1,415   

Prepaid expenses and other current assets

     1,471        1,122   

Current assets of business held for sale

     0        3,908   
  

 

 

   

 

 

 

Total current assets

     46,527        51,906   

Property, plant and equipment, net

     29,498        29,726   

Intangible assets, net

     14,068        14,627   

Goodwill

     7,015        7,015   

Other assets

     1,692        695   

Noncurrent assets of business held for sale

     0        2,576   
  

 

 

   

 

 

 

Total assets

   $ 98,800      $ 106,545   
  

 

 

   

 

 

 
LIABILITIES AND SHAREHOLDERS’ EQUITY     

Current liabilities:

    

Current maturities of long-term debt

   $ 4,356      $ 2,000   

Accounts payable

     8,551        9,181   

Accrued liabilities

     7,253        4,330   

Current liabilities of business held for sale

     0        1,171   
  

 

 

   

 

 

 

Total current liabilities

     20,160        16,682   

Long-term debt, net of current maturities

     6,194        19,683   

Deferred income taxes

     304        1,154   

Other long-term liabilities

     8,601        8,494   

Noncurrent liabilities of business held for sale

     0        390   

Shareholders’ equity:

    

Serial preferred shares, no par value, authorized 1,000 shares

     0        0   

Common shares, par value $1 per share, authorized 10,000 shares; issued and outstanding shares – 5,366 at December 31, 2012 and September 30, 2012

     5,366        5,366   

Additional paid-in capital

     7,546        7,523   

Retained earnings

     63,012        59,597   

Accumulated other comprehensive loss

     (12,383     (12,344
  

 

 

   

 

 

 

Total shareholders’ equity

     63,541        60,142   
  

 

 

   

 

 

 

Total liabilities and shareholders’ equity

   $ 98,800      $ 106,545   
  

 

 

   

 

 

 

See notes to unaudited consolidated condensed financial statements.

 

4


SIFCO Industries, Inc. and Subsidiaries

Consolidated Condensed Statements of Cash Flows

(Unaudited)

(Amounts in thousands)

 

     Three Months Ended
December 31,
 
     2012     2011  

Cash flows from operating activities:

    

Net income

   $ 3,415      $ 1,186   

Income from discontinued operations, net of tax

     (2,494     (353

Adjustments to reconcile net income to net cash provided by operating activities:

    

Depreciation and amortization

     1,519        1,579   

Gain on disposal of operating assets

     (125     0   

LIFO expense (income)

     (178     159   

Share transactions under company stock plan

     24        239   

Other

     12        (6

Changes in operating assets and liabilities:

    

Receivables

     2,159        3,976   

Inventories

     (1,573     (3,211

Refundable income taxes

     0        262   

Prepaid expenses and other current assets

     (348     (342

Other assets

     (997     (121

Accounts payable

     (631     (1,848

Accrued liabilities

     1,636        (126

Other long-term liabilities

     351        (67
  

 

 

   

 

 

 

Net cash provided by operating activities of continuing operations

     2,770        1,327   

Net cash used for operating activities of discontinued operations

     (235     (35

Cash flows from investing activities:

    

Acquisition of business

     0        (24,809

Proceeds from disposal of operating assets

     125        0   

Capital expenditures

     (733     (473
  

 

 

   

 

 

 

Net cash used for investing activities of continuing operations

     (608     (25,282

Net cash provided by (used for) investing activities of discontinued operations

     8,676        (53

Cash flows from financing activities:

    

Proceeds from term note

     0        10,000   

Repayments of term note

     (500     (500

Proceeds from revolving credit agreement

     11,511        25,886   

Repayments of revolving credit agreement

     (22,155     (12,270

Proceeds from other debt

     0        2,400   

Dividends paid

     (1,073     (1,060

Other

     0        (28
  

 

 

   

 

 

 

Net cash provided by (used for) financing activities of continuing operations

     (12,217     24,428   
  

 

 

   

 

 

 

Increase (decrease) in cash and cash equivalents

     (1,614     385   

Cash and cash equivalents at the beginning of the period

     7,176        6,431   

Effect of exchange rate changes on cash and cash equivalents

     (13     (32
  

 

 

   

 

 

 

Cash and cash equivalents at the end of the period

   $ 5,549      $ 6,784   
  

 

 

   

 

 

 

Supplemental disclosure of cash flow information of continuing operations:

    

Cash paid for interest

   $ (122   $ (87

Cash paid for income taxes, net

     (219     (115

See notes to unaudited consolidated condensed financial statements.

 

5


SIFCO Industries, Inc. and Subsidiaries

Notes to Unaudited Consolidated Condensed Financial Statements

(Amounts in thousands, except per share data)

 

1.   Summary of Significant Accounting Policies

A. Principles of Consolidation

The accompanying unaudited consolidated condensed financial statements include the accounts of SIFCO Industries, Inc. and its wholly-owned subsidiaries (the “Company”). All significant intercompany accounts and transactions have been eliminated.

The U.S. dollar is the functional currency for all of the Company’s U.S. operations and its Irish subsidiary. For these operations, all gains and losses from completed currency transactions are included in income currently. Foreign currency translation adjustments are reported as a component of accumulated other comprehensive loss in the unaudited consolidated condensed financial statements.

These unaudited consolidated condensed financial statements should be read in conjunction with the consolidated financial statements and related notes included in the Company’s fiscal 2012 Annual Report on Form 10-K. The results of operations for any interim period are not necessarily indicative of the results to be expected for other interim periods or the full year. Certain prior period amounts may have been reclassified in order to conform to current period classifications.

B. Net Income per Share

The Company’s net income per basic share has been computed based on the weighted-average number of common shares outstanding. Net income per diluted share reflects the effect of the Company’s outstanding stock options, restricted shares and performance shares under the treasury stock method. The dilutive effect of the Company’s stock options, restricted shares and performance shares were as follows:

 

     Three Months  Ended
December 31,
 
     2012      2011  

Income from continuing operations

   $ 921       $ 833   

Income from discontinued operations, net of tax

     2,494         353   
  

 

 

    

 

 

 

Net income

   $ 3,415       $ 1,186   
  

 

 

    

 

 

 

Weighted-average common shares outstanding (basic)

     5,340         5,299   

Effect of dilutive securities:

     

Stock options

     1         26   

Restricted shares

     8         0   

Performance shares

     36         0   
  

 

 

    

 

 

 

Weighted-average common shares outstanding (diluted)

     5,385         5,325   
  

 

 

    

 

 

 

Net income per share – basic

     

Continuing operations

   $ 0.17       $ 0.16   

Discontinued operations

     0.47         0.06   
  

 

 

    

 

 

 

Net income

   $ 0.64       $ 0.22   
  

 

 

    

 

 

 

Net income per share – diluted:

     

Continuing operations

   $ 0.17       $ 0.16   

Discontinued operations

     0.46         0.06   
  

 

 

    

 

 

 

Net income

   $ 0.63       $ 0.22   
  

 

 

    

 

 

 

Outstanding share awards relating to approximately 105 and 142 weighted average shares were excluded from the calculation of diluted earnings per share for the three months ended December 31, 2012 and 2011, respectively, as the impact of including such share awards in the calculation of diluted earnings per share would have had an anti-dilutive effect.

 

6


C. Derivative Financial Instruments

The Company uses an interest rate swap agreement to reduce risk related to variable-rate debt, which is subject to changes in market rates of interest. The interest rate swap is designated as a cash flow hedge. At December 31, 2012, the Company held one interest rate swap agreement with a notional amount of $7,500. Cash flows related to the interest rate swap agreement are included in interest expense. The Company’s interest rate swap agreement and its variable-rate term debt are based upon LIBOR. During the first quarter of fiscal year 2013, the Company’s interest rate swap agreement qualified as a fully effective cash flow hedge against the Company’s variable-rate term note interest risk.

 

2.   Inventories

Inventories consist of:

 

     December 31,
2012
     September 30,
2012
 

Raw materials and supplies

   $ 6,001       $ 4,207   

Work-in-process

     7,567         9,156   

Finished goods

     5,688         4,142   
  

 

 

    

 

 

 

Total inventories

   $ 19,256       $ 17,505   
  

 

 

    

 

 

 

Inventories are stated at the lower of cost or market. Cost is determined using the last-in, first-out (“LIFO”) method for 46% and 44% of the Company’s inventories at December 31, 2012 and September 30, 2012, respectively. The first-in, first-out (“FIFO”) method is used for the remainder of the inventories. If the FIFO method had been used for the inventories for which cost is determined using the LIFO method, inventories would have been $9,359 and $9,537 higher than reported at December 31, 2012 and September 30, 2012, respectively.

 

3.   Goodwill and Intangible Assets

The Company’s intangible assets by major asset class subject to amortization consist of:

 

December 31, 2012

   Estimated
Useful Life
     Original
Cost
     Accumulated
Amortization
     Net Book
Value
 

Intangible assets:

           

Trade name

     10 years       $ 1,900       $ 302       $ 1,598   

Non-compete agreement

     5 years         1,500         439         1,061   

Below market lease

     5 years         900         370         530   

Customer relationships

     10 years         13,000         2,121         10,879   

Order backlog

     1 year         2,100         2,100         0   

Transition services agreement

     < 1 year         23         23         0   
     

 

 

    

 

 

    

 

 

 

Total intangible assets

      $ 19,423       $ 5,355       $ 14,068   
     

 

 

    

 

 

    

 

 

 

September 30, 2012

   Estimated
Useful Life
     Original
Cost
     Accumulated
Amortization
     Net Book
Value
 

Intangible assets:

           

Trade name

     10 years       $ 1,900       $ 254       $ 1,646   

Non-compete agreement

     5 years         1,500         364         1,136   

Below market lease

     5 years         900         325         575   

Customer relationships

     10 years         13,000         1,796         11,204   

Order backlog

     1 year         2,100         2,034         66   

Transition services agreement

     < 1 year         23         23         0   
     

 

 

    

 

 

    

 

 

 

Total intangible assets

      $ 19,423       $ 4,796       $ 14,627   
     

 

 

    

 

 

    

 

 

 

 

7


The amortization expense on identifiable intangible assets for the three months ended December 31, 2012 and 2011 was $559 and $815, respectively. Amortization expense associated with the identified intangible assets, all of which relates to the Forged Components Group, is expected to be as follows:

 

     Amortization
Expense
 

Fiscal year 2013

   $ 2,037   

Fiscal year 2014

     1,970   

Fiscal year 2015

     1,970   

Fiscal year 2016

     1,744   

Fiscal year 2017

     1,507   

The Company’s goodwill, all of which relates to the Forged Components Group is not being amortized and is subject to annual impairment tests. All of the goodwill is expected to be deductible for tax purposes.

 

4.   Accumulated Other Comprehensive Loss

The components of accumulated other comprehensive loss are as follows:

 

     December 31,
2012
    September 30,
2012
 

Foreign currency translation adjustment, net of tax

   $ (5,850   $ (5,566

Net retirement plan liability adjustment, net of tax

     (6,491     (6,720

Interest rate swap agreement adjustment, net of tax

     (42     (58
  

 

 

   

 

 

 

Total accumulated other comprehensive loss

   $ (12,383   $ (12,344
  

 

 

   

 

 

 

 

5.   Long-Term Debt

Long-term debt consists of:

 

     December 31,
2012
     September 30,
2012
 

Revolving credit agreement

   $ 694       $ 11,338   

Term loan

     7,500         8,000   

Promissory Note

     2,356         2,345   
  

 

 

    

 

 

 
     10,550         21,683   

Less – current maturities

     4,356         2,000   
  

 

 

    

 

 

 

Total long-term debt

   $ 6,194       $ 19,683   
  

 

 

    

 

 

 

In October 2011, the Company entered into an amendment to its existing credit agreement (the “Credit Agreement Amendment”) with its bank increasing the maximum borrowing amount from $30,000 to $40,000, of which $10,000 is a five (5) year term loan and $30,000 is a five (5) year revolving loan, secured by substantially all the assets of the Company and its U.S. subsidiaries and a pledge of 65% of the stock of its Irish subsidiary. The term loan is repayable in quarterly installments of $500 starting December 1, 2011.

The term loan has a Libor-based variable interest rate that was 2.2% at December 31, 2012 and which becomes an effective fixed rate of 2.9% after giving effect to an interest rate swap agreement. Borrowing under the revolving loan bears interest at a rate equal to Libor plus 0.75% to 1.75%, which percentage fluctuates based on the Company’s leverage ratio of outstanding indebtedness to EBITDA. At December 31, 2012, the interest rate was 1.25%. The loans are subject to certain customary financial covenants including, without limitation, covenants that require the Company to not exceed a maximum leverage ratio and to maintain a minimum fixed charge coverage ratio. There is also a commitment fee ranging from 0.10% to 0.25% to be incurred on the unused balance. The Company was in compliance with all applicable loan covenants as of December 31, 2012.

 

8


In connection with the acquisition of the QAF business, as discussed more fully in Note 11, the Company issued a non-interest bearing promissory note to the seller, which note is payable by the Company in November, 2013. The imputed interest rate used to discount the note was 2% per annum.

 

6.   Government Grants

In the past, the Company received grants from certain government entities as an incentive to invest in facilities, research and employees. Remaining grants, principally capital in nature, are amortized into income over the estimated useful lives of the related assets. The unamortized portion of deferred grant revenue recorded in other long-term liabilities at December 31, 2012 and September 30, 2012 was $338 and $334, respectively. The Company’s grants are denominated primarily in Euros. The Company adjusts its deferred grant revenue balance in response to currency exchange rate fluctuations for as long as such grants are treated as obligations.

 

7.   Income Taxes

For each interim reporting period, the Company makes an estimate of the effective tax rate it expects to be applicable for the full fiscal year for its continuing operations. This estimated effective rate is used in providing for income taxes on a year-to-date basis. The Company’s effective tax rate through the first three months of fiscal 2013 is 35%, compared to 31% for the same period in fiscal 2012, and differs from the U.S. federal statutory rate due primarily to (i) the impact of U.S. state and local income taxes, (ii) a domestic production activities deduction, (iii) application of tax credits, and (iv) the recognition of U.S. federal income taxes on undistributed earnings of non-U.S. subsidiaries. The income tax provision consists of the following:

 

     Three Months Ended
December 31,
 
     2012      2011  

Current income tax provision:

     

U.S. federal

   $ 419       $ 334   

U.S. state and local

     70         58   

Non-U.S

     6         15   
  

 

 

    

 

 

 

Total current tax provision

     495         407   

Deferred income tax provision (benefit):

     

U.S. federal

     0         (25

Non-U.S

     0         0   
  

 

 

    

 

 

 

Total deferred tax provision

     0         (25
  

 

 

    

 

 

 

Income tax provision

   $ 495       $ 382   
  

 

 

    

 

 

 

The Company is subject to income taxes in the U.S. federal jurisdiction, and various state, local and non-U.S. jurisdictions. The Company’s federal income tax return for fiscal 2011 and the amended federal income tax return for fiscal 2008 are under review by the Internal Revenue Service, the outcome of which is not known at this time. The Company believes it has appropriate support for its federal income tax returns. The Company is no longer subject to U.S. federal, state and local, or non-U.S. income tax examinations by tax authorities for fiscal years prior to 2006.

At December 31, 2012 and September 30, 2012, the Company recorded liabilities of $122 and $120, respectively, for uncertain tax positions and any related interest and penalties. The Company classifies any interest and penalties related to uncertain tax positions in income tax expense. A summary of activity related to the Company’s uncertain tax positions is as follows:

 

Balance at September 30, 2012

   $  120   

Increase due to tax positions taken in prior years

     2   
  

 

 

 

Balance at December 31, 2012

   $ 122   
  

 

 

 

 

 

9


8.   Retirement Benefit Plans

The Company and certain of its subsidiaries sponsor defined benefit pension plans covering most of its employees. The components of net periodic benefit cost of the Company’s defined benefit plans are as follows:

 

     Three Months Ended
December 31,
 
     2012     2011  

Service cost

   $ 75      $ 71   

Interest cost

     215        247   

Expected return on plan assets

     (372     (351

Amortization of prior service cost

     13        12   

Amortization of net loss

     215        210   
  

 

 

   

 

 

 

Net periodic benefit cost

   $ 146      $ 189   
  

 

 

   

 

 

 

Through December 31, 2012, the Company has made contributions in the amount of $174 to its defined benefit pension plans. The Company anticipates making $662 of additional contributions to fund its defined benefit pension plans during the balance of fiscal 2013.

 

9.   Stock-Based Compensation

In previous periods, the Company awarded stock options under its shareholder approved 1995 Stock Option Plan (“1995 Plan”) and 1998 Long-term Incentive Plan (“1998 Plan”). No further options may be awarded under either the 1995 Plan or the 1998 Plan. Option exercise price is not less than fair market value on date of grant and options are exercisable no later than ten years from date of grant. All options awarded under both plans are fully vested as of December 31, 2012.

At December 31, 2012 and 2011, there was no unrecognized compensation cost related to the stock options granted under the Company’s stock option plans. There was no compensation expense related to stock options recognized in the three months ended December 31, 2012 and 2011. There is one outstanding and exercisable option as of December 31, 2012, which is fully vested, has a weighted average remaining term of 2.5 years, and an intrinsic value of $12.

The Company has awarded performance and restricted shares under its shareholder approved 2007 Long-Term Incentive Plan (“2007 Plan”). The aggregate number of shares that may be awarded under the 2007 Plan is 600 less any shares previously awarded and subject to an adjustment for the forfeiture of any unissued shares. In addition, shares that may be awarded are subject to individual recipient award limitations. The shares awarded under the 2007 Plan may be made in multiple forms including stock options, stock appreciation rights, restricted or unrestricted stock, and performance related shares. Any such awards are exercisable no later than ten years from date of grant.

The performance shares that have been awarded under the 2007 Plan generally provide for the issuance of the Company’s common shares upon the Company achieving certain defined financial performance objectives during a period up to three years following the making of such award. The ultimate number of common shares of the Company that may be earned pursuant to an award ranges from a minimum of no shares to a maximum of 150% of the initial target number of performance shares awarded, depending on the level of the Company’s achievement of its financial performance objectives.

With respect to such performance shares, compensation expense is being accrued at (i) 100% of the target levels for recipients of the performance shares awarded during fiscal 2013, and (ii) 50% of the target levels for recipients of the performance shares awarded during fiscal 2012 and 2011. During each future reporting period, such expense may be subject to adjustment based upon the Company’s subsequent estimate of the number of common shares that it expects to issue upon the completion of the performance period. The performance shares were valued at the closing market price of the Company’s common shares on the date of grant. The vesting of such shares is determined at the end of the performance period.

The Company has awarded restricted shares to certain of its directors. The restricted shares were valued at the closing market price of the Company’s common shares on the date of grant, and such value was recorded as unearned compensation. The unearned compensation is being amortized ratably over the restricted stock vesting period of one (1) to three (3) years.

If all outstanding share awards are ultimately earned and issued at the target number of shares, then at December 31, 2012 there are approximately 368 shares that remain available for award. If any of the outstanding share awards are ultimately earned and issued at greater than the target number of shares, up to a maximum of 150% of such target, then a fewer number of shares would be available for award.

 

10


Compensation expense related to all performance and restricted shares awarded under the 2007 Plan was $24 and $239 during the first three months of fiscal 2013 and 2012, respectively. As of December 31, 2012, there was $1,258 of total unrecognized compensation cost related to the performance and restricted shares awarded under the 2007 Plan. The Company expects to recognize this cost over the next 2.8 years.

The following is a summary of activity related to the target number of shares awarded and the actual number of shares earned under the 2007 Plan:

 

     Number of
Shares
    Weighted
Average Fair
Value at Date
of Grant
 

Outstanding at September 30, 2012

     158      $ 18.30   

Performance shares awarded (2013 award)

     49        16.03   

Performance shares earned (2010 award)

     (29     15.75   

Awards forfeited (various awards)

     (28     17.00   
  

 

 

   

Outstanding at December 31, 2012

     150      $ 18.30   
  

 

 

   

 

10.   Business Segments

The Company identifies reportable segments based upon distinct products manufactured and services performed. The Forged Components Group (“Forge Group”) consists of the production, heat-treatment, surface-treatment, non-destructive testing and some machining of both conventional and precision forged components in various steel, titanium and aluminum alloys utilizing a variety of processes for application principally in the aerospace and power generation industries. The Turbine Component Services and Repair Group (“Repair Group”) consists primarily of the repair and remanufacture of small aerospace and industrial turbine engine components, and is also involved in providing precision component machining and industrial coating of turbine engine components. The Company’s reportable segments are separately managed. The following table summarizes certain information regarding segments of the Company’s continuing operations:

 

     Three Months Ended
December 31,
 
     2012     2011  

Net sales:

    

Forged Components Group

   $ 27,445      $ 22,688   

Turbine Component Services and Repair Group

     1,255        2,038   
  

 

 

   

 

 

 

Consolidated net sales

   $ 28,700      $ 24,726   
  

 

 

   

 

 

 

Operating income (loss):

    

Forged Components Group

   $ 3,548      $ 2,186   

Turbine Component Services and Repair Group

     (544     (133

Corporate unallocated expenses

     (1,557     (878
  

 

 

   

 

 

 

Consolidated operating income

     1,447        1,175   

Interest expense, net

     101        90   

Foreign currency exchange (gain) loss, net

     7        (13

Other income, net

     (77     (117
  

 

 

   

 

 

 

Consolidated income from continuing operations before income tax provision

   $ 1,416      $ 1,215   
  

 

 

   

 

 

 

Depreciation and amortization expense:

    

Forged Components Group

   $ 1,363      $ 1,428   

Turbine Component Services and Repair Group

     81        77   

Corporate unallocated expenses

     75        74   
  

 

 

   

 

 

 

Consolidated depreciation and amortization expense

   $ 1,519      $ 1,579   
  

 

 

   

 

 

 

LIFO expense (income) for the Forged Components Group

   $ (178   $ 159   

 

11


     December 31,
2012
     September 30,
2012
 

Identifiable assets

     

Forged Components Group

   $ 84,406       $ 84,518   

Turbine Component Services and Repair Group

     3,172         3,480   

Corporate

     11,222         12,063   

Assets of business held for sale

     0         6,484   
  

 

 

    

 

 

 

Consolidated total assets

   $ 98,800       $ 106,545   
  

 

 

    

 

 

 

 

11.   Business Acquisition

On October 28, 2011, through its wholly-owned subsidiary, Forge Acquisition, LLC – now known as Quality Aluminum Forge, LLC (“QAF”), the Company completed the purchase of the forging business and substantially all related operating assets from GEL Industries, Inc. (DBA Quality Aluminum Forge, Inc.). The forging business is operated in QAF’s Orange and Long Beach, California facilities, all of which are leased. The QAF purchase transaction was accounted for under the purchase method of accounting.

The results of operation of QAF from its date of acquisition are included in the Company’s unaudited consolidated condensed statements of operations and are reported in the Forge Group. The following unaudited pro forma information presents a summary of the results of operations for the Company including QAF as if the acquisition had occurred on October 1, 2011:

 

     Three Months Ended
December 31,
 
     2012      2011  

Net sales

   $ 28,700       $ 26,240   

Net income

     3,458         1,140   

Net income per share (basic)

     0.65         0.22   

Net income per share (diluted)

   $ 0.64       $ 0.21   

 

12.   Discontinued Operations, Assets Held for Sale, and Business Divestiture

On December 10, 2012, the Company completed the divestiture of its Applied Surface Concepts (“ASC Group”) business segment to Norman Hay plc, located in the United Kingdom. The Company received cash proceeds, net of certain transaction fees, of approximately $8,114 for this business and $994 was placed in escrow, pending the final working capital adjustment and/or indemnification holdback provisions under the sale agreement. The ASC Group business includes its U.S. operations, headquartered in Cleveland, Ohio, and three European operations located in France, Sweden and the United Kingdom. The ASC Group business develops, manufactures and sells selective plating products and provides contract services for low volume repair, refurbishment and OEM applications. The transaction resulted in a pre-tax gain of $4,014 in the first three months of fiscal 2013.

 

12


There were no assets or liabilities held for sale at December 31, 2012. The table below presents the components of the balance sheet accounts classified as assets and liabilities held for sale at September 30, 2012.

 

Assets:

  

Receivables, net

   $ 2,574   

Inventories

     1,188   

Deferred income taxes

     47   

Prepaid expenses and other current assets

     99   
  

 

 

 

Total current assets of business held for sale

   $ 3,908   
  

 

 

 

Property, plant and equipment, net

   $ 2,533   

Other assets

     43   
  

 

 

 

Total noncurrent assets of business held for sale

   $ 2,576   
  

 

 

 

Liabilities:

  

Current maturities of debt

   $ 2   

Accounts payable

     546   

Accrued liabilities

     623   
  

 

 

 

Total current liabilities of business held for sale

   $ 1,171   
  

 

 

 

Deferred income taxes

   $ 388   

Other long-term liabilities

     2   
  

 

 

 

Total noncurrent liabilities of business held for sale

   $ 390   
  

 

 

 

The financial results of ASC Group included in discontinued operations were as follows:

 

     Three Months Ended
December 31,
 
     2012      2011  

Net sales

   $ 2,727       $ 3,784   

Income before income tax provision

     180         517   

Provision for income taxes on operations

     48         164   
  

 

 

    

 

 

 

Income from operations, net of tax

     132         353   
  

 

 

    

 

 

 

Gain on sale of discontinued operations

     4,014         0   

Provision for income taxes on gain on sale

     1,652         0   
  

 

 

    

 

 

 

Gain on sale of discontinued operations, net of tax

     2,362         0   
  

 

 

    

 

 

 

Income from discontinued operations, net of tax

   $ 2,494       $ 353   
  

 

 

    

 

 

 

 

13


Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Management’s Discussion and Analysis of Financial Condition and Results of Operations may contain various forward-looking statements and includes assumptions concerning the Company’s operations, future results and prospects. These forward-looking statements are based on current expectations and are subject to risk and uncertainties. In connection with the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995, the Company provides this cautionary statement identifying important economic, political and technological factors, among others, the absence or effect of which could cause the actual results or events to differ materially from those set forth in or implied by the forward-looking statements and related assumptions. Such factors include the following: (1) the impact on business conditions in general, and on the demand for product in the aerospace and power generation industries in particular, of the global economic outlook, including the continuation of military spending at or near current levels and the availability of capital and liquidity from banks and other providers of credit; (2) future business environment, including capital and consumer spending; (3) competitive factors, including the ability to replace business which may be lost; (4) successful development of turbine component repair processes and/or procurement of new repair process licenses from turbine engine manufacturers and/or the Federal Aviation Administration; (5) metals and commodities price increases and the Company’s ability to recover such price increases; (6) successful development and market introduction of new products and services; (7) continued reliance on consumer acceptance of regional and business aircraft powered by more fuel efficient turboprop engines; (8) continued reliance on military spending, in general, and/or several major customers, in particular, for revenues; (9) the impact on future contributions to the Company’s defined benefit pension plans due to changes in actuarial assumptions, government regulations and the market value of plan assets; (10) stable governments, business conditions, laws, regulations and taxes in economies where business is conducted and (11) the ability to successfully integrate businesses that may be acquired into the Company’s operations.

The Company and its subsidiaries engage in the production and sale of a variety of metalworking processes, services and products produced primarily to the specific design requirements of its customers. The processes and services include both conventional and precision forging, heat-treating, coating, welding, and precision component machining and selective plating. The products include conventional and precision forged components, machined forged components, other machined metal components, and remanufactured component parts for turbine engines. The Company’s operations are conducted in two business segments: (1) Forged Components Group and (2) Turbine Component Services and Repair Group. The Company endeavors to plan and evaluate its businesses’ operations while taking into consideration certain factors including the following – (i) the projected build rate for commercial, business and military aircraft as well as the engines that power such aircraft, (ii) the projected build rate for industrial gas turbine engines, and (iii) the projected maintenance, repair and overhaul schedules for commercial, business and military aircraft as well as the engines that power such aircraft.

A. Results of Operations

Non-GAAP Financial Measures

Presented below is certain financial information based on our EBITDA and Adjusted EBITDA. References to “EBITDA” mean earnings from continuing operations before interest, taxes, depreciation and amortization, and references to “Adjusted EBITDA” mean EBITDA plus, as applicable for each relevant period, certain adjustments as set forth in the reconciliations of net income to EBITDA and Adjusted EBITDA.

Neither EBITDA nor Adjusted EBITDA is a measurement of financial performance under accounting principles generally accepted in the United States of America (“GAAP”). The Company presents EBITDA and Adjusted EBITDA because (i) it believes they are useful indicators for evaluating operating performance and liquidity, including the Company’s ability to incur and service debt and (ii) it uses EBITDA to evaluate prospective acquisitions. Although the Company uses EBITDA and Adjusted EBITDA for the reasons noted, the use of these non-GAAP financial measures as analytical tools has limitations and, therefore, reviewers of the Company’s financial information should not consider them in isolation, or as a substitute for analysis of its results of operations as reported in accordance with GAAP. Some of these limitations are:

 

   

Neither EBITDA nor Adjusted EBITDA reflects the interest expense, or the cash requirements necessary to service interest payments, on indebtedness;

 

   

Although depreciation and amortization are non-cash charges, the assets being depreciated and amortized will often have to be replaced in the future, and neither EBITDA nor Adjusted EBITDA reflects any cash requirements for such replacements;

 

   

The omission of the substantial amortization expense associated with the Company’s intangible assets further limits the usefulness of EBITDA and Adjusted EBITDA;

 

   

Neither EBITDA nor Adjusted EBITDA includes the payment of taxes, which is a necessary element of operations; and

 

14


   

Adjusted EBITDA excludes the cash expense the Company has incurred to acquire businesses.

Because of these limitations, EBITDA and Adjusted EBITDA should not be considered as measures of discretionary cash available to the Company to invest in the growth of its businesses. Management compensates for these limitations by not viewing EBITDA or Adjusted EBITDA in isolation and specifically by using other GAAP measures, such as net income, net sales and operating profit, to measure operating performance. Neither EBITDA nor Adjusted EBITDA is a measurement of financial performance under GAAP, and neither should be considered as an alternative to net income or cash flow from operations determined in accordance with GAAP. The Company’s calculation of EBITDA and Adjusted EBITDA may not be comparable to the calculation of similarly titled measures reported by other companies.

The following table sets forth a reconciliation of net income to EBITDA and Adjusted EBITDA:

 

(Dollars in thousands)    Three Months Ended
December 31,
 
     2012     2011  

Net income

   $ 3,415      $ 1,186   

Less: Income from discontinued operations, net of tax

     2,494        353   
  

 

 

   

 

 

 

Income from continuing operations

     921        833   

Adjustments:

    

Depreciation and amortization expense

     1,519        1,579   

Interest expense, net

     101        90   

Income tax provision

     495        382   
  

 

 

   

 

 

 

EBITDA

     3,036        2,884   

Adjustments:

    

Inventory purchase accounting adjustments (1)

     0        225   

Acquisition transaction-related expenses (2)

     15        137   

Equity compensation expense (3)

     24        239   

Non-recurring severance expense (4)

     813        0   

LIFO expense (income) (5)

     (178     159   
  

 

 

   

 

 

 

Adjusted EBITDA

   $ 3,710      $ 3,644   
  

 

 

   

 

 

 

 

(1) Represents accounting adjustments to inventory associated with acquisitions of businesses that were charged to cost of goods sold when the inventory was sold.
(2) Represents transaction-related costs comprising legal, financial and tax due diligence expenses; and valuation services costs that are required to be expensed as incurred.
(3) Represents the equity based compensation expense recognized by the Company under its 2007 Long-term Incentive Plan.
(4) Represents severance expense related to the departure of an executive officer.
(5) Represents the increase (decrease) in the reserve for inventories for which cost is determined using the last in, first out (“LIFO”) method.

Three Months Ended December 31, 2012 compared with Three Months Ended December 31, 2011

Net sales from continuing operations in the first quarter of fiscal 2013 increased 16.1% to $28.7 million, compared with $24.7 million in the comparable period in fiscal 2012 due primarily to a $4.7 million increase in the Forged Components Group’s net sales volume. Income from continuing operations in the first quarter of fiscal 2013 was $0.9 million, compared with $0.8 million in the comparable period of fiscal 2012. The $1.3 million increase in the Forged Components Group’s operating income in the first quarter of fiscal 2013 was partially offset by $0.8 million of non-recurring severance cost recognized in the first quarter of fiscal 2013 and a $0.4 million decrease in the Turbine Component Services and Repair Group’s operating income in the first quarter of fiscal 2013. Income from discontinued operations, net of tax, which consists of the Company’s former Applied Surface Concepts segment, was $2.5 million in the first quarter of fiscal 2013, compared with $0.4 million in the comparable period of fiscal 2012. Net income in the first quarter of fiscal 2013 was $3.4 million, compared with $1.2 million in the comparable period of fiscal 2012.

In December 2012, the Company completed the divestiture of its Applied Surface Concepts (“ASC Group”) business segment. In October 2011, the Company completed the purchase of the forging business and substantially all related operating assets from GEL Industries, Inc. (DBA Quality Aluminum Forge, Inc.) (“QAF”).

 

15


Forged Components Group (“Forge Group”)

The Forge Group consists of the production, heat-treatment, surface-treatment, non-destructive testing, and machining of both conventional and precision forged components in various steel, titanium and aluminum alloys utilizing a variety of processes for application principally in the aerospace and power generation industries. The Forge Group’s results for the first quarter of fiscal 2012 include the results of QAF from the date of its acquisition. Net sales in the first quarter of fiscal 2013 increased 21.0% to $27.4 million, compared with $22.7 million in the comparable period of fiscal 2012. The Forge Group produces forged components for (i) turbine engines that power commercial, business and regional aircraft as well as military aircraft and armored military vehicles; (ii) airframe applications for a variety of aircraft; (iii) industrial gas turbine engines for power generation units; and (iv) other commercial applications. Net sales comparative information for the first quarter of fiscal 2013 and 2012, respectively, is as follows:

 

(Dollars in millions)    Three Months Ended
December 31,
     Increase
(Decrease)
 

Net Sales

   2012      2011     

Aerospace components for:

        

Fixed wing aircraft

   $ 13.8       $ 10.7       $ 3.1   

Rotorcraft

     8.0         6.7         1.3   

Components for power generation units

     4.7         4.7         0.0   

Commercial product sales and other revenue

     0.9         0.6         0.3   
  

 

 

    

 

 

    

 

 

 

Total

   $ 27.4       $ 22.7       $ 4.7   
  

 

 

    

 

 

    

 

 

 

The increase in net sales of forged components for fixed wing aircraft during the first quarter of fiscal 2013, compared with the comparable period in fiscal 2012, is principally due to the impact of the acquisition of QAF during the first quarter of fiscal 2012 and additional sales volume. Net sales of aerospace components for rotorcraft increased in the first quarter of fiscal 2013 principally due to increased sales volumes.

The Forge Group’s aerospace components have both military and commercial applications. Net sales of such components that solely have military applications were $9.2 million in the first quarter of fiscal 2013, compared with $7.8 million in the comparable period in fiscal 2012. Demand for additional military helicopters and related replacement components are the primary driver of such military sales demand.

The Forge Group’s cost of goods sold increased $3.4 million to $21.6 million, or 78.6% of net sales, during the first quarter of fiscal 2013, compared with $18.1 million, or 80.0% of net sales in the comparable period of fiscal 2012. Cost of goods sold as a percentage of net sales decreased in the first quarter of fiscal 2013, compared with the comparable period in fiscal 2012, due to the net impact of the changes in the following components of manufacturing related expenditures:

 

   

The material component of manufacturing costs was approximately 32.5% of net sales during the first quarter of fiscal 2013, compared with 36.7% of net sales in the comparable period of fiscal 2012, due primarily to favorable material pricing and improvements in material utilization during the first quarter of fiscal 2013, compared with the comparable period of fiscal 2012.

 

   

All other manufacturing costs were approximately 46.1% of net sales during the first quarter of fiscal 2013, compared with 43.2% of net sales in the comparable period in fiscal 2012. Labor costs were 5.8% of net sales in the first quarter of fiscal 2013, compared with 5.2% of net sales in the comparable period in fiscal 2012, principally due to the mix of products sold—a higher concentration of products with higher value added content were sold during the first quarter of fiscal 2013, compared with the comparable period in fiscal 2012. The Forge Group also experienced a reduction in its labor efficiency during the first quarter of fiscal 2013.

 

16


The following changes in the components of the Forge Group’s other manufacturing overhead expenditures during the first quarter of fiscal 2013 compared with the comparable period of fiscal 2012, a portion of which was due to the acquisition of QAF, also impacted cost of goods sold:

 

(Dollars in millions)    Three Months Ended
December 31,
     Increase
(Decrease)
 

Manufacturing expenditures

   2012      2011     

Overhead:

        

Utilities

   $ 1.1       $ 1.1       $ 0.0   

Repairs, maintenance and supplies

     1.3         1.1         0.2   

Depreciation

     0.8         0.6         0.2   

Rent

     0.1         0.1         0.0   

Tooling

     0.8         0.7         0.1   

Manufacturing costs in the first quarter of fiscal 2013, compared with the same period in fiscal 2012, increased due to (i) an increase in manufacturing expenditures required to support the $4.8 million of additional product sales volume for the Forge Group and (ii) an increase in depreciation, primarily attributable to the acquisitions of QAF.

The Forge Group’s selling, general and administrative expenses were $2.4 million, or 8.9% of net sales, in the first quarter of fiscal 2013, compared with $2.4 million, or 10.4% of net sales, in the comparable period in fiscal 2012. The Forge Group’s selling, general and administrative expenses in the first quarter of fiscal 2013, before the impact of $0.5 million of amortization of intangible assets, was $1.9 million, or 6.9% of net sales. The Forge Group’s selling, general and administrative expenses in the first quarter of fiscal 2012, before the impact of $0.8 million of amortization of intangible assets, was $1.6 million or 6.8% of net sales.

The Forge Group’s operating income increased $1.3 million to $3.5 million in the first quarter of fiscal 2013, compared with $2.2 million in the comparable period in fiscal 2012. The following is a comparison of operating income on both a LIFO and FIFO basis:

 

(Dollars in millions)    Three Months Ended
December 31,
     Increase
(Decrease)
 

Operating Income

   2012     2011     

Operating income

   $ 3.5      $ 2.2       $ 1.3   

LIFO expense (income)

     (0.2     0.2         (0.4
  

 

 

   

 

 

    

 

 

 

Operating income without LIFO effect

   $ 3.3      $ 2.4       $ 0.9   
  

 

 

   

 

 

    

 

 

 

Operating income in the first quarter of fiscal 2013 was favorably impacted by (i) additional product sales volumes that resulted in part from the acquisition of QAF and (ii) favorable material pricing and improvements in material utilization. This was partially offset by higher labor and overhead principally related to the mix of product sold – a higher concentration of product sales with a higher value-added content were sold in the first quarter of fiscal 2013, compared with the same period in fiscal 2012.

The Forge Group’s backlog as of December 31, 2012 was $104.2 million, of which $87.0 million was scheduled for delivery over the next twelve months, compared with $106.0 million as of September 30, 2012, of which $87.8 million was scheduled for delivery over the next twelve months. All orders are subject to modification or cancellation by the customer with limited charges. Delivery lead times for certain raw materials (e.g. aerospace grades of steel) have shortened due to increased supply and the Forge Group believes that such lead time changes may ultimately result in a fundamental shift in the ordering pattern of its customers. The Forge Group believes that a likely result of such a shift is that customers may delay placing orders, which may result in a decrease, relative to comparable prior year periods, in the Forge Group’s backlog. Accordingly, such backlog decrease, to the extent it may occur, is not necessarily indicative of actual sales expected for any succeeding period.

Turbine Component Services and Repair Group (“Repair Group”)

Net sales, which consist principally of component repair services (including precision component machining and industrial coatings) for small aerospace turbine engines, decreased 38.4% in the first quarter of fiscal 2013 to $1.3 million, compared with $2.0 million in the comparable fiscal 2012 period. The decrease in net sales in the first quarter of fiscal 2013 is attributable to a decrease in sales volumes, compared with the same period in fiscal 2012.

 

17


The Repair Group’s cost of goods sold decreased $0.4 million to $1.4 million, or 114.1% of net sales, in the first quarter of fiscal 2013, compared with $1.8 million, or 88.5% of net sales, in the comparable period in fiscal 2012. Cost of goods sold as a percentage of net sales increased in the first quarter of fiscal 2013 compared with the comparable period in fiscal 2012 principally due to the Repair Group maintaining a minimum/base cost structure that has a large fixed component that is determined necessary to sustain an operation with relevant capabilities.

During the first quarter of fiscal 2013, the Repair Group’s selling, general and administrative expenses were $0.4 million, or 29.3% of net sales, compared with $0.4 million, or 18.0% of net sales, in the comparable fiscal 2012 period.

The Repair Group’s operating income decreased $0.4 million to a loss of $0.5 million in the first quarter of fiscal 2013, compared with a loss of $0.1 million in the comparable period in fiscal 2012. Operating income in the first quarter of fiscal 2013 was negatively impacted by the lower sales volumes in relation to the fixed portion of the Repair Group’s operating cost structure.

The Repair Group’s backlog was $0.9 million as of December 31, 2012 compared with $1.0 million as of September 30, 2012. At December 31, 2012, $0.1 million of the total backlog was scheduled for delivery over the next twelve months.

Corporate Unallocated Expenses

Corporate unallocated expenses, consisting of corporate salaries and benefits, legal and professional and other expenses that are not related to and, therefore, not allocated to the business segments, were $1.6 million in the first quarter of fiscal 2013, compared with $0.9 million in the same period in fiscal 2012. This increase is primarily due to $0.8 million of non-recurring severance costs incurred in the first quarter of fiscal 2013.

Other/General

Interest expense was $0.1 million in both the first quarter of fiscal 2013 and 2012. In connection with the October 2011 acquisition of the QAF business, the Company borrowed $12.4 million from its revolving credit agreement and $10.0 million on a term note, and issued a $2.4 million promissory note to the seller of the QAF business. The following table sets forth the weighted average interest rates and weighted average outstanding balances under the Company’s debt agreement in the first quarters of both fiscal 2013 and 2012:

 

     Weighted Average
Interest Rate
Three Months Ended
December 31,
    Weighted Average
Outstanding Balance
Three Months Ended
December 31,
 
     2012     2011     2012      2011  

Revolving credit agreement

     1.3     1.3   $  8.4 million       $  10.0 million   

Term note

     2.9     2.9   $ 7.8 million       $ 9.8 million   

Promissory note

     2.0     2.0   $ 2.3 million       $ 2.3 million   

Other income, net consists principally of $0.1 million of rental income earned from the lease of the Cork, Ireland facility.

Income from Discontinued Operations, Net of Tax

Net income from discontinued operations, net of tax, increased $2.1 million to $2.5 million in the first quarter of fiscal 2013, compared with $0.4 million in the comparable period in fiscal 2012, primarily due to the after tax gain of $2.4 million on the sale of the ASC Group during the first quarter of fiscal 2013.

B. Liquidity and Capital Resources

Cash and cash equivalents decreased $1.6 million to $5.5 million at December 31, 2012 from $7.2 million at September 30, 2012. At December 31, 2012, essentially all of the $5.5 million of the Company’s cash and cash equivalents were in the possession of its non-operating Irish subsidiary. Distributions from the Company’s Irish subsidiary to the Company may be subject to statutory restriction, adverse tax consequences or other limitations.

The Company’s operating activities provided $2.5 million of cash (of which $2.8 million was from continuing operations) in the first quarter of fiscal 2013 compared with $1.3 million of cash provided by operating activities (of which essentially the entire $1.3 million was from continuing operations) in the first quarter of fiscal 2012. The $2.8 million of cash provided by operating activities from continuing operations in the first quarter of fiscal 2013 was primarily due to (i) income from

 

18


continuing operations of $0.9 million; (ii) $1.3 million from the impact of such non-cash items as depreciation and amortization expense, deferred taxes, equity based compensation expense and LIFO income; (iii) and a $2.2 million decrease in accounts receivable and a $1.6 million increase in accrued liabilities. These items were partially offset by (i) a $1.6 million increase in inventories, a $0.3 million increase in prepaid expenses, and a $1.0 million increase in other non-current assets; along with (ii) a $0.6 million decrease in accounts payable. These changes were due primarily to recognition of an accrual of nonrecurring severance related to the departure of an executive officer and factors resulting from normal business conditions of the Company, including (i) to support growth in business, (ii) the relative timing of collections from customers, (iii) the relative timing of payments to suppliers and tax authorities, and (iv) recognition of escrow funds receivable related to the divestiture of the Applied Surface Concepts business.

Capital expenditures were $0.7 million in the first quarter of fiscal 2013 compared with $0.5 million in the comparable fiscal 2012 period. Capital expenditures during the first quarter of fiscal 2013 consist of $0.6 million by the Forge Group and $0.1 million by the Repair Group. In addition to the $0.7 million expended during the first quarter of fiscal 2013, $0.9 million has been committed as of December 31, 2012. The Company anticipates that total fiscal 2013 capital expenditures will be within the range of $3.5 to $4.5 million and will relate principally to the expansion of the Forge Group’s production capabilities.

As described more fully in note 11 to the unaudited consolidated condensed financial statements, the Company acquired a forging business in October 2011 for approximately $24.9 million. The acquisition was financed by borrowing approximately $22.4 million from its bank, which borrowing consisted of a new $10.0 million term loan and drawing approximately $12.4 million from its revolving credit facility. The balance of the acquisition was financed by the Company issuing a $2.4 million promissory note to the seller.

As described more fully in note 12 to the unaudited consolidated condensed financial statements, the Company completed the divestiture of its Applied Surface Concepts (“ASC Group”) business segment in December 2012. The Company received net cash proceeds of approximately $8.1 million, net of certain transaction fees,. These proceeds were used to pay down the Company’s revolving loan. In conjunction with this divestiture, the Company’s ASC Group non-U.S. subsidiaries paid a $1.1 million cash dividend to the Company. Proceeds from this dividend were used to pay down the Company’s revolving loan during the first quarter of fiscal 2013.

In October 2011, the Company entered into an amendment to its existing credit agreement (the “Credit Agreement Amendment”) with its bank increasing the maximum borrowing amount from $30.0 million to $40.0 million, of which $10.0 million is a five (5) year term loan and $30.0 million is a five (5) year revolving loan, secured by substantially all the assets of the Company and its U.S. subsidiaries and a pledge of 65% of the stock of its Irish subsidiary. The term loan is repayable in quarterly installments of $0.5 million starting December 1, 2011.

The term loan has a variable interest rate based on Libor, which becomes an effective fixed rate of 2.9% after giving effect to an interest rate swap agreement. Borrowing under the revolving loan bears interest at a rate equal to Libor plus 0.75% to 1.75%, which percentage fluctuates based on the Company’s leverage ratio of outstanding indebtedness to EBITDA. The bank loans are subject to certain customary financial covenants including, without limitation, covenants that require the Company to not exceed a maximum leverage ratio and to maintain a minimum fixed charge coverage ratio. There is also a commitment fee ranging from 0.10% to 0.25% to be incurred on the unused balance. The promissory note issued to the seller is non-interest bearing and is due in November of 2013. The Company was in compliance with all applicable loan covenants as of December 31, 2012.

Future cash flows from the Company’s U.S. operations will be used to pay down amounts outstanding under the Company’s credit agreement. The Company believes it has adequate cash/liquidity available to finance its U.S. operations from the combination of (i) the Company’s expected cash flows from the U.S. operations and (ii) funds available under its existing credit agreement.

C. Impact of Newly Issued Accounting Standards

 

Item 4. Controls and Procedures

As defined in Rule 13a-15(e) under the Securities Exchange Act of 1934 (the “Exchange Act”), disclosure controls and procedures are controls and procedures designed to ensure that information required to be disclosed in reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported on a timely basis, and that such information is accumulated and communicated to management, including the Company’s Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure. The Company’s disclosure controls and procedures include components of the Company’s internal control over financial reporting. In designing and evaluating the disclosure controls and procedures, management recognizes that any controls and procedures, no matter how

 

19


well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and management is required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures. Management of the Company, under the supervision and with the participation of the Chief Executive Officer and Chief Financial Officer, carried out an evaluation of the effectiveness of the design and operation of the Company’s disclosure controls and procedures pursuant to Exchange Act Rule 13a-15(e) as of December 31, 2012 (the “Evaluation Date”). Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that, as of the Evaluation Date, the Company’s disclosure controls and procedures were effective. Accordingly, management has concluded that the unaudited consolidated condensed financial statements in this Form 10-Q fairly present, in all material respects, the Company’s financial position, results of operations and cash flows for the periods presented.

There were no changes to the Company’s internal controls over financial reporting during the quarter ended December 31, 2012, which would be expected to have a material effect on financial reporting.

 

Part II. Other Information

 

Item 6. (a) Exhibits

The following exhibits are filed with this report or are incorporated herein by reference to a prior filing in accordance with Rule 12b-32 under the Securities and Exchange Act of 1934 (Asterisk denotes exhibits filed with this report.).

 

Exhibit
No.

  

Description

  3.1    Third Amended Articles of Incorporation of SIFCO Industries, Inc., filed as Exhibit 3(a) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference
  3.2    SIFCO Industries, Inc. Amended and Restated Code of Regulations dated January 29, 2002, filed as Exhibit 3(b) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference
  4.1    Credit and Security Agreement among Fifth Third Bank and SIFCO Industries, Inc. (and subsidiaries) dated December 10, 2010, filed as Exhibit 4.23 to the Company’s Form 8-K dated December 10, 2010 and incorporated herein by reference
  4.2    First Amendment and Joinder to Credit and Security Agreement among Fifth Third Bank and SIFCO Industries, Inc. (and subsidiaries) dated October 28, 2011, filed as Exhibit 4.2 to the Company’s Form 8-K dated October 28, 2011 and incorporated herein by reference
*9.1    Voting Trust Agreement dated January 31, 2013
10.1    SIFCO Industries, Inc. 1998 Long-term Incentive Plan, filed as Exhibit 10.3 of the Company’s Form 10-Q dated June 30, 2004, and incorporated herein by reference
10.2    SIFCO Industries, Inc. 1995 Stock Option Plan, filed as Exhibit 10(d) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference
10.3    Change in Control Severance Agreement between the Company and Frank Cappello, dated September 28, 2000, filed as Exhibit 10(g) of the Company’s Form 10-Q/A dated December 31, 2000, and incorporated herein by reference
10.4    Change in Control Severance Agreement between the Company and Remigijus Belzinskas, dated September 28, 2000, filed as Exhibit 10(i) of the Company’s Form 10-Q/A dated December 31, 2000, and incorporated herein by reference
10.5    Separation Pay Agreement between Frank A. Cappello and SIFCO Industries, Inc. dated December 16, 2005, filed as Exhibit 10.14 of the Company’s Form 10-K dated September 30, 2005, and incorporated herein by reference
10.6    Amendment No. 1 to Change in Control Severance Agreement between the Company and Frank Cappello, dated February 5, 2007, filed as Exhibit 10.17 of the Company’s Form 10-Q dated December 31, 2006 and incorporated herein by reference
10.7    Amendment No. 1 to Change in Control Severance Agreement between the Company and Remigijus Belzinskas, dated February 5, 2007, filed as Exhibit 10.18 of the Company’s Form 10-Q dated December 31, 2006 and incorporated herein by reference
10.8    SIFCO Industries, Inc. 2007 Long-Term Incentive Plan, filed as Exhibit A of the Company’s Proxy and Notice of 2008 Annual Meeting to Shareholders dated December 14, 2007, and incorporated herein by reference
10.9    Letter Agreement between the Company and Jeffrey P. Gotschall, dated August 12, 2009 filed as Exhibit 10.1 of the Company’s Form 8-K dated August 12, 2009 and incorporated herein by reference 10.1 of the Company’s Form 8-K dated August 12, 2009 and incorporated herein by reference.

 

20


Exhibit
No.

  

Description

  10.10    Interim Chief Executive Officer Agreement, dated as of August 31, 2009, by and among SIFCO Industries, Inc., Aviation Component Solutions and Michael S. Lipscomb and incorporated herein by reference
  10.11    Amended and Restated Change in Control and Severance Agreement, between James P. Woidke and SIFCO Industries, Inc., dated April 27, 2010 filed as Exhibit 10.15 of the Company’s Form 8-K dated April 30, 2010, and incorporated herein by reference
  10.12    Asset Purchase Agreement between T&W Forge, Inc and TWF Acquisition, LLC (a wholly-owned subsidiary of SIFCO Industries Inc.) dated December 10, 2010 filed as Exhibit 10.14 to the Company’s Form 8-K dated December 10, 2010, and incorporated herein by reference
  10.13    Amendment No. 1 to the SIFCO Industries, Inc. 2007 Long-Term Incentive Plan, filed as Exhibit A of the Company’s Proxy and Notice of 2011 Annual Meeting to Shareholders dated December 15, 2010, and incorporated herein by reference
  10.14    Asset Purchase Agreement between GEL Industries, Inc (DBA Quality Aluminum Forge) and Forge Acquisition, LLC (a wholly-owned subsidiary of SIFCO Industries Inc.) dated October 28, 2011, filed as Exhibit 10.16 to the Company’s Form 8-K dated October 28, 2011, and incorporated herein by reference
  10.15    Separation Agreement between the Company and Frank Cappello, dated December 31, 2012, filed as Exhibit 10.1 to the Company’s Form 8-K dated January 3, 2013, and incorporated herein by reference
  14.1    Code of Ethics, filed as Exhibit 14.1 of the Company’s Form 10-K dated September 30, 2003, and incorporated herein by reference
*31.1    Certification of Chief Executive Officer pursuant to Rule 13a-14(a) / 15d-14(a)
*31.2    Certification of Chief Financial Officer pursuant to Rule 13a-14(a) / 15d-14(a)
*32.1    Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350
*32.2    Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350
*101    The following financial information from SIFCO Industries, Inc. Quarterly Report on Form 10-Q for the quarter ended December 31, 2012 filed with the SEC on February 11, 2013, formatted in XBRL includes: (i) Consolidated Condensed Statements of Operations for the fiscal periods ended December 31, 2012 and 2011, (ii) Consolidated Condensed Statements of Comprehensive Income for the fiscal periods ended December 31, 2012 and 2011, (iii) Consolidated Condensed Balance Sheets at December 31, 2012 and September 30, 2012, (iv) Consolidated Condensed Statements of Cash Flow for the fiscal periods ended December 31, 2012 and 2011, and (iv) the Notes to the Consolidated Condensed Financial Statements.

 

21


SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereto duly authorized.

 

    SIFCO Industries, Inc.
    (Registrant)
Date: February 11, 2013    

/s/ Michael S. Lipscomb

   

    Michael S. Lipscomb

    President and Chief Executive Officer

    (Principal Executive Officer)

Date: February 11, 2013    

/s/ Catherine M. Kramer

   

    Catherine M. Kramer

    Vice President-Finance and

    Chief Financial Officer

    (Principal Financial Officer)

   

 

 

 

22