Form 10-K
Table of Contents

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

 

FORM 10-K

(Mark One)

x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended January 1, 2011

OR

 

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from              to             

Commission file number: 0-13470

 

 

NANOMETRICS INCORPORATED

(Exact name of registrant as specified in its charter)

 

Delaware   94-2276314

(State or other jurisdiction of

incorporation or organization)

 

(I.R.S. Employer

Identification Number)

1550 Buckeye Drive

Milpitas, California

  95035
(Address of principal executive offices)   (Zip Code)

Registrant’s telephone number, including area code: (408) 545-6000

Securities registered pursuant to Section 12(b) of the Act:

Common Stock, $0.001 par value per share

The NASDAQ Stock Market LLC

(NASDAQ Global Market)

Securities registered pursuant to Section 12(g) of the Act:

None

 

 

Indicate by check mark if the Registrant is a well-known seasoned issuer as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x.

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  x.

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨.

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ¨    No  ¨.

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ¨

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definitions of “large accelerated filer”, “accelerated filer”, and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large accelerated filer   ¨    Accelerated filer   x
Non-accelerated filer   ¨    Smaller reporting company   ¨

Indicate by check mark whether the Registrant is a shell company (as defined by Rule 12b-2 of the Securities Exchange Act of 1934)    Yes  ¨    No  x.

As of July 3, 2010, the last business day of the Registrant’s most recently completed second fiscal quarter, the aggregate market value of the common stock of Registrant held by non-affiliates, based upon the closing sales price for the Registrant’s common stock for such date, as quoted on the NASDAQ Global Market, was $165,932,240. Shares of common stock held by each officer and director and by each person who owned 5% or more of the outstanding common stock have been excluded because such persons may be deemed to be “affiliates” as that term is defined under the rules and regulations of the Exchange Act. This determination of affiliate status is not necessarily a conclusive determination for any other purpose.

The number of shares of the Registrant’s common stock outstanding as of March 4, 2011 was 22,679,369.

 

 

DOCUMENTS INCORPORATED BY REFERENCE

The Registrant has incorporated by reference into Part III of this Annual Report on Form 10-K portions of its Proxy Statement for its 2011 Annual Meeting of Stockholders to be filed pursuant to Regulation 14A. The Proxy Statement will be filed within 120 days of Registrant’s fiscal year ended January 1, 2011.

 

 

 


Table of Contents

NANOMETRICS INCORPORATED

FORM 10-K

FOR THE FISCAL YEAR ENDED JANUARY 1, 2011

TABLE OF CONTENTS

 

PART I

          4   
  ITEM 1.      BUSINESS      4   
  ITEM 1A.      RISK FACTORS      10   
  ITEM 1B.      UNRESOLVED STAFF COMMENTS      20   
  ITEM 2.      PROPERTIES      20   
  ITEM 3.      LEGAL PROCEEDINGS      21   
  ITEM 4.      REMOVED AND RESERVED      21   

PART II

          21   
  ITEM 5.      MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES      21   
  ITEM 6.      SELECTED FINANCIAL DATA      25   
  ITEM 7.      MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS      26   
  ITEM 7A.      QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK      38   
  ITEM 8.      FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA      39   
  ITEM 9.      CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE      75   
  ITEM 9A.      CONTROLS AND PROCEDURES      75   
  ITEM 9B.      OTHER INFORMATION      76   

PART III

          77   
  ITEM 10.      DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE      77   
  ITEM 11.      EXECUTIVE COMPENSATION      77   
  ITEM 12.      SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS      77   
  ITEM 13.      CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS AND DIRECTOR INDEPENDENCE      77   
  ITEM 14.      PRINCIPAL ACCOUNTING FEES AND SERVICES      77   

PART IV

          78   
  ITEM 15.      EXHIBITS AND FINANCIAL STATEMENT SCHEDULE      78   

SIGNATURES

          79   

 

2


Table of Contents

Forward-Looking Statements

Certain statements contained in this Annual Report on Form 10-K that are not purely historical are “forward-looking statements” within the meaning of the federal securities laws, including, without limitation, statements regarding our expectations, beliefs, anticipations, commitments, intentions and strategies regarding the future. In some cases you can identify forward-looking statements by terms such as “may,” “could,” “would,” “might,” “will,” “should,” “expect,” “plan,” “intend,” “forecast,” “anticipate,” “believe,” “estimate,” “predict,” “potential,” “continue” or the negative of these terms or other comparable terminology. Actual results could differ from those projected in any forward-looking statements for the reasons, among others, detailed in “Risk Factors” in Item 1A. The forward-looking statements are made as of the date of this Form 10-K and we assume no obligation to update the forward-looking statements, or to update the reasons why actual results could differ from those projected in the forward-looking statements.

 

3


Table of Contents

PART I

 

ITEM 1. BUSINESS

Overview

Nanometrics is a leading provider of advanced, high-performance process control metrology systems used primarily in the fabrication of semiconductors, high-brightness LEDs, data storage devices and solar photovoltaics. Nanometrics’ automated and integrated metrology systems measure critical dimensions, device structures, overlay registration, topography and various thin film properties, including film thickness as well as optical, electrical and material properties. The company’s process control solutions are deployed throughout the fabrication process, from front-end-of-line substrate manufacturing, to high-volume production of semiconductors and other devices, to advanced wafer-scale packaging applications. Nanometrics’ systems enable device manufacturers to improve yields, increase productivity and lower their manufacturing costs.

Nanometrics was incorporated in California in 1975, and reincorporated in Delaware in 2006. Nanometrics has been publicly traded since 1984 (NASDAQ: NANO). We have been a pioneer and innovator in the field of optical metrology. Nanometrics has an extensive installed base of over 6,500 systems in over 150 production factories worldwide. Our major customers and original equipment manufacturer (“OEM”) partners include Samsung Electronics Co. Ltd., Intel Corporation, Hynix Semiconductor, Inc., Applied Materials, Inc., IM Flash Technologies, Toshiba Corporation, Western Digital Corporation, Taiwan Semiconductor Manufacturing Company Limited, and Inotera Memories, Inc.

Additional information about Nanometrics is available on our website at http://www.nanometrics.com. The information that can be accessed through our website, however, is not part of this Annual Report. Our investor relations web page is located at http://www.nanometrics.com/investor.html. Our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and any amendments to those reports are available on our web page as soon as reasonably practicable after we electronically file or furnish such materials to the United States Securities and Exchange Commission (“SEC”). In addition, the reports and materials that we file with the SEC are available at the SE’s website (http://www.sec.gov) and at the SEC’s Public Reference Room at 100 F Street, NE, Washington DC 20549. Interested parties may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330.

Industry Background

We participate in the sale, design, manufacture, marketing and support of thin film, optical critical dimension and overlay dimension metrology systems used for semiconductor manufacturing. Semiconductor devices are primarily packaged as chips within electronic devices, including cell phones, MP3 players and personal computers. Chips are made up of semiconductor material layers integrating millions or billions of transistors and other electronic components, connected through a complex wiring scheme of small copper or aluminum wires, ultimately packaged into thin form factors to be mounted on circuit boards. Our core focus is the measurement and control of the structure, composition, and geometry of the devices from the transistor layer through advanced wafer-scale packaging to improve device performance and manufacturing yield. Our end customers manufacture many types of chips for a multitude of applications, each having unique manufacturing challenges. This includes chips to enable information processing and management (logic chips), memory storage (NAND, NOR, and DRAM), thin film head components for Hard Disk Drives, and analog devices (e.g., Wi-Fi and 3G radio chips).

Semiconductors are also the principal component in solar photovoltaic cells (Solar PV) for power generation and used in devices for power control (compound semiconductors) and HB-LEDs for consumer, architectural, and industrial lighting applications. Our systems measure properties of these devices for improving efficiency and manufacturing yield.

Demand for our products continues to be driven by our customers’ desire for higher overall chip performance, and improvements in power efficiency, logic processing capability, data storage volume and manufacturing yield. To achieve these goals, our customers have increased their use of more complex materials and processing methods in their manufacturing flow. The majority of our chip customers manufacture devices with features as small as 65nm to32nm, and in some cases our customers are implementing new materials and methods in high volume manufacturing, including high dielectric constant (or high-k) materials and double patterning lithography which have features as small as 22nm. The use of these new materials and methods require additional levels of process control and metrology and we believe has had the effect of increasing demand for our products. Currently, next-

 

4


Table of Contents

generation devices with features as small as 22nm are in early production, which in turn likely will require new advancements in metrology capabilities. DRAM memory makers are shifting to 3x node production with development for 2x node devices ongoing. Non-volatile memory makers of NAND and NOR devices are ramping 2x node de vices into high volume manufacturing with work extending into early 1x node development. Foundry and logic manufacturers are ramping production of both 3x and 2x node devices, beginning investment into 1x node devices. Thin Film Head components for hard disk drives are being driven into new regimes to support next generation hard disk drives with ever increasing storage capacity requiring continued improvements in read and write head component scaling.

Our Business

We offer a comprehensive line of metrology products and technologies to address the manufacturing requirements of the semiconductor manufacturing industry. Our systems measure and characterize the physical dimensions, material composition, optical and electrical characteristics and other critical parameters of semiconductors from initial wafer substrate manufacturing through final packaging. For the photolithographic process, overlay and critical dimension systems provide control of layer alignment and device dimensions. Advanced packaging technology requires metrology systems to control wafer scale features for through silicon via (“TSV”) and flip chip technologies. Our metrology systems for materials monitor the physical, optical, and electrical characteristics of materials including compound semiconductor, and silicon wafers.

We are continually working to strengthen our competitive position by developing new technologies and products in our market segment. We have expanded our product offerings to address growing applications within the semiconductor manufacturing industry. In furtherance of our goals, we have :

 

   

Introduced new products in every core product line and primary market served;

 

   

Restructured our business and practices for operational and earnings leverage;

 

   

Diversified our product line and served markets through acquisitions, such as the 2006 acquisition of Accent Optical Technologies, Inc. a supplier of overlay and thin film metrology and process control systems; the 2008 acquisition of Tevet Process Control Technologies (“Tevet”), an integrated metrology supplier serving both semiconductor and solar PV industries; and the 2009 acquisition of the Unifire™ product line from Zygo Corporation;

 

   

Continued development of new integrated measurement technologies for advanced fabrication processes; and

 

   

Researched and developed innovative applications of existing technology to new market opportunities within the solar PV, HB-LED, and data storage industries.

Nanometrics Products

We currently offer a complete line of systems to address the broad range of metrology requirements of the semiconductor manufacturing industry. In addition, we believe that our engineering expertise, strategic acquisitions, supplier alliances and short-cycle production strategies enable us to develop and offer advanced process control solutions in the future that should address industry advancement and trends.

Automated Standalone Systems

Our automated systems are made up of both semi-automated and fully automated metrology systems which are employed in high-volume and low-volume production environments. The Atlas® XP/Atlas XP+ and Atlas-M represent our line of high-performance metrology systems providing thin film, wafer stress, optical critical dimension (“OCD”®), and diffraction-based overlay (“DBO”) for transistor and interconnect metrology applications. The OCD technology is supported by our NanoCD™ suite of solutions including our NanoDiffract® software and NanoGen® scalable computing engine that enables visualization, modeling, and analysis of complex structures. The Caliper Mosaic™ provides cost effective overlay metrology solutions, for today’s advanced 300mm overlay process technologies, and is available on our Lynx™ platform. The Unifire™ system enables users to measure multiple parameters at any given process step in the advanced packaging process flow for critical dimension, overlay, and topography applications.

 

5


Table of Contents

We continue to offer automated products for 200mm factories running nominally at 90nm nodes and above, as well as systems supporting micro-electrical mechanical systems (“MEMS”). Our Q240AT is a 200mm overlay metrology system that incorporate the same measurement technology as the Caliper Mosaic™, which thereby extends the technology capability of our customers’ existing factories. The IVS®-185 system supports critical dimension and overlay measurements for semiconductor, MEMS, and HB-LED manufacturing. The NanoSpec® 9100 thin film measurement system is capable of handling wafers ranging in size from 75 to 200 mm in diameter, and is used in all segments of semiconductor manufacturing, including data storage head manufacturing.

System Platform

The Lynx™ cluster metrology platform enables improved cost of ownership to our customers by combining our Caliper Mosaic™ and IMPULSE® metrology systems in configurations to provide high throughput, reduced footprint systems for leading 300mm wafer metrology applications including OCD, DBO, overlay, and thin film process control.

Integrated Systems

Our integrated metrology (“IM”) systems are installed directly onto wafer processing equipment to provide near real-time measurements for improved process control and maximum throughput. Our IM systems are sold directly to end customers and through OEM channels. The IMPULSE® system is our latest metrology platform for OCD, DBO, and thin film metrology and has been successfully qualified on numerous OEM platforms. Our 90x0 system is qualified for OEM and direct sales supporting thin film and OCD applications. Our NanoCD™ solutions suite is sold in conjunction with our IMPULSE® and 90x0 systems. Our Trajectory™ system provides in-line measurement of layers in thin film thickness and composition in solar cell and semiconductor applications.

Materials Characterization

The Materials Characterization products include systems that are used to monitor the physical, optical, electrical and material characteristics of HB-LED, compound semiconductor, strained silicon and silicon-on-insulator (“SOI”) devices, including composition, crystal structure, layer thickness, dopant concentration, contamination and electron mobility. Tabletop systems are used to manually or semi-automatically measure thin films in engineering and low-volume production environments. Our tabletop models have multiple capabilities and several available configurations, depending on wafer handling, range of films to be measured, uniformity mapping and other customer needs.

Our VerteX™ is a photoluminescence (“PL”) mapping system designed for high-volume compound semiconductor metrology applications. The RPMBlue™ is our latest PL mapping system designed specifically for the HB-LED segment. We support Fourier-Transform Infrared (“FTIR”) automated and manual systems in the QS2200/3300 and QS1200 respectively. The FTIR systems are spectrometers designed for non-destructive wafer analysis for various applications. The NanoSpec line of products includes the 3000 and 6100 supporting thin film measurement across all segments in both low volume production and research applications.

Our metrology systems can be categorized as follows:

 

System

  

Market

  

Applications

System Platform
Lynx™    Semiconductor    Platform
OCD Analysis      
NanoDiffract®    Semiconductor    OCD
NanoGen®    Semiconductor    OCD
Automated Standalone Systems      
AtlasXP®/Atlas XP+®/ AtlasXPM®    Semiconductor    Film Thickness, Film Stress, CD
Caliper Mosaic™    Semiconductor    Overlay
Unifire™    Semiconductor    Film Thickness, Overlay, CD, and Advanced Packaging Applications

 

6


Table of Contents

System

  

Market

  

Applications

Q240AT    Semiconductor    Overlay
IVS®-185    Semiconductor, MEMS    Overlay, CD
NanoSpec® 9100    Semiconductor    Film Thickness
Integrated Systems      
IMPULSE®    Semiconductor    Film Thickness, CD
9010 Series    Semiconductor    Film Thickness, CD
9000 Series    Semiconductor    Film Thickness
Trajectory    Semiconductor, Solar    Film Thickness, Composition
Materials Characterization Instruments   
RPMBlue™    HB-LED    Epitaxial Layer Properties
VerteX™    Compound Semiconductor, Solar PV, HB-LED    Epitaxial Layer Properties
QS1200   

Substrate Semiconductor,

Solar PV

   Substrate Properties, Film Composition and Thickness
QS2200/3300    Substrate Semiconductor    Substrate Properties, Film Composition
NanoSpec 3000    Semiconductor    Film Thickness (Tabletop)
NanoSpec 6100    Semiconductor    Film Thickness (Tabletop)

Customers

We sell our metrology systems worldwide to several semiconductor manufacturers and equipment suppliers, producers of HB-LEDs, solar PV panels, data storage devices, silicon wafers and photomasks. The majority of our systems are sold to customers located in Asia and the United States. Three customers, Samsung Electronics Co. Ltd., Intel Corporation and Hynix Semiconductor, Inc. represented 23.0%, 16.4% and 12.8% of our total net revenues in the fiscal year 2010, respectively.

Sales and Marketing

We believe that the capability for direct sales and support is beneficial for developing and maintaining close customer relationships and for rapidly responding to changing customer requirements. We provide local direct sales, service and application support through our worldwide offices located in the United States, South Korea, Japan, Europe, Taiwan, China and Singapore and work with selected sales representatives in the United States and other countries. Our employees include our technical applications team, which is comprised of technically experienced sales engineers who are knowledgeable in the use of metrology systems generally and the unique features and advantages of our specific products. Supported by our technical applications team, our sales and support teams work closely with our customers to offer cost-effective solutions to complex measurement and process problems.

Direct exports of our metrology systems to our foreign customers and shipments to our foreign subsidiaries international offices require general export licenses.

Net revenues from customers located in the United States and in foreign countries, as a percentage of total net revenues, for fiscal years 2010, 2009 and 2008, were as follows:

 

     2010     2009     2008  

United States

     34.6     29.7     29.5

South Korea

     28.8     39.1     20.5

Japan

     10.5     14.7     28.0

China

     9.3     4.1     7.3

Taiwan

     8.5     4.7     5.8

Europe

     3.8     5.0     5.2

All other countries

     4.5     2.7     3.7

 

7


Table of Contents

Customer Service and Support

We believe that customer service and technical support for our systems are important factors that distinguish us from our competitors and are essential to building and maintaining close, long-term relationships with our customers. We provide system support to our customers through factory technical support and globally deployed field service offices. The factory technical support operations provide both OEM and end-user customers with telephonic technical support access, direct training programs, operating manuals and other technical support information to enable effective use of our metrology and measurement instruments and systems. In addition, our systems support group provides online and telephonic technical support to both OEM and end-user customers with respect to the software that we sell in connection with our measurement systems hardware. We coordinate warranty and post-warranty field service and spare parts support from our corporate headquarters in Milpitas, California. We also have field service operations based in various locations throughout the United States and Europe. In Asia, service is provided by direct offices in Japan, South Korea, Taiwan and China.

We provide a standard one-year warranty on parts and labor for all our products. Service revenue, including sales of replacement parts, represented 17.8%, 35.9% and 26.0% of total net revenues in 2010, 2009 and 2008, respectively.

Backlog

As of January 1, 2011 and January 2, 2010, the end of fiscal year 2010 and 2009, respectively, our backlog was $31.4 million and $8.1 million, respectively. Backlog includes orders for products that we expect to ship within 12 months. Orders from our customers are subject to cancellation or delay by the customer without penalty. Historically, order cancellations and order rescheduling have not been significant. However, orders presently in backlog could be canceled or rescheduled. Because only a portion of our revenues in prior fiscal quarters represented systems in backlog, we do not believe that current backlog is necessarily an accurate indication of our future revenues or financial performance.

Competition

We offer different products for various sectors of semiconductor manufacturing, and several of our products extend across the same process flow. However, in each of these sectors, we have multiple competitors. In every segment in which we participate, the global semiconductor equipment industry is intensely competitive, and driven by rapid technological adoption cycles. Our ability to effectively compete depends upon our ability to continually improve our products, applications and services, and our ability to develop new products, applications and services that meet constantly evolving customer requirements.

We believe that our competitive position in each of our markets is based on the ability of our products and services to address customer requirements related to numerous competitive factors. Competitive selections are based on many factors involving technological innovation, productivity, total cost of ownership of the system, including impact on end of line yield, price, product performance and throughput capability, quality, reliability and customer support.

In the automated segment, our principal competitors are KLA-Tencor Corporation and Nova Measuring Instruments Ltd. for thin film, overlay, and critical dimension metrology. Our primary competitor in the integrated metrology segment is Nova Measuring Instruments Ltd., while the HB-LED and solar PV markets are served by numerous competitors and no single competitor or group of competitors has established a majority position.

Manufacturing

In 2008, we consolidated our manufacturing operations to our Milpitas, California facility and various contract manufacturers. It is our strategy to outsource all assemblies that do not contain elements that we believe lead to a direct competitive advantage. The majority of our automated and integrated products are currently manufactured at our Milpitas facility. We perform limited

 

8


Table of Contents

sub-assembly for certain products at our York, England facility. We also use contract manufacturers in China, Israel, Japan and other locations in the United States. During the manufacturing process, we combine proprietary measurement technology produced in our facilities with components and sub-assemblies obtained from outside suppliers. We currently do not expect our manufacturing operations to require additional major investments in capital equipment.

We have internalized the production of key parts and components. However, certain components, sub-assemblies and services necessary for the manufacture of our systems are obtained either from a sole supplier or limited group of suppliers.

Research and Development

We continue to invest in R&D to ensure that Nanometrics’ products stay in the forefront of current and future market demands. Whether it is for an advancement of current technology, new technology, or the development of a new application in our core or emerging markets, we are committed to product excellence and longevity. We have several facilities located worldwide that focus on this objective.

In 2010 our R&D investment was focused on new platforms as well as continuing to improve the metrology capability and lower the cost of ownership of our installed tools. R & D efforts for these improvements resulted in a material increase in the footprint of the Atlas XP+® in the marketplace. Additionally, the IMPULSE® IM system was adapted and qualified by numerous original equipment manufacturers (OEMs) as an option to extend the performance of wafer processing tools. Our Caliper Mosaic™ line’s capability was extended into the next silicon manufacturing technology node with system enhancements. The UniFire™ system now serves multiple segments of the fabrication process flow with metrology enhancements for lithography and CMP control in addition to the advanced packaging applications. The new products and capabilities that we introduced to the market in 2010 were adopted by customers in key segments, which we believe indicates that our R&D spending is targeted and focused on appropriate products and technologies. Our R&D expenditures for each of the last three fiscal years were as follows:

 

     Fiscal Year  
     2010     2009     2008  

Research and Development

      

R&D Expenditures (in millions)

   $ 19.0      $ 14.7      $ 17.1   

R&D Expenditures as percentage of revenues

     10.1     19.1     16.8

Patents and Intellectual Property

Our success depends in large part on the technical innovation of our products and protecting such innovations through a variety of methods. We actively pursue a program of filing patent applications to seek protection of technologically sensitive features of our metrology systems. We believe that our success will depend to a greater degree upon innovation, technological expertise and our ability to adapt our products to new technology. While we attempt to establish our intellectual property rights through patents and trademarks and protect intellectual property rights through non-disclosure agreements, we may not be able to fully protect our technology, and competitors may be able to develop similar technology independently. Others may obtain patents and assert them against us. In addition, the laws of certain foreign countries may not protect our intellectual property to the same extent as do the laws of the United States. From time to time we receive communications from third parties asserting that our metrology systems may contain design features that the third parties claim, may infringe upon their proprietary rights. We typically refer such matters to our legal counsel. For more information, see Item 3, “Legal Proceedings.”

Employees

At January 1, 2011, we employed 456 persons worldwide with sales, applications and service support in key geographic areas. None of our employees are represented by a union and we have never experienced a work stoppage as a result of union actions. Many of our employees have specialized skills that are of value to us. Our future success will depend in large part upon our ability to attract and retain highly skilled scientific, technical and managerial personnel, who are in great demand in our industry. We consider our employee relations to be good.

 

9


Table of Contents

Executive Officers of the Registrant

The names of our executive officers and their ages, titles and biographies as of January 1, 2011 are set forth below:

 

Name

   Age     

Position

Timothy J. Stultz, Ph.D.      62       President, Chief Executive Officer and Director
Bruce A. Crawford      58       Chief Operating Officer
James P. Moniz      53       Chief Financial Officer

Timothy Stultz has served as President, Chief Executive Officer and a director of Nanometrics since August 2007. Prior to joining Nanometrics, Dr. Stultz served in a number of executive management positions within the high tech community including President and CEO of Imago Scientific Instruments Corporation, President and Chief Executive Officer of ThauMDx, VP and General Manager of Veeco Metrology Systems and President and Chief Executive Officer of Peak Systems. Dr. Stultz received his B.S., M.S. and Ph.D. in Materials Science and Engineering from Stanford University.

Bruce A. Crawford has served as our Chief Operating Officer since July 2006. From July 2005 to July 2006, Mr. Crawford served as President and Chief Operating Officer of Accent Optical Technologies, Inc., a supplier of process control and metrology systems to the global semiconductor manufacturing industry, which we acquired in July 2006. From February 2003 to July 2005, Mr. Crawford served as Accent Optical’s Chief Operating Officer and Executive Vice President and from October 2000 to February 2003, he served as Vice President of Worldwide Operations. Mr. Crawford holds an A.S. degree from De Anza College.

James P. Moniz was appointed as Chief Financial Officer (and our principal accounting officer) on February 18, 2009. On November 16, 2010, Mr. Moniz announced his intent to resign effective April 1, 2011, however, Mr. Moniz has acted as the Company’s Chief Financial Officer (and principal accounting officer) since such announcement. On March 3, 2011 we announced the appointment of Ronald W. Kisling as our Chief Financial Officer (and principal accounting officer), effective March 14, 2011. Mr. Moniz will continue to serve as our Chief Financial Officer (and principal accounting officer) until March 14, 2011, and thereafter will continue to be employed by the Company and assist in the transition until April 1, 2011, the date of Mr. Moniz’s retirement. Prior to joining the Company, Mr. Moniz served as Chief Financial Officer of Photon Dynamics, Inc., a global supplier of flat panel display test equipment, from April 2008 until October 2008. From October 2000 until February 2008, Mr. Moniz was Chief Financial Officer, Treasurer and Assistant Secretary of Nextest Systems Corporation. Mr. Moniz holds bachelor degrees in Accounting and Marketing, as well as an MBA in Finance, from San Jose State University.

Ronald W. Kisling has been appointed as Chief Financial Officer (and principal accounting officer) of the Company effective March 14, 2011. Prior to joining the Company, Mr. Kisling served as Chief Financial Officer of PGP Corporation (acquired by Symantec Corporation in June 2010) from May 2010 to September 2010 and Vice President of Finance from December 2006 to May 2010. Mr. Kisling has over 25 years of finance experience and has served as Chief Financial Officer of or held other similar finance positions at Portal Software, Inc. (acquired by Oracle Corporation in July 2006) from March 2004 to November 2006, Saba Software, Inc. from June 2001 to March 2004, SPL WorldGroup (acquired by Oracle Corporation in November 2006) from August 1998 to June 2001, and Symantec Corporation from April 1989 to August 1998. Mr. Kisling holds a B.A. in Economics from Stanford University and is an inactive Certified Public Accountant.

 

ITEM 1A. RISK FACTORS

In addition to the other information contained in this Annual Report on Form 10-K, we have identified the following risks and uncertainties that may have a material adverse effect on our business, financial condition or results of operations. Investors should carefully consider the risks described below before making an investment decision. The risks described below are not the only ones we face. Additional risks not presently known to us or that we currently believe are immaterial may also impair our business operations. Our business could be harmed by any of these risks. The trading price of our common stock could decline due to any of these risks and investors may lose all or part of their investment. This section should be read in conjunction with the Consolidated Financial Statements and Notes thereto, and Management’s Discussion and Analysis of Financial Condition and Results of Operations contained in this Form 10-K.

 

10


Table of Contents

The risks and uncertainties described below are not the only ones that we face. If any of the following risks actually occurs, our business, financial condition or operating results could be harmed. In such case, the trading price of our common stock could decline, and you could lose all or part of your investment.

The slowing in the general economy and the cyclical nature of the semiconductor industry have caused us losses in the past and reductions in available cash, and may, in the future, negatively impact our financial performance.

The recent recession and gradual recovery of the global economy and the cyclical nature of the semiconductor industry, have impacted and could impact future customer demand for our products and our financial performance. The degree of this impact will depend on a number of factors, including the timing and extent of recovery of the U.S. and global economy from the recession. Demand for semiconductor equipment depends, in large parts, on consumer spending. Economic uncertainty may lead to a decrease in consumer spending and may cause certain customers to cancel or delay placing orders. If we are unable to timely and appropriately adapt to changes resulting from difficult economic conditions, our business, financial condition and results of operations may be adversely affected, and we may be required to raise additional funds through public or private equity or debt financings. In that event, financing may not be available or we could be forced to obtain financing on terms that are not favorable to us and, in the case of anequity or convertible debt financing, which may result in dilution to our stockholders.

We may also experience supplier or customer issues as a result of adverse macroeconomic conditions. If our customers have difficulties in obtaining capital or financing, this could result in lower sales. Customers with liquidity issues could also result in an increase in bad debt expense. These conditions could also affect our key suppliers, which could affect their ability to supply parts and result in delays of our customer shipments.

Due to the cyclical nature of the industry, we may need to take actions to reduce costs in the future, which could reduce our ability to significantly invest in research and development at levels we believe are necessary. If we are unable to effectively align our cost structure with prevailing market conditions, our business, financial condition and results of operations may be materially and adversely affected.

Our largest customers account for a substantial portion of our revenue, and our revenue would materially decline if one or more of these customers were to purchase significantly fewer of our systems.

Historically, a significant portion of our revenues in each quarter and each year has been derived from sales to relatively few customers, and we expect this trend to continue. There are only a limited number of large companies operating in the semiconductor industry. Accordingly, we expect that we will continue to depend on a small number of large customers for a significant portion of our revenues for the foreseeable future. If our current relationships with our large customers are impaired, or if we are unable to develop similar collaborative relationships with important customers in the future, our revenues could significantly decline.

 

11


Table of Contents

Some of our current and potential competitors have significantly greater resources than we do, and increased competition could impair sales of our products.

We operate in the highly competitive semiconductor industry and face competition from a number of companies, many of which have greater financial, engineering, manufacturing, marketing and customer support resources than we do. As a result, our competitors may be able to respond more quickly to new or emerging technologies or market developments by devoting greater resources to the development, promotion and sale of products, which could impair sales of our products. Moreover, there has been merger and acquisition activity among our competitors and potential competitors. These transactions by our competitors and potential competitors may provide them with a competitive advantage over us by enabling them to rapidly expand their product offerings and service capabilities to meet a broader range of customer needs. Many of our customers and potential customers in the semiconductor industry are large companies that require global support and service for their metrology systems. Some of our larger or more geographically diverse competitors might be better equipped to provide this global support.

Because of the high cost of switching equipment vendors in our markets, it may be difficult for us to attract customers from our competitors even if our metrology systems are superior to theirs.

We believe that once a semiconductor customer has selected one vendor’s metrology system, the customer generally relies upon that system and, to the extent possible, subsequent generations of the same vendor’s system, for the life of the application. Once a vendor’s metrology system has been installed, a customer must often make substantial technical modifications and may experience downtime in order to switch to another vendor’s metrology system. Accordingly, unless our systems offer performance or cost advantages that outweigh a customer’s expense of switching to our systems, it will be difficult for us to achieve significant sales from that customer once it has selected another vendor’s system for an application.

We depend on Original Equipment Manufacturer (“OEM”) suppliers for sales of our integrated metrology systems, and the loss of our OEM suppliers as customers could harm our business.

We believe that sales of integrated metrology systems will continue to be an important source of our revenues. Sales of our integrated metrology systems depend upon the ability of OEMs to sell semiconductor manufacturing equipment products that include our metrology systems as components. If our OEM customers are unable to sell such products, or if they choose to focus their attention on products that do not integrate our systems, our business could suffer. If we were to lose our OEM customers for any reason, our ability to realize sales from integrated metrology systems would be diminished, which would harm our business.

We obtain some of the components and subassemblies included in our systems from a single source or a limited group of suppliers, and the partial or complete loss of one of these suppliers could cause production delays and significant loss of revenue.

We rely on outside vendors to manufacture many components and subassemblies. Certain components, subassemblies and services necessary for the manufacture of our systems are obtained from a sole supplier or a limited group of suppliers. We do not maintain any long-term supply agreements with any of our suppliers. We have entered into arrangements with J.A. Woollam Co., Inc. for the purchase of the spectroscopic ellipsometer component incorporated into our advanced measurement systems. We also have supply agreements with MPA and Spectral Systems, and subcontract manufacturing agreements with Fox Semiconductor, IFAT and Toho Technologies. In June 2009, we signed a supply agreement with Zygo Corporation to supply OEM interferometer sensors for incorporation into the Unifire™ line of products as well as Nanometrics’ family of automated metrology systems. Our reliance on a sole or a limited group of suppliers involves several risks, including the following:

 

   

we may be unable to obtain an adequate supply of required components;

 

   

we have reduced control over pricing and the timely delivery of components and subassemblies; and

 

   

our suppliers may be unable to develop technologically advanced products to support our growth and development of new systems.

Some of our suppliers have relatively limited financial and other resources. Because the manufacturing of certain of these components and subassemblies involves extremely complex processes and requires long lead times, we may experience delays or shortages caused by our suppliers. If we were forced to seek alternative sources of

 

12


Table of Contents

supply or to manufacture such components or subassemblies internally, we could be forced to redesign our systems, which could increase our cost structure, cause production delays and prevent us from shipping our systems to customers on a timely basis. Any inability to obtain adequate deliveries from our suppliers, or any other circumstance that would restrict our ability to ship our products, could damage relationships with current and prospective customers, harm our business and result in significant loss of revenue.

Our success depends on the performance of our senior management and on our ability to identify, hire and retain key management personnel.

We have experienced turnover in our senior management team. Our Chief Executive Officer joined the Company in August 2007 and in September 2008, our former Chief Financial Officer and Vice President, Administration, who joined us in November 2007, was replaced, on an interim basis, by Bruce Crawford, our Chief Operating Officer. Our former Chief Accounting Officer also resigned in December 2008. James P. Moniz was appointed as Chief Financial Officer (and our principal accounting officer) on February 18, 2009. On November 16, 2010, Mr. Moniz gave notice that he intends to resign as the Company’s Chief Financial Officer (and principal accounting officer) effective April 1, 2011. Since giving such notice, Mr. Moniz has acted and continues to act as the Company’s Chief Financial Officer (and principal accounting officer). On March 3, 2011 we announced the appointment of Ronald W. Kisling as our Chief Financial Officer (and principal accounting officer), effective March 14, 2011. Mr. Moniz will continue to serve as our Chief Financial Officer (and principal accounting officer) until March 14, 2011, and thereafter will continue to be employed by the Company and assist in the transition until April 1, 2011, the date of Mr. Moniz’s retirement. Our business may be harmed as a result of the transition or if we are unable to effectively integrate Mr. Kisling.

Although we have employment agreements with certain key members of our senior management team, including Messrs. Stultz, Crawford and Kisling, these individuals or other key employees may still leave the Company. We do not have key person life insurance on any of our executives. In addition, to support our future growth, we will need to attract and retain additional qualified employees. Competition for such personnel in our industry is intense, and we may not be successful in attracting and retaining qualified employees. If we fail to attract, motivate and retain qualified senior management personnel, our business could be harmed and our ability to implement our strategy could be compromised.

Restructuring of our operations may disrupt our business and adversely affect our financial condition and operating results.

Since 2007, we have taken steps, including reductions in force, facility closures, and internal reorganizations to reduce the size and cost of our operations and to better match our resources with our market opportunities. We may take similar steps in the future to improve efficiency and match our resources with market opportunities, and as a result of such actions, we may incur restructuring expenses. In the first and third quarters of 2008, we undertook a restructuring that involved a reduction of our global workforce by approximately 30 and 34 employees, respectively, which action caused us to record restructuring and reorganization charges of $0.9 million and $0.6 million, respectively. In the first and second quarters of 2009, we reduced the global workforce further by 51 and 25 employees, respectively, and recorded restructuring charges of $0.7 million and $0.4 million, respectively. Since the second quarter of 2009, we have not made any further workforce reductions or recorded any restructuring charges, however, a material slowdown in our business could cause us to reduce our workforce as we have done in the past.

Several factors could cause a restructuring to adversely affect our business, financial condition and results of operations. These include potential disruption of our operations, the development of our technology, our supply chain and other aspects of our business. Employee morale and productivity could also suffer and result in unintended employee attrition. Loss of sales, service and engineering talent, in particular, could damage our business. Any restructuring would require substantial management time and attention and may divert management from other important work. If we undertake further employee reductions or other restructuring activities, we will likely record restructuring and related expenses and accounting charges. Accounting charges may include inventory and technology-related write-offs, workforce reduction costs and charges relating to consolidation of excess facilities, and if we are required to take a substantial charge related to any future restructuring activities, our results of operations would be adversely affected in the period in which we take such a charge. Moreover, we could encounter delays in executing any restructuring plans, which could cause further disruption and additional unanticipated expense.

 

13


Table of Contents

Failure to achieve and maintain effective internal controls in accordance with Section 404 of the Sarbanes-Oxley Act of 2002 could have a material effect on our business.

As a publicly traded company, we are subject to rules adopted by the SEC pursuant to Section 404 of the Sarbanes-Oxley Act of 2002. Section 404 requires us to include an internal control report from management in our Annual Report on Form 10-K. The internal control report must include the following: (1) a statement of management’s responsibility for establishing and maintaining adequate internal control over financial reporting, (2) a statement identifying the framework used by management to conduct the required evaluation of the effectiveness of our internal control over financial reporting and (3) management’s assessment of the effectiveness of our internal control over financial reporting as of the end of each fiscal year, including a statement as to whether or not internal control over financial reporting is effective. We are required to obtain a statement that our independent registered public accounting firm has issued an attestation report on management’s internal control over financial reporting for the 2010 fiscal year. If we report any material weakness in our internal controls, public perception of the Company may be adversely impacted, which in turn could cause a decline in the market value of our stock. We may also have to devote substantial resources to correcting any deficiencies.

If we deliver systems with defects, our credibility will be harmed, revenue from, and market acceptance of, our systems will decrease and we could expend significant capital and resources as a result of such defects.

Notwithstanding our internal quality specifications, our systems have sometimes contained errors, defects and bugs when introduced. If we deliver systems with errors, defects or bugs, our credibility and the market acceptance and sales of our systems would be harmed. Further, if our systems contain errors, defects or bugs, we may be required to expend significant capital and resources to alleviate such problems. Defects could also lead to product liability lawsuits against us or against our customers. We have agreed to indemnify our customers in some circumstances against liability arising from defects in our systems. In the event of a successful product liability claim, we could be obligated to pay damages significantly in excess of our product liability insurance limits.

If we experience significant delays in shipping our products to our customers, our business and reputation may suffer.

Our products are complex and require technical expertise to design and manufacture properly. Various problems occasionally arise during the manufacturing process that may cause delays and/or impair product quality. Any significant delays stemming from the failure of our products to meet or exceed our internal quality specifications, or for any other reasons, would delay our shipments. Shipment delays could harm our business and reputation in the industry.

Third party infringement claims could be costly to defend, and successful infringement claims by third parties could result in substantial damages, lost product sales and the loss of important intellectual property rights by us.

Our commercial success depends, in part, on our ability to avoid infringing or misappropriating patents or other proprietary rights owned by third parties. From time to time we may receive communications from third parties asserting that our metrology systems may contain design features which are claimed to infringe on their proprietary rights. For example, in August 2005, we were served with a complaint by KLA-Tencor, or KLA, alleging that certain of our products infringe two of KLA’s patents, Patent No. 6,483,580 and Patent No. 6,590,656. In January 2006, KLA added Patent No. 6,611,330 to its claim. For additional information, refer to Part I, Item 3 “Legal Proceedings.” Our new or current products may infringe valid intellectual property rights, but even if our products do not infringe, we may be required to expend significant sums of money to defend against infringement claims, or to actively protect our intellectual property rights through litigation.

Our intellectual property may be infringed by third parties despite our efforts to protect it, which could threaten our future success and competitive position and harm our operating results.

Our future success and competitive position depend in part upon our ability to obtain and maintain proprietary technology for our principal product families, and we rely, in part, on patent, trade secret and trademark law to protect that technology. If we fail to adequately protect our intellectual property, it will be easier for our competitors to sell competing products. We own or may license patents relating to our metrology systems, and have filed applications for additional patents. Any of our pending patent applications may be rejected, and we may not in the future be able to develop additional proprietary technology that is patentable. In addition, the patents we own, have been issued or licensed, may not provide us with competitive advantages and may be challenged by third parties. Third parties may also design around these patents.

 

14


Table of Contents

In addition to patent protection, we rely upon trade secret protection for our confidential and proprietary information and technology. We routinely enter into confidentiality agreements with our employees. However, in the event that these agreements may be breached, we may not have adequate remedies. Our confidential and proprietary information and technology might also be independently developed by or become otherwise known to third parties. We may be required to initiate litigation in order to enforce any patents issued to or licensed by us, or to determine the scope or validity of a third party’s patent or other proprietary rights. Any such litigation, regardless of outcome, could be expensive and time consuming, and could subject us to significant liabilities or require us to re-engineer our product or obtain expensive licenses from third parties, any of which would adversely affect our business and operating results.

Our efforts to protect our intellectual property may be less effective in some foreign countries where intellectual property rights are not as well protected as in the United States.

In 2010, 2009 and 2008, 65.4%, 70.3% and 70.5%, respectively, of our total net revenues were derived from sales to customers in foreign countries, including certain countries in Asia, such as Japan, South Korea, China, Singapore and Taiwan. The laws of some foreign countries do not protect our proprietary rights to as great an extent as do the laws of the United States, and many U.S. companies have encountered substantial problems in protecting their proprietary rights against infringement in such countries. If we fail to adequately protect our intellectual property in these countries, it would be easier for our competitors to sell competing products and our business would suffer.

Variations in the amount of time it takes for us to sell our systems may cause fluctuations in our operating results, which could cause our stock price to decline.

Variations in the length of our sales cycles could cause our revenues to fluctuate widely from period to period. Our customers generally take long periods of time to evaluate our metrology systems. We expend significant resources educating and providing information to our prospective customers regarding the uses and benefits of our systems. The length of time that it takes for us to complete a sale depends upon many factors, including:

 

   

the efforts of our sales force and our independent sales representatives;

 

   

the complexity of the customer’s metrology needs;

 

   

the internal technical capabilities and sophistication of the customer;

 

   

the customer’s budgetary constraints; and

 

   

the quality and sophistication of the customer’s current processing equipment.

Because of the number of factors influencing the sales process, the period between our initial contact with a customer and the time at which we recognize revenue from that customer, if at all, varies widely. Our sales cycles, including the time it takes for us to build a product to customer specifications after receiving an order, typically range from three to nine months. Occasionally our sales cycles can be much longer, particularly with customers in Asia who may require longer evaluation periods. During the sales cycles, we commit substantial resources to our sales efforts in advance of receiving any revenue, and we may never receive any revenue from a customer despite our sales efforts.

If we do complete a sale, customers often purchase only one of our systems and then evaluate its performance for a lengthy period of time before purchasing additional systems. The purchases are generally made through purchase orders rather than through long-term contracts. The number of additional products that a customer purchases, if any, depends on many factors, including a customer’s capacity requirements. The period between a customer’s initial purchase and any subsequent purchases is unpredictable and can vary from three months to a year or longer. Variations in the length of this period could cause fluctuations in our operating results, which could adversely affect our stock price.

Relatively small fluctuations in our system sales volume may cause our operating results to vary significantly each quarter.

During any quarter, a significant portion of our revenue is derived from the sale of a relatively small number of systems. Our automated metrology systems range in price from approximately $200,000 to over $1,600,000 per system, and our integrated metrology systems range in price from approximately $80,000 to $500,000 per system. Accordingly, a small change in the number or mix of systems that we sell could cause significant changes in our operating results.

 

15


Table of Contents

We depend on orders that are received and shipped in the same quarter, and therefore our results of operations may be subject to significant variability from quarter to quarter.

Our net sales in any given quarter depend upon a combination of orders received in that quarter for shipment in that quarter and shipments from backlog. Our backlog at the beginning of each quarter does not include all systems sales needed to achieve expected revenues for that quarter. Consequently, we are dependent on obtaining orders for systems to be shipped in the same quarter that the order is received. Moreover, customers may reschedule shipments, and production difficulties could delay shipments. Accordingly, we have limited visibility into future product shipments, and our results of operations may be subject to significant variability from quarter to quarter.

If we fail to develop new and enhanced metrology systems we will likely lose market share to our competitors.

We operate in an industry that is subject to rapid technological changes, changes in customer demands and the introduction of new, higher performance systems with short product life cycles. To be competitive, we must continually design, develop and introduce in a timely manner new metrology systems that meet the performance and price demands of semiconductor manufacturers and suppliers. We must also continue to refine our current systems so that they remain competitive. We may experience difficulties or delays in our development efforts with respect to new systems, and we may not ultimately be successful in developing them. Any significant delay in releasing new systems could adversely affect our reputation, give a competitor a first-to-market advantage or allow a competitor to achieve greater market share.

Lack of market acceptance for our new products may affect our ability to generate revenue and may harm our business.

In 2008, we introduced several products to the market including the NanoCD™ suite, Impulse® and the Lynx™ platform. In 2009, we introduced the Atlas® XP+ system as the follow-on to our Atlas metrology system and our Caliper Mosaic™ overlay system. In 2010, the capability of our NanoCD™ suite was extended with launches of our new modeling and analysis software, NanoDiffract®, and migration to the latest generation of cluster computers for fabrication wide analysis (NanoGen®). Our materials characterization products, including the RPMBlue™ and Trajectory system continued to gain acceptance at established and emerging customers in the HB-LED and solar segments of the market. We have invested substantial time and resources into the development of these products. However, we cannot accurately predict the future level of acceptance of our new products by our customers. As a result, we may not be able to generate anticipated revenue from sales of these products or future new products or improvements.

We depend on new products and processes for our success. Consequently, we are subject to risks associated with rapid technological change.

Rapid technological changes in semiconductor manufacturing processes subject us to increased pressure to develop technological advances enabling such processes. We believe that our future success depends in part upon our ability to develop and offer new products with improved capabilities and to continue to enhance our existing products. If new products have reliability or quality problems, our performance could be impacted by reduced orders, higher manufacturing costs, delays in acceptance and payment for new products, and additional service and warranty expenses. We might not be able to develop and manufacture new products successfully, or new products that we introduce may fail in the marketplace. Our failure to complete commercialization of these new products in a timely manner could result in unanticipated costs and inventory obsolescence, which would adversely affect our financial results.

In order to develop new products and processes, we expect to continue to make significant investments in R&D and to pursue joint development relationships with customers, suppliers or other members of the industry. We must manage product transitions and joint development relationships successfully, as introduction of new products could adversely affect our sale of existing products.

 

16


Table of Contents

We are subject to risks associated with our competitors’ strategic relationships and their introduction of new products and we may lack the financial resources or technological capabilities of certain of our competitors needed to capture increased market share.

We expect to face significant competition from multiple current and future competitors. We believe that other companies are developing systems and products that are competitive to our products and are planning to introduce new products, which may affect our ability to sell our existing products. We face a greater risk if our competitors enter into strategic relationships with leading semiconductor manufacturers covering products similar to those we sell or may develop, as this could adversely affect our ability to sell products to those manufacturers.

We believe that to stay competitive we will require significant financial resources to offer a broad range of products, to maintain customer service and support centers worldwide, and to invest in product and process R&D. Certain of our competitors have substantially greater financial resources and more extensive engineering, manufacturing, marketing and customer service and support resources than we do and therefore have the potential to increasingly dominate the semiconductor equipment industry. These competitors may deeply discount products similar to those that we sell, challenging or even exceeding our ability to make similar accommodations and threatening our ability to sell those products. As a result, we may fail to continue to compete successfully worldwide.

In addition, our competitors may provide innovative technology that may have performance advantages over systems we currently offer or may offer in the future. They may be able to develop products comparable or superior to those that we offer or may adapt more quickly to new technologies or evolving customer requirements. In particular, while we currently are developing additional product enhancements that we believe will address future customer requirements, we may fail in a timely manner to complete the development or introduction of these additional product enhancements successfully, or these product enhancements may not achieve market acceptance or be competitive. Accordingly, we may be unable to continue to compete in our markets and competition may intensify, or future competition, operating results, financial condition, and/or cash flows could suffer.

If we are unable to adjust the scale of our business in response to rapid changes in demand in the semiconductor equipment industry, our operating results and our ability to compete successfully may be impaired.

The business cycle in the semiconductor equipment industry has historically been characterized by frequent periods of rapid change in demand that challenge our management to adjust spending and resources allocated to operating activities. During periods of growth or decline in demand for our products and services, we face significant challenges in maintaining adequate financial and business controls, management processes, information systems and procedures and in training, managing, and appropriately sizing our supply chain, our work force, and other components of our business on a timely basis. Our success will depend, to a significant extent, on the ability of our executive officers and other members of our senior management to identify and respond to these challenges, our gross margins and earnings may be impaired during periods of demand decline, and we may lack the infrastructure and resources to scale up our business to meet customer expectations and compete successfully during periods of demand growth.

If we choose to acquire new and complementary businesses, products or technologies instead of developing them ourselves, we may be unable to complete these acquisitions or may not be able to successfully integrate an acquired business in a cost-effective and non-disruptive manner.

Our success depends on our ability to continually enhance and broaden our product offerings in response to changing technologies, customer demands and competitive pressures. To achieve this, from time to time we have acquired complementary businesses, products, or technologies instead of developing them ourselves and may choose to do so in the future. On June 17, 2009, we entered into a strategic partnership with Zygo under an exclusive OEM supply agreement to provide interferometer sensors to Nanometrics for incorporation into the Unifire™ line of products as well as Nanometrics’ family of automated metrology systems. In May 2008, we acquired Tevet Process Control Technologies, Ltd., an integrated metrology company serving the worldwide semiconductor and solar manufacturing industry.

 

17


Table of Contents

We do not know if we will be able to complete any additional acquisitions, or whether we will be able to successfully integrate any acquired business, operate them profitably or retain their key employees. Integrating any business, product or technology that we acquire could be expensive and time consuming, disrupt our ongoing business and distract our management. In addition, in order to finance any acquisitions, we may be required to raise additional funds through public or private equity or debt financings. In that event, we could be forced to obtain financing on terms that are not favorable to us and, in the case of equity or convertible debt financing, which may result in dilution to our stockholders. If we are unable to integrate any acquired entities, products or technologies effectively, our business will suffer.

We manufacture all of our systems at a limited number of facilities, and any prolonged disruption in the operations of those facilities could reduce our revenues.

We produce all of our systems in our manufacturing facilities located in Milpitas, California. We use contract manufacturers in China, Israel, Japan and the United States. In addition, we perform limited subassembly for certain products at our York, England facility. Our manufacturing processes are highly complex and require sophisticated, costly equipment and specially designed facilities. As a result, any prolonged disruption in the operations of our manufacturing facilities, such as those resulting from acts of war, terrorism, political instability, health epidemics, fire, earthquake, flooding or other natural disaster could seriously harm our ability to satisfy our customer order deadlines.

Our results of operations could vary as a result of the methods, estimates and judgments we use in applying our accounting policies.

The methods, estimates and judgments we use in applying our accounting policies have a significant impact on our results of operations, see “Significant Accounting Policies” in Part II, Item 8, Note 1. Such methods, estimates and judgments are, by their nature, subject to substantial risks, uncertainties and assumptions, and factors may arise over time that leads us to change our methods, estimates and judgments. Changes in those methods, estimates and judgments could significantly affect our results of operations. In particular, our operating results have been affected by the calculation of share-based compensation expense and by the testing and potential impairment of long-lived assets such as goodwill and other intangible assets. The process of evaluating potential impairments is highly subjective and requires significant judgment, and our results of operations could vary significantly from estimates.

Our operating results have varied in the past and probably will continue to vary significantly in the future, which will cause volatility in our stock price.

Our quarterly and annual operating results have varied significantly in the past and are likely to vary in the future, which volatility could cause our stock price to decline. Some of the factors that may influence our operating results and subject our stock to extreme price and volume fluctuations include:

 

   

changes in customer demand for our systems;

 

   

economic conditions in the semiconductor industries;

 

   

the timing, cancellation or delay of customer orders and shipments;

 

   

market acceptance of our products and our customers’ products;

 

   

our ability to recover the higher costs associated with meeting our customers’ increasing service demands;

 

   

competitive pressures on product prices and changes in pricing by our customers or suppliers;

 

   

the timing of new product announcements and product releases by us or our competitors and our ability to design, introduce and manufacture new products on a timely and cost-effective basis;

 

   

the occurrence of potential impairments of long-lived assets;

 

   

the timing of acquisitions of businesses, products or technologies;

 

   

the levels of our fixed expenses, relative to our revenue levels; and

 

   

fluctuations in foreign currency exchange rates, particularly the Japanese yen and the British pound sterling.

If our operating results in any period fall below the expectations of securities analysts and investors, the market price of our common stock would likely decline.

 

18


Table of Contents

We incur significant costs as a result of complying with laws and regulations affecting public companies.

Compliance with laws and regulations affecting public companies, including the provisions of the Sarbanes-Oxley Act of 2002, has resulted in and, we expect, will continue to result in substantial accounting, legal and administrative costs. In particular, Section 404 of the Sarbanes-Oxley Act of 2002 and the rules of the SEC and the Public Company Accounting Oversight Board impose requirements with respect to the evaluation of the effectiveness of our internal controls. The cost of complying with these requirements is substantial.

We are highly dependent on international sales and operations, which exposes us to foreign political and economic risks.

We maintain facilities in Japan, Taiwan, the United Kingdom, South Korea, China, Israel, Singapore and the European Union. We anticipate that international sales will continue to account for a significant portion of our revenues. International sales and operations carry inherent risks such as:

 

   

regulatory limitations imposed by foreign governments;

 

   

obstacles to the protection of our intellectual property, political, military and terrorism risks;

 

   

disruptions or delays in shipments caused by customs brokers or other government agencies;

 

   

unexpected changes in regulatory requirements, tariffs, customs, duties and other trade barriers;

 

   

difficulties in staffing and managing foreign operations; and

 

   

potentially adverse tax consequences resulting from changes in tax laws.

If any of these risks materialize and we are unable to manage them, our international sales and operations would suffer.

We are exposed to fluctuations in the exchange rates of foreign currency.

As a global concern, we face exposure to adverse movements in foreign currency exchange rates. With our operations in Japan, South Korea, the United Kingdom, the European Union, Taiwan, China, Singapore and Israel, a significant percentage of our cash flows are exposed to foreign currency risk. In 2010, 2009 and 2008, 65.4%, 70.3% and 70.5%, respectively, of our total net revenues were derived from sales to customers in foreign countries, including certain countries in Asia, such as Japan, South Korea and Singapore. These exposures may change over time as business practices evolve and could have a material adverse impact on our financial results and cash flow.

We are subject to various environmental laws and regulations that could impose substantial costs upon us and may harm our business, operating results and financial condition.

Some of our operations use substances regulated under various federal, state, local, and international laws governing the environment, including those relating to the storage, use, discharge, disposal, labeling, and human exposure to hazardous and toxic materials. We could incur costs, fines and civil or criminal sanctions, third-party property damage or personal injury claims, or could be required to incur substantial investigation or remediation costs, if we were to violate or become liable under environmental laws. Liability under environmental laws can be joint and several and without regard to comparative fault. Compliance with current or future environmental laws and regulations could restrict our ability to expand our facilities or require us to acquire additional expensive equipment, modify our manufacturing processes, or incur other significant expenses. We may unintentionally violate environmental laws or regulations in the future as a result of human error, equipment failure or other causes.

Anti-takeover provisions in our charter documents and Delaware law could discourage, delay or prevent a change in control of our company and may affect the trading price of our common stock.

The anti-takeover provisions of the Delaware General Corporation Law may discourage, delay or prevent a change in control by limiting our ability to engage in a business combination with an interested stockholder for a period of three years after the person becomes an interested stockholder, even if a change of control would be beneficial to our existing stockholders. In addition, our certificate of incorporation and bylaws may discourage, delay or prevent a change in our management or control over us that stockholders may consider favorable. Our certificate of incorporation and bylaws:

 

   

authorize the issuance of “blank check” preferred stock that could be issued by our board of directors to thwart a takeover attempt;

 

19


Table of Contents
   

establish a classified board of directors, as a result of which it will be more difficult for our stockholders to change the composition of our board of directors in a relatively short period of time;

 

   

limit who may call special meetings of stockholders; and

 

   

prohibit stockholder action by written consent, requiring all actions to be taken at a meeting of the stockholders.

We may experience periodic or prolonged disruption of our IT infrastructure, which may adversely affect our operations.

We rely on our Enterprise Resource Planning (“ERP”) system,SYSPRO, to manage our business and accurately and timely report key data with respect to our results of operations, financial position and cash flows. We may experience periodic or prolonged disruption of our IT infrastructure arising out of general use of such systems, periodic upgrades and updates, or external factors that are outside of our control. Any such disruption could adversely affect our ability to complete essential business processes, including our evaluation of our internal control over financial reporting pursuant to Section 404 of the Sarbanes-Oxley Act of 2002. If we encounter unforeseen problems with regard to our ERP system or other IT systems, our business, operations and financial condition could be adversely affected.

 

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

 

ITEM 2. PROPERTIES

At January 1, 2011, our owned or leased facilities included those described below:

 

Type

  

Location

   Square
Footage
    

Use

Owned

   Milpitas, California      133,000       Corporate headquarters and manufacturing

Owned

   Milpitas, California      3,038       Corporate housing

Leased

   San Jose, California      850       Corporate housing

Leased

   York, England      20,338       Sales, service and engineering

Leased

   Hwasung-City, South Korea      13,544       Sales and service

Leased

   Dong-Guang, Taiwan      9,430       Sales and service

Leased

   Yoqneam, Israel      8,589       Engineering and service

Leased

   Tokyo, Japan      7,500       Sales, service and corporate housing

Leased

   Hillsboro, Oregon      6,410       Engineering, sales and service

Leased

   Bend, Oregon      5,200       Engineering, sales and service

Leased

   Shanghai, China      5,045       Sales and service

Leased

   Tech Point, Singapore      4,529       Sales and service

Leased

   Austin, Texas      3,492       Engineering, sales and service

Leased

   Kumamoto, Japan      3,250       Sales, service and engineering

Leased

   Suwon City, South Korea      3,068       Sales and service

Leased

   Tainan, Taiwan      1,925       Sales and service

Leased

   WuHan, China      1,857       Sales and service

Leased

   Yokkaichi, Japan      1,750       Sales and service

Leased

   WuXi, China      1,356       Sales and service

Leased

   Da Lian, China      1,217       Sales and service

Leased

   Grenoble, France      570       Sales and service

Leased

   Zug, Switzerland      387       Sales and service

Leased

   Berlin, Germany      318       Sales and service

We believe that our existing facilities are suitable and adequate for our current needs and anticipated growth.

 

20


Table of Contents
ITEM 3. LEGAL PROCEEDINGS

In August 2005, KLA-Tencor Corporation (“KLA”) filed a complaint against the Company in the United States District Court for the Northern District of California. The complaint alleges that certain of the Company’s products infringe two of KLA’s patents. On January 30, 2006, KLA added a third patent to its complaint. The complaint seeks a preliminary and permanent injunction against the sale of these products as well as the recovery of monetary damages and attorneys’ fees. As part of its defense, the Company has filed requests for re-examinations of the allegedly infringed KLA patents with the U.S. Patent & Trademark Office (“PTO”). That is, the Company has requested that the PTO review the KLA patents to determine whether or not the patents should remain enforceable as written.

In March 2006, the Court stayed the patent litigation case until the re-examinations are completed. On November 4, 2008, the PTO issued an Ex Parte Reexamination Certificate (indicating completion of the reexamination process) on one of the three patents-in-suit. On December 8, 2009, the PTO issued an Ex Parte Reexamination Certificate for another of the KLA patents-in-suit. On September 21, 2009, while the reexamination of the third patent-in-suit was still pending, the Company filed a second request for re-examination relating to the third patent. On March 30, 2010, the PTO issued an Ex Parte Reexamination Certificate as to the first reexamination of the third patent. The second reexamination of the third patent remains pending, and the litigation remains stayed. In all four of the reexamination proceedings, the PTO has issued Office Actions rejecting numerous claims of KLA’s patents and KLA has amended the claims in response. We believe, we have meritorious defenses to the claims and plan to vigorously defend these lawsuits.

 

ITEM 4. REMOVED AND RESERVED

PART II

 

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Information for Common Stock

Our common stock is quoted on the NASDAQ Global Market under the symbol “NANO.” The following table sets forth, for the periods indicated, the high and low bid prices per share of our common stock as reported on the NASDAQ Global Market. These quotations represent prices between dealers and do not include retail markups, markdowns or commissions and may not necessarily represent actual transactions.

 

2010

       High              Low      

First quarter

   $ 13.42       $ 7.98   

Second quarter

   $ 12.25       $ 6.60   

Third quarter

   $ 15.74       $ 8.00   

Fourth quarter

   $ 15.80       $ 10.92   

2009

   High      Low  

First quarter

   $ 1.64       $ 1.08   

Second quarter

   $ 2.50       $ 1.11   

Third quarter

   $ 8.70       $ 2.56   

Fourth quarter

   $ 13.27       $ 6.08   

 

21


Table of Contents

Stockholders

On March 4, 2011, there were approximately 251 holders of record of our common stock. Because brokers and the institutions on behalf of stockholders hold many of our shares of common stock, we are unable to estimate the total number of stockholders represented by these record holders.

Dividend Policy

We have never declared or paid any cash dividends on our capital stock. We currently expect to retain future earnings, if any, for use in the operation and expansion of our business and do not anticipate paying any cash dividends in the foreseeable future.

Equity Compensation Plan Information

The following table gives information about the common stock that may be issued under all of our existing equity compensation plans as of January 1, 2011.

 

 

Plan category

   Number of securities to be
issued upon exercise of
outstanding options,
warrants and rights
     Weighted-average
exercise price of
outstanding options,
warrants and rights
     Number of securities  remaining
available for future issuance
under equity compensation
plans (excluding securities
reflected in first column)
 

Equity compensation plans approved by security holders

     2,695,255       $ 7.39         738,884   

Equity compensation plans not approved by security holders(1)

     68,431       $ 9.09         283,324   
                    

Total

     2,763,686       $ 7.43         1,022,208   
                    

 

(1) The material features of the 2002 Non-statutory Stock Plan, which was adopted without the approval of security holders, is set forth in Note 14 to the consolidated financial statements.

Stock Performance Graph

The following graph presentation compares cumulative five-year stockholder returns on an indexed basis, assuming a $100 initial investment and reinvestment of dividends, of (a) Nanometrics Incorporated, (b) a broad-based equity market index and (c) an industry-specific index. The broad-based equity market index used is the NASDAQ Composite Index and the industry-specific index used is the RDG Technology Composite Index.

This performance graph shall not be deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, as amended or otherwise subject to the liabilities under that Section, and shall not be deemed to be incorporated by reference into any of our filings under the Securities Act of 1933, as amended or the Exchange Act.

 

22


Table of Contents

COMPARSON OF 5 YEAR CUMULATIVE TOTAL RETURN

Among Nanometrics Incorporated, the NASDAQ Composite Index

and the RDG Technology Composite Index

LOGO

 

* $100 invested on 12/31/05 in stock or index, including reinvestment of dividends. Fiscal year ending December 31.

Recent Sales of Unregistered Securities

None.

 

23


Table of Contents

Issuer Purchases of Equity Securities

Pursuant to repurchase programs approved by the Board of Directors, the Company repurchased its common stock as follows (in thousands, except shares and per share data):

 

Plan   Period  

Number of

shares

repurchased

 

Average price

paid per share

 

Total shares

repurchased

under the plan

 

Amount

remaining for

repurchase

July 2007

  August 2010   96,492   $            13.68   734,999   —  

November 2010

  December 2010   65,000   $            11.96   65,000   $ 9,223

On July 26, 2007, our Board of Directors approved the repurchase shares of our common stock up to $4.0 million. During the fiscal year 2010, we repurchased and retired 96,492 shares of our common stock under this program for an aggregate consideration of $1.3 million. As of January 1, 2011 the entire $4.0 million approved by the Board for the repurchase of our shares of common stock had been used for the purpose.

On November 29, 2010, the Board of Directors approved another program to repurchase up to $10.0 million of the Company’s common stock. Share repurchases under this program may be made through open market and privately negotiated transactions, at times and in such amounts as management deems appropriate. The timing and actual number of shares repurchased is dependent on a variety of factors including price, corporate and regulatory requirements and other market conditions. During the fiscal year 2010, we repurchased and retired 65,000 shares of our common stock under this program for an aggregate consideration of $0.8 million. As of January 1, 2011 there remained $9.2 million available for the future repurchase of shares of our common stock.

 

24


Table of Contents
ITEM 6. SELECTED FINANCIAL DATA

The selected consolidated financial data set forth below should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the consolidated financial statements and related notes included elsewhere in this Form 10-K.

 

     Fiscal Year  
     2010     2009(a)     2008     2007     2006  
     (in thousands, except per share data)  

Consolidated Statement of Operations Data:

          

Net revenues:

          

Products

   $ 154,548      $ 49,153      $ 75,596      $ 126,049      $ 80,636   

Service

     33,517        27,554        26,505        20,241        15,738   
                                        

Total net revenues

     188,065        76,707        102,101        146,290        96,374   
                                        

Costs of revenues:

          

Cost of products

     66,484        26,594        38,692        63,938        44,016   

Cost of service

     19,328        13,992        18,675        20,717        16,610   
                                        

Total cost of net revenues

     85,812        40,586        57,367        84,655        60,626   
                                        

Gross profit

     102,253        36,121        44,734        61,635        35,748   

Operating expenses:

          

Research and development

     18,973        14,672        17,110        18,577        14,253   

Selling

     21,320        15,072        17,798        19,561        16,977   

General and administrative

     18,617        15,168        19,689        21,704        21,305   

Amortization of intangible assets

     1,556        1,535        3,531        5,782        5,338   

Restructuring charge

     —          1,134        1,525        2,128        —     

Gain on sale of assets

     —          —          —          (2,100     —     

Asset impairment and disposition

     463        1,899        68,545        —          —     
                                        

Total operating expenses

     60,929        49,480        128,198        65,652        57,873   

Income (loss) from operations

     41,324        (13,359     (83,464     (4,017     (22,125

Other (expense) income, net

     (635     (3,532     1,174        (22     (325

Provision (benefit) for income taxes

     (15,259     (586     436        (31     (323
                                        

Net income (loss)

   $ 55,948      $ (16,305   $ (82,726   $ (4,008   $ (22,127
                                        

Basic net income (loss) per share

   $ 2.56      $ (0.87   $ (4.46   $ (0.22   $ (1.47
                                        

Diluted net income (loss) per share

   $ 2.43      $ (0.87   $ (4.46   $ (0.22   $ (1.47
                                        

Shares used in per share computation:

          

Basic

     21,855        18,639        18,546        18,099        15,075   
                                        

Diluted

     22,998        18,639        18,546        18,099        15,075   
                                        

 

(a) The fiscal year ended January 2, 2010 included 53 weeks, whereas the other periods presented included 52 weeks.

 

     Fiscal Year End  
     2010      2009      2008      2007      2006  
     (in thousands)  

Consolidated Balance Sheet Data:

              

Cash, cash equivalents and short-term investments

   $ 66,460       $ 43,526       $ 23,980       $ 14,919       $ 7,957   

Working capital

     135,770         76,771         57,901         57,062         49,721   

Total assets

     220,025         147,470         123,854         207,076         212,376   

Long-term liabilities including current portion of debt obligation

     17,142         15,963         14,302         1,942         3,655   

Total stockholders’ equity

     170,849         106,754         92,767         175,844         174,631   

 

25


Table of Contents
ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Overview

You should read the following discussion and analysis of our financial condition and results of operations together with “Selected Financial Data” and our consolidated financial statements and related notes appearing elsewhere in this Annual Report on Form 10-K. This discussion and analysis contains forward-looking statements that involve risks, uncertainties and assumptions. The actual results may differ materially from those anticipated in these forward-looking statements as a result of certain factors, including, but not limited to, those presented under “Risk Factors” in Item 1A and elsewhere in this Annual Report on Form 10-K.

We are an innovator in the field of metrology systems for the semiconductor manufacturing and other industries. Our systems are designed to precisely monitor film thickness and critical dimensions that are necessary to control the manufacturing process and provide increased production yields and performance.

Capital expenditures by manufacturers of semiconductors, especially in Asia, are critical to our success. Purchases of our systems by these manufacturers are driven by the expected market demand for their new products and new applications. The increasing complexity of the manufacturing processes for semiconductors is an important factor in the demand for our innovative metrology systems, as are the adoption of optical critical dimension (“OCD”) metrology across fabrication processes, adoption of immersion lithography and double patterning, adoption of new types of thin film materials and the need for improved process control to drive process efficiencies. Our strategy is to continue to innovate organically as well to evaluate strategic acquisitions in order to address business challenges and opportunities.

Our revenues are primarily derived from product sales but are also derived from customer service and system upgrades for the installed base of our products. In 2010, we derived 82.2% of our total net revenues from product sales and 17.8% of our total net revenues from services.

Important Themes and Significant Trends

The semiconductor equipment industry is characterized by cyclical growth. Changing trends in the semiconductor industry continue to drive the need for metrology as a major component of manufacturing systems. These trends include:

 

   

Proliferation of Optical Critical Dimension Metrology across Fabrication Processes. Our customers use photolithographic processes to create patterns on wafers. Critical dimensions must be carefully controlled during this process. In advanced node device definition, additional monitoring of thickness and profile dimensions on these patterned structures at CMP, Etch, and Thin Film processing is driving broader OCD adoption. Our proprietary OCD systems can provide the critical process control of these circuit dimensions that is necessary for successful manufacturing of these state of the art devices. Nanometrics OCD technology is broadly adopted across NAND, DRAM, HDD, and logic manufacturing processes.

 

   

Adoption of Advanced Packaging Processes: Our customers use photolithographic, etching, metallization, and wafer thinning to enable next generation advanced packaging solutions for semiconductor devices. The new packages lead to increased functionality in smaller, less expensive form factors. The advanced packages can be broken down into high density flip chip or bump packages that increase pin density allowing for more complex I/O on advanced CPU parts. Additionally, similar or different devices can be stacked at the wafer level using a Through Silicon Via process. The TSV process enables high density small form factor parts, being primarily driven by mobile consumer products (i.e. cellular telephones with integrated CMOS camera sensors). Increasingly advanced packaging technologies are being adopted by our end customers.

 

26


Table of Contents
   

Adoption of New Types of Thin Film Materials. The need for ever increasing device circuit speed coupled with lower power consumption has pushed semiconductor device manufacturers to begin the replacement of the traditional aluminum etch back interconnect flows as well as conventional gate dielectric materials, all which drive a broader adoption of thin film and OCD metrology systems. To achieve greater semiconductor device speed, manufacturers have adopted copper in Logic/IDM and it is now proliferating in next generation DRAM and Flash nodes. Additionally, to achieve improved transistor performance in logic devices and higher cell densities in memory devices, new materials including high dielectric constant (or high-k) gate materials are increasingly being substituted for traditional silicon-oxide gate dielectric materials. High-k materials are comprised of complex thin films including layers of hafnium oxide and a bi-layer of thin film metals. Our advanced metrology solutions are required for thickness control of these layers, which is critical to enable the device performance improvements that these new materials allow.

 

   

Development of 3D Transistor Architectures. Our end customers continue to improve device density and performance by scaling front end of line transistor architectures. Many of these designs have buried features and high aspect ratio stacked features that enable improved performance and density. The advanced designs require additional process control to manage the complex shapes and materials properties, driving additional applications for both OCD and UniFire systems.

 

   

Need for Improved Process Control to Drive Process Efficiencies. Competitive forces influencing semiconductor device manufacturers, such as price-cutting and shorter product life cycles, place pressure on manufacturers to rapidly achieve production efficiency. Device manufacturers are using our integrated and automated metrology systems throughout the fabrication to ensure that manufacturing processes scale rapidly, are accurate and can be repeated on a consistent basis.

 

   

Reduced Number of Customers. Because of the escalating cost of 300mm manufacturing facilities, fewer semiconductor manufacturers can afford the significant investment in these next generation facilities. Therefore, fewer opportunities for semiconductors equipment companies exist. Given that the available number of potential customers is decreasing, pre-existing customer relationships, product positioning and critical mass take on greater importance.

Critical Accounting Policies

The preparation of our financial statements conforms to accounting principles generally accepted in the United States of America, which requires management to make estimates and judgments in applying our accounting policies that have an important impact on our reported amounts of assets, liabilities, revenue, expenses and related disclosures at the date of our financial statements. On an on-going basis, management evaluates its estimates including those related to bad debts, inventory valuations, warranty obligations, impairment and income taxes. Management bases its estimates and judgments on historical experience and on various other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from management’s estimates. We believe that the application of the following accounting policies requires significant judgments and estimates on the part of management. For a summary of all of our accounting policies, including those discussed below, see Note 1 to the Consolidated Financial Statements.

Revenue Recognition – We recognize revenue when persuasive evidence of an arrangement exists, delivery has occurred or services have been rendered, the seller’s price is fixed or determinable, and collectability is reasonably assured. We derive revenue from the sale of process control metrology systems (“Product revenue”) as well as spare part sales, billable service, service contracts, and upgrades (together “Service revenue”). Upgrades are a group of parts that change the existing configuration of a product, and are included in Service revenue. They are distinguished from Product revenue, which consist of complete, automated process control metrology systems (the ‘system(s)’). Nanometrics’ systems consist of hardware and of software which is incidental to the systems. Arrangements for sales of systems often include defined customer-specified acceptance criteria.

 

27


Table of Contents

For product sales to existing customers, revenue recognition occurs at the time title and risk of loss transfer, which usually occurs upon shipment from our manufacturing location, if it can be reliably demonstrated that the product has successfully met the defined customer specified acceptance criteria, and all other recognition criteria has been met. This occurs at the time of shipment as the terms are FOB shipping point. For initial sales of product where we have not previously met the defined customer specified acceptance criteria, product revenues are recognized upon the earlier of receipt of written customer acceptance or expiration of the contractual acceptance period. In Japan, where contractual terms with the customer specify risk of loss and title transfers upon customer acceptance, revenue is recognized upon receipt of written customer acceptance, provided that all other recognition criteria have been met. Upon recognition of product revenue, a liability is recorded for anticipated warranty costs.

As part of customer service, we also sell software that is considered to be an upgrade to the customer’s existing system. Such software is specific to the type of tool being upgraded and cannot be used in other tools. Software is not a significant focus of our product offerings and marketing efforts, and we do not provide post-sale customer service with respect to the software that we sell. Revenue on software upgrades is recognized when the software is delivered to the customer, provided that all other recognition criteria have been met.

All of our products are assembled prior to shipment to customers. We often perform installation for our customers; however such an installation is inconsequential and perfuntctory, and could be provided by outside third parties and is not considered essential to the functionality of the equipment.

Revenue related to spare part sales is recognized upon shipment. Revenue related to billable service is recognized as the services are performed, and, if billable service and spare parts are sold together, revenue is recognized when the parts are delivered and the service is complete. Service contracts may be purchased by the customer during or after the warranty period and revenue is recognized ratably over the service contract period. Revenue on upgrades (including software upgrades) is recognized when the upgrade has been delivered to the customer. For initial upgrade sales where we have not previously met the defined customer specified acceptance criteria, if any, revenue is recognized upon earlier of receipt of written customer acceptance or the expiration of the contractual acceptance period. On occasion, customers request a warranty period longer than our standard 12 month warranty, in those instances, the associated revenue is deferred and recognized as service revenue ratably over the term of the contract. The portion of service contracts and extended warranty services agreements that are uncompleted at the end of any reporting period are included in deferred revenue. We generally do not provide customers with any return rights.

In cases where we can ascertain the fair value of all the elements, and certain elements of a sales arrangement are not delivered and accepted at the same time, the relative fair value of the undelivered element is deferred until that element is delivered and accepted by the customer. In multiple-element arrangements where we only have fair value of the undelivered elements, the residual method is applied. In order to recognize revenue associated with delivered elements, the following criteria must be met: (a) the delivered item(s) has value to the customer on a standalone basis; (b) there is objective and reliable evidence of the fair value of the undelivered item(s); and (c) delivery or performance of the undelivered item(s) is considered probable and is substantially in our control. If the arrangement does not meet all the above criteria, the entire amount of the sales contract is deferred until the above criteria have been met or all elements have been delivered to the customer. Objective and reliable evidence of the fair value of an element is based on the amounts for which we sell equivalent products or services on a standalone basis.

Allowance for Doubtful Accounts – We maintain allowances for estimated losses resulting from the inability of our customers to make their required payments. Credit limits are established through a process of reviewing the financial history and stability of our customers. Where appropriate and available, we obtain credit rating reports and financial statements of customers when determining or modifying their credit limits. We regularly evaluate the collectability of our trade receivable balances based on a combination of factors such as the length of time the receivables are past due, customary payment practices in the respective geographies and our historical collection experience with customers. We believe that our allowance for doubtful accounts adequately reflects our risk associated with our receivables. If however, the financial conditions of customers were to deteriorate, resulting in their inability to make payments, we would assess the necessity of recording additional allowances. This would result in additional general and administrative expenses being recorded for the period in which such determination was made.

 

28


Table of Contents

Inventories – Inventories are stated at the lower of standard cost (which approximates actual cost on a first-in, first-out basis), or market. We are exposed to a number of economic and industry-specific factors that could result in portions of our inventory becoming either obsolete or in excess of anticipated usage, or saleable only for amounts that are less than their carrying amounts. These factors include, but are not limited to, technological changes in our market, our ability to meet changing customer requirements, competitive pressures in products and prices, and the availability of key components from our suppliers. We have established inventory reserves when conditions exist that suggest that our inventory may be in excess of anticipated demand or is obsolete based upon our assumptions about future demand for our products and market conditions. Once a reserve has been established, it is maintained until the part to which it relates is sold or is otherwise disposed off. We regularly evaluate our ability to realize the value of our inventory based on a combination of factors including the following: historical usage rates, forecasted sales of usage, product end-of-life dates, estimated current and future market values and new product introductions. For demonstration inventory, we also consider the age of the inventory and potential cost to refurbish the inventory prior to sale. Demonstration inventory is amortized over its useful life and the amortization expense is included in total depreciation and amortization on our cash flow statement. When recorded, our reserves are intended to reduce the carrying value of our inventory to its net realizable value. If actual demand for our products deteriorates, or market conditions are less favorable than those that we project, additional reserves may be required.

Product Warranties – We sell the majority of our products with a standard twelve (12)-month repair or replacement warranty from the date of acceptance or shipment date. We provide an accrual for estimated future warranty costs based upon the historical relationship of warranty costs to the cost of products sold. The estimated future warranty obligations related to product sales are reported in the period in which the related revenue is recognized. The estimated future warranty obligations are affected by the warranty periods, sales volumes, product failure rates, material usage and labor and replacement costs incurred in correcting a product failure. If actual product failure rates, material usage, labor or replacement costs differ from our estimates, revisions to the estimated warranty obligations would be required. For new product introductions where limited or no historical information exists, we may use warranty information from other previous product introductions to guide us in estimating our warranty accrual. The warranty accrual represents the best estimate of the amount necessary to settle future and existing claims on products sold as of the balance sheet date. We periodically assess the adequacy of our recorded warranty reserve and adjust the amounts in accordance with changes in these factors.

Goodwill and Intangible Assets – Intangible assets with finite lives are amortized over their useful lives while goodwill and indefinite lived assets are not amortized but tested annually for impairment. Our impairment review process is completed as of the last day of November of each year or whenever events or circumstances occur which indicate that an impairment may have occurred. The relevant accounting standard provides for a two-step approach to determining whether and how much goodwill has been impaired. The first step requires a comparison of the fair value of Nanometrics’ reporting units to its net book value. If the fair value is greater, then no impairment is deemed to have occurred. If the fair value is less, then the second step must be performed to determine the amount, if any, of actual impairment.

The process of evaluating the potential impairment of goodwill is highly subjective and requires significant judgment. In estimating the fair value of goodwill for the Company’s reporting units, we make estimates and judgments about future revenues and cash flows for each reporting unit. To determine the fair value, our review process includes the income method and is based on a discounted future cash flow approach that uses estimates including the following for each reporting unit: revenue, based on assumed market growth rates and our assumed market share; estimated costs; and appropriate discount rates based on the particular reporting unit’s weighted average cost of capital. Our estimates of market segment growth, our market segment share and costs are based on historical data, various internal estimates and certain external sources, and are based on assumptions that are consistent with the plans and estimates we are using to manage the underlying businesses. Our business consists of both established and emerging technologies and our forecasts for emerging technologies are based upon internal estimates and external sources rather than historical information. We also consider our market capitalization on the dates of our impairment tests in determining the fair value of the respective businesses. As part of the second step in determining the amount of goodwill impairment, if any, we allocate the fair value of the reporting units to all of their assets and liabilities as if the reporting units had been acquired in a business combination and the fair value of the reporting units was the price paid to acquire the reporting unit. The excess of the fair value of each reporting unit over the amount assigned to its assets and liabilities is the implied fair value of goodwill. When impairment is deemed to have occurred, we will recognize an impairment charge to reduce the carrying amount of our goodwill to its implied fair value, and in the fiscal year 2008 we wrote off the entire $54.0 million of our goodwill. There was no goodwill at the end of fiscal years 2010 and 2009.

 

29


Table of Contents

Income Tax Assets and Liabilities – We account for income taxes such that deferred tax assets and liabilities are recognized using enacted tax rates for the effect of temporary differences between the book and tax accounting for assets and liabilities. Also, deferred tax assets are reduced by a valuation allowance if it is more likely than not that a portion of the deferred tax asset will not be realized in the future. We evaluate the deferred tax assets on a periodic basis to determine whether or not a valuation allowance is appropriate. Factors used in this determination include future expected income and the underlying asset or liability which generated the temporary tax difference. Our income tax provision is primarily impacted by federal statutory rates, state and foreign income taxes and changes in our valuation allowance.

Stock-Based Compensation –We estimate the value of employee stock options on the date of grant using the Black-Scholes model. The determination of fair value of share-based payment awards on the date of grant using an option-pricing model is affected by our stock price as well as assumptions regarding a number of highly complex and subjective variables. These variables include, but are not limited to the expected stock price volatility over the term of the awards, and actual and projected employee stock option exercise behaviors. The expected term of options granted is calculated based on the simplified method. The expected volatility is based on the historical volatility of our stock price.

Restructuring Charges – There was no restructuring or related charges during the fiscal year 2010. During the fiscal years 2009 and 2008, we implemented restructuring programs based on our business strategy and recorded significant accruals in connection with the restructuring program. In connection with the plan we have recorded estimated expenses for severance and other costs. Costs associated with restructuring activities are recognized when they are incurred rather than the date of a commitment to an exit or disposal plan in accordance with ASC 420. A liability for post-employment benefits is incurred when payment is probable, the amount is reasonably estimable, and the obligation relates to rights that have vested or accumulated. Given the significance and complexity of restructuring activities, and the timing of the execution of such activities, the restructuring process involves periodic reassessments of the estimates made at the time the original decisions were made, including evaluating market conditions for expected disposals of assets and vacancy of space.

Recent Accounting Pronouncements

See Note 1 of the Consolidated Financial Statements for a description of recent accounting pronouncements, including the respective dates of adoption and effects on our results of operations and financial condition.

 

30


Table of Contents

Results of Operations

The following table presents our consolidated statements of operations data as a percentage of total net revenues for fiscal years ended January 1, 2011, January 2, 2010 and December 27, 2008.

 

     Fiscal Year  
     2010     2009     2008  

Net revenues:

      

Products

     82.2     64.1     74.0

Service

     17.8        35.9        26.0   
                        

Total net revenues

     100.0        100.0        100.0   
                        

Costs of net revenues:

      

Cost of products

     35.3        34.7        37.9   

Cost of service

     10.3        18.2        18.3   
                        

Total costs of net revenues

     45.6        52.9        56.2   
                        

Gross profit

     54.4        47.1        43.8   

Operating expenses:

      

Research and development

     10.1        19.1        16.8   

Selling

     11.3        19.6        17.4   

General and administrative

     9.9        19.8        19.3   

Amortization of intangibles

     0.8        2.0        3.5   

Restructuring charge

     —          1.5        1.5   

Asset impairment

     0.3        2.5        67.1   
                        

Total operating expenses

     32.4        64.5        125.6   
                        

Income (loss) from operations

     22.0        (17.4     (81.8
                        

Other income (expense):

      

Interest income

     0.1        0.1        0.2   

Interest expense

     (0.8     (2.2     (0.6

Other, net

     0.3        (2.5     1.6   
                        

Total other income (expense), net

     (0.4     (4.6     1.2   
                        

Income (loss) before income taxes

     21.6        (22.0     (80.6

Provision (benefit) for income taxes

     (8.1     (0.7     0.4   
                        

Net income (loss)

     29.7     (21.3 )%      (81.0 )% 
                        

Fiscal years 2010, 2009 and 2008 (ended January 1, 2011, January 2, 2010, and December 27, 2008, respectively)

Total net revenues. Our net revenues were comprised of the following product lines (in thousands, except percent):

 

     Fiscal Year                
     2010      2009      Change  

Automated systems

   $ 110,955       $ 36,554       $ 74,401         203.5

Integrated systems

     17,437         2,767         14,670         530.2

Materials characterization

     26,156         9,832         16,324         166.0
                             

Total product revenue

     154,548         49,153         105,395         214.4

Service

     33,517         27,554         5,963         21.6
                             

Total net revenues

   $ 188,065       $ 76,707       $ 111,358         145.2
                             

 

31


Table of Contents
     Fiscal Year               
     2009      2008      Change  

Automated systems

   $ 36,554       $ 40,623       $ (4,069     (10.0 )% 

Integrated systems

     2,767         15,964         (13,197     (82.7 )% 

Materials characterization

     9,832         19,009         (9,177     (48.3 )% 
                            

Total product revenue

     49,153         75,596         (26,443     (35.0 )% 

Service

     27,554         26,505         1,049        4.0
                            

Total net revenues

   $ 76,707       $ 102,101       $ (25,394     (24.9 )% 
                            

In 2010 the revenue from products increased by $105.4 million over the previous year, most of it attributable to increased capital spending by our customers as the global economy started to turn around. About $74.4 million of this increase was attributable to Automated Systems (Atlas®, NanoGen®, Caliper Mosaic™, Lynx™ and Lithos), Materials Characterization tools accounted for $16.3 million of this increase and $14.7 million increase in the integrated metrology systems. Service revenue increased by $6.0 million in fiscal year 2010, compared to fiscal year 2009, a significant portion of this increase was due to increased parts sales of $4.4 million.

In 2009, net revenues from automated systems decreased by $4.1 million compared to the comparable period in 2008, which decreases were primarily the result of a global reduction in capital spending by semiconductor manufacturers, though in the third and fourth quarters of 2009, we experienced an increase in revenues in automated metrology, in part due to increases in multi-system orders and technology upgrades in both the memory and logic sections, strong sales of our thin-film and OCD systems, increasing demand for our Caliper Mosaic™ overlay product, and further penetration into high-growth segments such as high-brightness LEDs. In 2009, integrated systems decreased by $13.2 million when compared to 2008 due primarily to reduced market demand. Sales of our integrated systems are highly dependent on, and driven by, manufacturing companies expanding their capacity. Given the global economic conditions, manufacturing companies were not expanding their capacity; and therefore, sales of our systems to these companies declined. Service revenue improved by $1.0 million over the comparable period in 2008, primarily due to higher in-the-field tool upgrades.

Gross margins. Our gross margin breakdown was as follows:

 

     Fiscal Year  
     2010     2009     2008  

Products

     57.0     45.9     48.8

Service

     42.3     49.2     29.5

The margin on products increased significantly in 2010 compared to 2009, a 11.1% increase from 45.9% to 57.0%. Improved margins of 10.1% were related to higher sales volume levels, which resulted in higher favorable absorption of manufacturing costs and lower warranty expense which was partially offset by royalties. The balance of the product margin improvement of 1.0% was related to increased product margins due to a more favorable product mix of higher margin products. The margins on service revenue decreased from 49.2% in 2009 to 42.3% in 2010.This decrease was attributable to a 11.0% decline in margins on upgrades and also due to cost increases for ramping up the size of the service organization infrastructure to support higher volume of sales.

The product gross margin in 2009 compared to 2008, decreased from 48.8% to 45.9%. Reduced margins of 7.3% were related to lower absorption of manufacturing costs at lower revenue and volume level and higher warranty costs. Offsetting the unfavorable reductions in margin, was a 4.4% improvement in margin due to sales mix favoring higher margin products service gross margin improved in 2009 from 29.5% to 49.2% due to a significant increase in service upgrade revenues, which have a higher gross margin relative to our core service revenues. The continued operation of our core service department in a more efficient manner, including improvements to our job scheduling process also contributed to the improvement of our service gross margins.

 

32


Table of Contents

Operating expenses. Our operating expenses were comprised of the following categories (in thousands):

 

     Fiscal Year               
     2010      2009      Change  

Research and development

   $ 18,973       $ 14,672       $ 4,301        29.3

Selling

     21,320         15,072         6,248        41.4

General and administrative

     18,617         15,168         3,449        22.7

Amortization of intangible assets

     1,556         1,535         21        1.4
                                  

Operating expenses before restructuring or impairment

     60,466         46,447         14,019        30.2

Restructuring charge

     —           1,134         (671     (59.2 )% 

Asset impairment

     463         1,899         (1,899     (100.0 )% 
                                  

Total operating expenses

   $ 60,929       $ 49,480       $ 11,449        23.1
                            
     Fiscal Year               
     2009      2008      Change  

Research and development

   $ 14,672       $ 17,110       $ (2,438     (14.2 )% 

Selling

     15,072         17,798         (2,726     (15.3 )% 

General and administrative

     15,168         19,689         (4,521     (23.0 )% 

Amortization of intangible assets

     1,535         3,531         (1,996     (56.5 )% 
                                  

Operating expenses before restructuring or impairment

     46,447         58,128         (11,681     (20.1 )% 

Restructuring charge

     1,134         1,525         (391     (25.6 )% 

Asset impairment

     1,899         68,545         (66,646     (97.2 )% 
                                  

Total operating expenses

   $ 49,480       $ 128,198       $ (78,718     (61.4 )% 
                            

Research and development.

Research and development costs increased by $4.3 million or 29.3% in the fiscal year 2010 when compared to 2009, this increase was a result of $3.6 million increase in labor and consulting costs and $0.7 million increase in cost of facilities.

Research and development costs decreased by $2.4 million or 14.2% in fiscal year 2009 when compared to 2008, primarily due to lower labor costs of $2.1 million as a result of headcount reduction from 92 to 82, respectively, and forced time off, and a $0.4 million reduction in travel costs.

Selling.

Selling and marketing expenses increased by $6.2 million or 41.4% in fiscal year 2010, when compared to 2009. Higher costs are a result of increased labor costs of $4.8 million (including increases in salaries, bonus, commission, severance and stock based compensation) and a $1.1 million increase in travel expenses.

Selling expenses decreased by $2.7 million or 15.3% in fiscal year 2009, when compared to 2008, primarily due to lower labor costs of $1.5 million as a result of headcount reduction from 111 to 103, respectively, and forced time off in 2009, reduction in travel costs of $0.7 million, and lower trade show expenses of $0.2 million.

General and administrative.

General and administrative expenses increased by $3.4 million or 22.7% in fiscal year 2010, compared to 2009; increases were the result result of $1.5 million in bonuses to executive officers, increased salaries of $0.7 million attributed also to increased head count, a $0.7 million increase in stock based compensation and $0.6 million increase in the cost of facilities.

General and administrative expenses decreased by $4.5 million or 23.0% in fiscal year 2009, when compared to 2008, primarily due to lower labor costs of $3.0 million as a result of headcount reduction from 60 to 53, respectively, and forced time off in 2009, lower stock- based compensation of $0.9 million, lower costs associated with regulatory and compliance accounting of $0.7 million, and lower travel costs of $0.3 million, offset by increased legal fees of $0.7 million primarily related to the Zygo acquisition, ongoing litigation and the Option Exchange Program.

 

33


Table of Contents

Amortization of intangible assets.

Amortization of intangibles assets in fiscal year 2010 was consistent and comparable to 2009; however, amortization in fiscal year 2009 had decreased by $2.0 million from the comparable period in 2008, primarily as a result of an impairment charge taken against these assets in 2008.

Restructuring charge.

There were no restructuring charges in 2010.

The restructuring process was completed in fiscal year 2009, hence there were no restructuring charges in 2010, conversely, as a result of increases in revenue due to the increased capital spending in the semiconductor industry, we increased our headcount.

Restructuring costs decreased by $0.4 million in fiscal year 2009 compared to fiscal year 2008. The restructuring charges associated with 51 and 25 employees respectively for the first and second quarter of 2009 were $0.7 million and $0.4 million. Twelve (12) of the employees terminated in the second quarter of 2009 were in connection with the closure of our South Korea manufacturing facility. The higher restructuring costs in 2008, compared to 2009, were attributed to workforce reduction of higher salaried and longer tenure employees.

Asset impairment.

During the fiscal year 2010, we recognized impairment charges of $0.5 million related to write-offs of various IT projects, versus an impairment charge of $1.9 million that was recognized in fiscal year 2009 related to the closure of our South Korea manufacturing facility, during the challenging economic conditions facing the semiconductor industry.

During the fiscal year 2008, we recognized an impairment charge of $54.0 million, representing a write-off of the entire amount of our previously recorded goodwill, and an impairment charge $13.1 million was recorded to reflect certain brand names and developed technology intangible assets at their fair value. We also recorded an impairment charge of $1.5 million to account for machine shop related assets at its fair value.

Operating income (loss). Our operating income in fiscal year 2010 was $41.3 million, compared to a $13.4 million loss from operations in fiscal year 2009. The improved operating margin was a result of increased revenues (145.2%), improved gross margin (183.1%) and controlled operating expenses.

Other income (expense). Our net other income (expense) consisted of the following categories (in thousands):

 

     Fiscal Year               
     2010     2009     Change  

Interest income

   $ 107      $ 53      $ 54         101.0

Interest expense

     (1,556     (1,658     102         (6.2 )% 

Other income (expense)

     814        (1,927     2,741         NM
                           

Total other income (expense), net

   $ (635   $ (3,532   $ 2,897         NM
                           

 

* NM = not meaningful

 

     Fiscal Year              
     2009     2008     Change  

Interest income

   $ 53      $ 185      $ (132     (71.4 )% 

Interest expense

     (1,658     (635     (1,023     161.1

Other income (expense)

     (1,927     1,624        (3,551     NM
                          

Total other income (expense), net

   $ (3,532   $ 1,174      $ (4,706     NM
                          

 

* NM = not meaningful

 

34


Table of Contents

During fiscal year 2010 our interest expenses were relatively flat compared to fiscal year 2009, the marginal decrease is attributed to pay down of $2.5 million on the mortgage related to our headquarter premises, as described below. Other income increased $2.7 million, due to a $2.0 million reduction in loss on foreign exchange from $1.7 million loss in fiscal year 2009 to $0.3 million gain in fiscal year 2010, and also due to $0.5 million change to the fair value of deferred payments to Zygo Corporation related to our acquisition of certain assets and entry into a supply agreement with Zygo Corporation (from $0.2 million increase in liability in fiscal year 2009, to a $0.3 million decrease in fiscal year 2010) and $0.2 million gain on sale of assets compared to 2009.

We incurred higher interest expenses in fiscal year 2009 from the comparable period in 2008 due to the Company’s borrowing of $13.5 million in connection with a mortgage against our headquarter premises entered into during July 2008 and the imputed interest of $0.6 million on fair value of deferred payments to Zygo Corporation related to our acquisition of certain assets and entry into a supply agreement with Zygo Corporation. We incurred foreign exchange loss of $1.7 million due to exchange rate fluctuations associated with our intercompany balances among our various global entities.

Provision/Benefit for income taxes.

The Company’s benefit for income taxes for 2010 of $15.2 million was primarily due to the decrease in the deferred income tax valuation allowance against US and Japan deferred tax assets and fully utilizing the Company’s Federal net operating loss carry-forwards during 2010. The Company’s benefit for income taxes for 2009 of $0.6 million was primarily a result of release of foreign income tax reserves and benefiting from refundable tax credits in the United States and United Kingdom. A provision for income taxes for 2008 of $0.4 million was primarily a result of foreign income taxes. Our effective tax rate was (37.5)%, (3.4)%, and 0.5% in 2010, 2009 and 2008, respectively. The Company maintains valuation allowances when it is likely that all or a portion of a deferred tax asset will not be realized. Changes in valuation allowances from period to period are included in the Company’s income tax provision in the period of change. In determining whether a valuation allowance is warranted, the Company takes into account such factors as prior earnings history, expected future earnings, unsettled circumstances that, if unfavorably resolved, would adversely affect utilization of a deferred tax asset, carry-back and carry-forward periods, and tax strategies that could potentially enhance the likelihood of realization of a deferred tax asset.

Net income (loss). Our net income for the fiscal year 2010 was $55.9 million, compared to a net loss of $16.3 million in fiscal year 2009, this was primarily due to the cumulative effect of increased revenues, leading to increased profits and improved absorption of manufacturing costs, as well as due to a one-time release (benefit) of income tax valuation allowance, which contributed $18.2 million.

Liquidity and Capital Resources

At January 1, 2011, our cash and cash equivalents totaled $66.5 million and working capital was $135.8 million, compared to $43.5 million cash as of January 2, 2010 and working capital of $76.8 million, respectively.

Operations –

Cash provided by operations was $27.6 million which was the result of net income of $55.9 million, partially offset by non-cash transactions of $2.7 million and $25.6 million of changes in working capital. Non-cash transactions primarily consisted of i) $17.2 million net tax benefit, primarily consisting of a $18.2 million release of income tax valuation allowance , ii) stock based compensation of $3.0 million, iii) depreciation, amortization and impairment expense of $6.3 million, and iv) increases in inventory and warranty reserves of $6.2 million. Changes in working capital were mostly due to a $21.0 million increase in receivables due to higher revenue and timing of collections, an increase of $14.5 million in inventory and a $6.8 million increase in payables and accruals as a result of better cash management.

Operating activities used cash of $5.8 million for the twelve-month period ended January 2, 2010 primarily as a result of our net loss of $16.3 million, offset by certain non-cash charges including $6.1 million amortization and depreciation, $1.9 million of asset impairment, and $2.1 million of stock-based compensation. Operating activities provided cash of $2.4 million for the twelve-month period ended December 27, 2008 resulting from our $82.7 million net loss being offset by certain non-cash charges including $68.5 million of impairment charges for long-lived assets, $8.4 million of amortization and depreciation and $3.9 million in stock-based compensation, and increases attributable to changes in our net current assets and liabilities of $4.9 million.

 

35


Table of Contents

Investing –

During the year ended January 1, 2011, investing activities used $6.1 million of cash, of which, $3.1 million was for purchases of capital equipment and patents and $3.5 million was paid to Zygo related to payments for inventories and fixed assets for the Unifire acquisition. These were offset by $0.5 million of cash received from the sale of assets, primarily related to the sale of the South Korean manufacturing facility.

Investing activities for the twelve-month period ended January 2, 2010 used cash of $0.6 million related to cash outlays of $0.8 million in capital equipment, offset by net cash received from the release of funds held in escrow in connection with our acquisition of Tevet Process Control Technologies, Ltd. (“Tevet”). Investing activities for the twelve-month period ended December 27, 2008 used cash of $6.0 million primarily related to cash outlays of $3.4 million for the Tevet acquisition and capital equipment acquisitions of $3.2 million.

Financing –

Financing activities provided $1.2 million of cash, primarily attributed to $5.8 million from issuance of common stock for stock options exercised and stock purchased under the employee stock purchase program, offset by payment of $3.0 million towards the mortgage on our corporate headquarters and $2.1 million for repurchases of our common stock.

For the twelve-month period ended January 2, 2010, financing activities provided cash of $26.0 million. Proceeds were from a follow-on public offering of our common stock of $23.3 million, combined with $3.0 million of proceeds from the sale of Company shares to employees through the Company’s Stock Option and Stock Purchase plans, and were offset by $0.3 million for repayment of debt obligation. For the twelve-month period ended December 27, 2008, financing activities provided cash of $11.8 million. Proceeds were from the issuance of $13.2 million of debt, and $0.8 million from the sale of stock from employee stock plans and purchase plan and were offset by $1.9 million used for the repurchase of our common stock and $0.2 million for debt payments.

In December 2009, we completed a public offering of our common stock resulting in the net proceeds of $23.3 million. The Company used $2.0 million of the net proceeds from the offering to repay certain obligations related to the Company’s acquisition of certain assets of Zygo Corporation in June 2009, with the remainder used for general corporate purposes, including working capital.

In February 2007, we entered into a two-year agreement for a revolving line of credit facility in a maximum principal amount of $15.0 million. On April 30, 2009, we re-negotiated to extend the maturity date of the revolving line of credit facility by an additional two years, to April 30, 2011. On June 15, 2009, we amended the financial covenants governing the credit facility to reduce the tangible net worth requirements, effective as of June 27, 2009. On April 13, 2010, we amended the revolving line of credit facility to (i) increase the maximum principal amount available there under from $15.0 million to $20.0 million, (ii) extend the maturity date of such facility by one year to April 30, 2012, and (iii) decrease the unused revolving line commitment fee from 0.25% per annum to 0.1875% per annum.

The instrument governing the facility includes certain financial covenants regarding net tangible net worth. The revolving line of credit agreement includes a provision for the issuance of commercial or standby letters of credit by the bank on our behalf. The value of all letters of credit outstanding reduces the total line of credit available. The revolving line of credit is collateralized by a blanket lien on all of our domestic assets excluding intellectual property and real estate. The minimum borrowing interest rate is 5.75% per annum. The maximum borrowing allowed on the line of credit is $20.0 million. Borrowing is limited to the lesser of (a) $7.5 million plus the borrowing base or (b) $20.0 million. The borrowing base available as of January 1, 2011 was $19.6 million. As of January 1, 2011, we were not in breach of any restrictive covenants in connection with our line of credit and debt obligations. There are no outstanding amounts drawn on this facility as of January 1, 2011. Although we have no current plans to request advances under this credit facility, we may use the proceeds of any future borrowing for general corporate purposes, future acquisitions or expansion of our business.

 

36


Table of Contents

There no drawings on (or payments to) the line of credit during the fiscal year 2010. We borrowed $7.0 million during fiscal year 2009 and also repaid the amounts in full during fiscal year 2009.

In July 2008, we entered into a loan agreement pursuant to which we borrowed $13.5 million; the loan is secured, in part, by a lien on and security interest in the building and land comprising our principal offices in Milpitas, California. The loan initially bears interest at the rate of 7.18% per annum, which rate will be reset in August 2013 to 3.03% over the weekly average yield of five-year U.S Dollar Interest Rate Swaps as published by the Federal Reserve. Monthly principal and interest payments are based on a twenty year amortization for the first sixty months and fifteen- year amortization thereafter. The remaining principal balance of the loan and any accrued but unpaid interest will be due on August 1, 2018.

On June 17, 2009, we announced a strategic business partnership with Zygo Corporation whereby Nanometrics has purchased inventory and certain other assets from Zygo Corporation and the two companies have entered into a supply agreement. The Company will make payments to Zygo Corporation (with an estimated present value of $2.6 million as of January 1, 2011) over a period of time as acquired inventory is sold and other aspects of the supply agreement are executed. A payment of $2.0 million of inventory and fixed assets was made to Zygo Corporation on January 7, 2010, in accordance with the terms of the acquisition agreement. We have evaluated and will continue to evaluate the acquisitions of products, technologies or business that are complementary to our business. These activities may result in product and business investments, which may affect our cash position and working capital balances. Some of these activities might require significant cash outlays.

Additionally, in the third quarter of 2007, our Board of Directors authorized a $4.0 million stock repurchase program, we utilized the remaining $1.3 million under this program to repurchase the Company stock. The Board of Directors authorized another $10.0 million stock repurchase program in the fourth quarter of 2010, of this, we have utilized $0.8 million. We believe our cash, cash equivalents and borrowing availability will be sufficient to meet our needs through at least the next twelve months.

Off-Balance Sheet Arrangements

None.

Contractual obligations

The following table summarizes our contractual cash obligations as of January 1, 2011, and the effect such obligations are expected to have on liquidity and cash flow in future periods (in thousands):

 

            Payments due by period  
     Total      Less than
1 Year
     1-3 Years      3-5 Years      More than
5 Years
 

Debt obligations (1)

   $ 13,705       $ 1,283       $ 3,181       $ 1,623       $ 7,618   

Fair value of deferred payments to Zygo Corporation related to acquisition

   $ 2,652       $ 750       $ 1,727       $ 81       $ 94   

Other long-term liabilities

   $ 3,472       $ —         $ 3,191       $ —         $ —     

Operating lease obligations

   $ 4,238       $ 1,537       $ 2,034       $ 472       $ 195   
                                            

Total

   $ 24,067       $ 3,570       $ 10,133       $ 2,457       $ 7,907   
                                            

 

(1) Includes interest.

We maintain certain open inventory purchase agreements with our suppliers to ensure a smooth and continuous supply chain for key components. Our liability under these purchase commitments is generally restricted to a forecasted time-horizon as mutually agreed upon between the parties. This forecast time-horizon can vary among different suppliers. We estimate our open inventory purchase commitment as of January 1, 2011 was approximately $13.2 million. Actual expenditures will vary based upon the volume of the transactions and length of contractual service provided. In addition, the amounts paid under these arrangements may be less in the event that the arrangements are renegotiated or cancelled. Certain agreements provide for potential cancellation penalties.

Excluded from the contractual obligation table above, are $1.7 million of future payments related to uncertain tax positions because we cannot reliably estimate the timing of the settlements with the respective tax authorities.

 

37


Table of Contents
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

We are exposed to financial market risks related to foreign currency exchange rates and interest rates. We do not use derivative financial instruments.

Foreign Currency Risk

A substantial part of our business consists of sales made to customers outside the United States: 65.4%, 70.3% and 70.5% of sales in 2010, 2009 and 2008, respectively. A portion of the net revenues we receive from such sales is denominated in currencies other than the U.S. dollar. Additionally, portions of our costs of net revenues and our other operating expenses are incurred by our international operations and denominated in local currencies. Foreign currency transactions resulted in a loss for 2010 of $0.3 million, a loss for 2009 of $1.7 million, and a gain for 2008 of $1.5 million.

Our exposure to foreign exchange rate fluctuations arises in part from current intercompany accounts in which costs from the United States and the United Kingdom are charged to our foreign subsidiaries. On our consolidated balance sheet these intercompany balances are eliminated and thus no consolidated balances are associated with these intercompany balances; however, since each foreign entity’s functional currency is its respective local currency, the magnitude of potential exposure to foreign exchange risk on a consolidated basis, for the Company as a whole, could be significant. Intercompany balances are denominated in US dollars and other local currencies, and the net payable from the United States parent amounted to $5.7 million as of January 1, 2011. A hypothetical change of 10% in the foreign currency exchange rate at January 1, 2011 could result in an increase or decrease of approximately $0.6 million in transaction gains or losses which would be included in our statement of operations.

Interest Rate Risk

At January 1, 2011, January 2, 2010 and December 27, 2008, the Company did not hold investments in marketable securities. As of January 1, 2011, there were no amounts borrowed against the line of credit and the interest rate on the GE loan is fixed, therefore, there are no significant interest rate risks.

In July 2008, we entered into a loan agreement pursuant to which we borrowed $13.5 million. The loan initially bears interest at the rate of 7.18% per annum, which rate will be reset after five years to 3.03% over the then weekly average yield of five-year U.S. Dollar Interest Rate Swaps as published by the Federal Reserve. Monthly principal and interest payments are based on a twenty year amortization for the first sixty months and fifteen year amortization thereafter. The remaining principal balance of the loan and any accrued but unpaid interest will be due on August 1, 2018. The loan is secured, in part, by a lien on and security interest in the building and land comprising our principal offices in Milpitas, California. At January 1, 2011 and January 2, 2010 our total debt obligation was $10.0 million and $13.1 million, respectively, with a long-term portion of $9.5 million and $12.7 million, respectively.

 

38


Table of Contents
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

The information required by Item 8 of Form 10-K is presented here in the following order:

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 

     Page  

Report of Independent Registered Public Accounting Firm (PricewaterhouseCoopers LLP)

     40   

Report of Independent Registered Public Accounting Firm (BDO, USA, LLP (formerly BDO Seidman, LLP))

     41   

Consolidated Balance Sheets

     42   

Consolidated Statements of Operations

     43   

Consolidated Statements of Stockholders’ Equity and Comprehensive Income (Loss)

     44   

Consolidated Statements of Cash Flows

     45   

Notes to Consolidated Financial Statements

     46   

 

39


Table of Contents

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Stockholders of

Nanometrics Incorporated

In our opinion, the consolidated financial statements listed in the accompanying index present fairly, in all material respects, the financial position of Nanometrics, Inc. and its subsidiaries (the Company) at January 1, 2011, and the results of their operations and their cash flows for the year then ended in conformity with accounting principles generally accepted in the United States of America. In addition, in our opinion, the financial statement schedule listed in the index appearing under Item 15(a)2(a) presents fairly, in all material respect, the information set forth therein when read in conjunction with the related consolidated financial statements. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of January 1, 2011, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for these financial statements and financial statement schedule, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express opinions on these financial statements, on the financial statement schedule and on the Company’s internal control over financial reporting based on our integrated audit. We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audit of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinions.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

/s/ PricewaterhouseCoopers LLP

San Jose, California

March 11, 2011

 

40


Table of Contents

Report of Independent Registered Public Accounting Firm

Board of Directors and Stockholders

Nanometrics Incorporated

Milpitas, California

We have audited the accompanying consolidated balance sheets of Nanometrics Incorporated as of January 2, 2010 and the related consolidated statements of operations, stockholders’ equity and comprehensive income (loss), and cash flows for each of the two years in the period ended January 2, 2010. In connection with our audits of the financial statements, we have also audited the information included in the consolidated financial statement schedule listed in Item 15 for the years ended January 2, 2010 and December 27, 2008. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Nanometrics Incorporated at January 2, 2010, and the results of its operations and its cash flows for each of the two years in the period ended January 2, 2010, in conformity with accounting principles generally accepted in the United States of America.

Also, in our opinion, the aforementioned information included in the financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, present fairly, in all material respects, the information set forth therein.

As discussed in Note 1 to the consolidated financial statements, the Company adopted FASB No. 141(R) Business Combinations, codified in ASC 805, Business Combinations, effective December 28, 2008.

/s/ BDO USA, LLP

(formerly known as BDO Seidman, LLP)

San Francisco, California

March 26, 2010

 

41


Table of Contents

NANOMETRICS INCORPORATED

CONSOLIDATED BALANCE SHEETS

(In thousands, except share amounts)

 

     January 1,
2011
    January 2,
2010
 
ASSETS     

Current assets:

    

Cash and cash equivalents

   $ 66,460      $ 43,526   

Accounts receivable, net of allowances of $63 and $241, respectively

     44,523        23,047   

Inventories

     43,168        31,472   

Inventories- delivered systems

     1,466        1,175   

Assets held for sale

     —          220   

Prepaid expenses and other

     2,986        2,182   

Deferred income taxes

     9,644        245   
                

Total current assets

     168,247        101,867   

Property, plant and equipment, net

     35,186        36,365   

Intangible assets, net

     5,972        7,067   

Deferred income tax assets – long term

     9,256        612   

Other assets

     1,235        1,559   
                

Total assets

   $ 219,896      $ 147,470   
                
LIABILITIES AND STOCKHOLDERS’ EQUITY     

Current liabilities:

    

Accounts payable

   $ 11,486      $ 5,762   

Accrued payroll and related expenses

     8,813        4,012   

Deferred revenue

     4,063        5,162   

Other current liabilities

     7,293        8,952   

Income taxes payable

     250        865   

Current portion of debt obligations

     572        343   
                

Total current liabilities

     32,477        25,096   

Deferred revenue

     3,191        646   

Other long-term liabilities

     3,912        2,235   

Debt obligations

     9,467        12,739   
                

Total liabilities

     49,047        40,716   

Stockholders’ equity:

    

Preferred stock, $0.001 par value; 3,000,000 shares authorized; no shares issued or outstanding

     —          —     

Common stock, $0.001 par value per share; 47,000,000 shares authorized; 22,314,783 and 21,506,791 respectively, issued and outstanding

     22        21   

Additional paid-in capital

     225,755        218,308   

Accumulated deficit

     (57,000     (112,948

Accumulated other comprehensive income

     2,072        1,373   
                

Total stockholders’ equity

     170,849        106,754   
                

Total liabilities and stockholders’ equity

   $ 219,896      $ 147,470   
                

See notes to consolidated financial statements.

 

42


Table of Contents

NANOMETRICS INCORPORATED

CONSOLIDATED STATEMENTS OF OPERATIONS

(In thousands, except per share amounts)

 

     Years Ended  
     January 1,
2011
    January 2,
2010
    December 27,
2008
 

Net revenues:

      

Products

   $ 154,548      $ 49,153      $ 75,596   

Service

     33,517        27,554        26,505   
                        

Total net revenues

     188,065        76,707        102,101   
                        

Costs of net revenues:

      

Cost of products

     66,484        26,594        38,692   

Cost of service

     19,328        13,992        18,675   
                        

Total costs of net revenues

     85,812        40,586        57,367   
                        

Gross profit

     102,253        36,121        44,734   

Operating expenses:

      

Research and development

     18,973        14,672        17,110   

Selling

     21,320        15,072        17,798   

General and administrative

     18,617        15,168        19,689   

Amortization of intangibles assets

     1,556        1,535        3,531   

Restructuring charge

     —          1,134        1,525   

Asset impairment

     463        1,899        68,545   
                        

Total operating expenses

     60,929        49,480        128,198   
                        

Income (loss) from operations

     41,324        (13,359     (83,464
                        

Other income (expense):

      

Interest income

     107        53        185   

Interest expense

     (1,556     (1,658     (635

Other, net

     814        (1,927     1,624   
                        

Total other income (expense), net

     (635     (3,532     1,174   
                        

Income (loss) before income taxes

     40,689        (16,891     (82,290

Provision (benefit) for income taxes

     (15,259     (586     436   
                        

Net income (loss)

   $ 55,948      $ (16,305   $ (82,726
                        

Basic net income (loss) per share

   $ 2.56      $ (0.87   $ (4.46
                        

Diluted net income (loss) per share

   $ 2.43      $ (0.87   $ (4.46
                        

Shares used in per share computation:

      

Basic

     21,855        18,639        18,546   
                        

Diluted

     22,998        18,639        18,546   
                        

See notes to consolidated financial statements.

 

43


Table of Contents

NANOMETRICS INCORPORATED

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY AND

COMPREHENSIVE INCOME (LOSS)

(In thousands, except share amounts)

 

    Common Stock     Additional
Paid-In
    Accumulated     Accumulated
Other
Comprehensive
    Total
Stockholders’
    Comprehensive  
    Shares     Amount     Capital     Deficit     Income (Loss)     Equity     Income (Loss)  

Balances, December 29, 2007

    18,620,682      $ 19      $ 187,180      $ (13,917   $ 2,562      $ 175,844     

Comprehensive loss:

             

Net income (loss)

    —          —          —          (82,726     —          (82,726   $ (82,726

Other comprehensive income

             

Employee benefit plan adjustment

            157        157        157   

Foreign currency translation adjustments

    —          —          —          —          (3,254     (3,254     (3,254
                   

Comprehensive loss

    —          —          —          —          —          —        $ (85,823
                   

Issuance of common stock under stock-based compensation plans

    339,424        —          806        —          —          806     

Stock-based compensation expense

    —          —          3,881        —          —          3,881     

Repurchases and retirement of common stock

    (547,052     (1 )     (1,940     —          —          (1,941  
                                                 

Balances, December 27, 2008

    18,413,054      $ 18      $ 189,927      $ (96,643   $ (535   $ 92,767     

Comprehensive loss:

             

Net income (loss)

    —          —          —          (16,305     —          (16,305   $ (16,305

Other comprehensive income

             

Employee benefit plan adjustment

            110        110        110   

Foreign currency translation adjustments

    —          —          —          —          1,798        1,798        1,798   
                   

Comprehensive loss

    —          —          —          —          —          $ (14,397
                   

Issuance of common stock under stock-based compensation plans

    786,585        1       3,037        —          —          3,038     

Common stock offering, net of $426 offering costs

    2,307,152        2        23,290        —          —          23,292     

Stock-based compensation expense

    —          —          2,054        —          —          2,054     
                                                 

Balances, January 2, 2010

    21,506,791      $ 21      $ 218,308      $ (112,948   $ 1,373      $ 106,754     

Comprehensive loss:

             

Net income (loss)

    —          —          —          55,948        —          55,948      $ 55,948   

Other comprehensive income

             

Employee benefit plan adjustment

    —          —          —          —          (51     (51     (51

Foreign currency translation adjustments

    —          —          —          —          750        750        750   
                   

Comprehensive income (loss)

    —          —          —          —          —          $ 56,647   
                   

Issuance of common stock under stock-based compensation plans

    969,484        1        6,622        —          —          6,623     

Common stock offering costs

    —          —          (28     —          —          (28  

Stock-based compensation expense

    —          —          2,950        —          —          2,950     

Repurchases and retirement of common stock

    (161,492     —          (2,097         (2,097  
                                                 

Balances, January 1, 2011

    22,314,783      $ 22      $ 225,755      $ (57,000   $ 2,072      $ 170,849     
                                                 

See notes to consolidated financial statements.

 

44


Table of Contents

NANOMETRICS INCORPORATED

CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands, except share amounts)

 

    Years Ended  
    January 1,
2011
    January 2,
2010
    December 27,
2008
 

Cash flows from operating activities:

     

Net income (loss)

  $ 55,948      $ (16,305   $ (82,726

Reconciliation of net income (loss) to net cash provided by (used in) operating activities:

     

Depreciation and amortization

    5,858        6,092        8,429   

Stock-based compensation

    2,950        2,054        3,881   

Excess tax benefit from equity awards

    (801     —          —     

Asset impairment

    463        1,899        68,545   

Loss (gain) on disposal of asset

    (140     82        (72

Inventory reserve

    1,457        376        (112

Changes in warranty reserves

    4,770        1,439        1,923   

Deferred taxes

    (17,233     (426     (771

Unrealized foreign exchange loss (gain)

    (523     939        (1,518

Fair value changes of deferred payments to Zygo Corporation related to acquisition

    467        596        —     

Changes in assets and liabilities, net of effects of assets acquired and liabilities assumed in acquisitions:

     

Accounts receivable

    (20,996     (5,971     18,304   

Inventories

    (14,495     1,572        (33

Inventories – delivered systems

    244        (975     580   

Prepaid expenses and other

    (398     (113     1,172   

Accounts payable, accrued and other liabilities

    6,763        (664     (14,637

Deferred revenue

    1,414        3,941        (777

Income taxes payable

    1,879        (291     261   
                       

Net cash provided by (used in) operating activities

    27,627        (5,755     2,449   
                       

Cash flows from investing activities:

     

Cash received from Tevet on escrow settlement

    —          215        —     

Purchase of Tevet’s net assets, net of cash received

    —          —          (3,357

Payments to Zygo, related to acquisition

    (3,503    

Purchases of property, plant and equipment

    (3,096     (822     (3,237

Proceeds from sale of property, plant and equipment

    492        9        625   
                       

Net cash provided by (used in) investing activities

    (6,107     (598     (5,969
                       

Cash flows from financing activities:

     

Proceeds from issuance of debt obligations, net of issuance costs

    —          —          13,203   

Borrowings from line of credit

    —          7,000        —     

Repayment of line of credit

    —          (7,000     —     

Repayments of debt obligations

    (2,999     (319     (243

Repurchases of common stock

    (2,097     —          (1,941

Proceeds from issuance of common stock under employee stock purchase and stock option plans

    5,784        3,038        806   

Excess tax benefit from equity awards

    801        —          —     

Taxes on net issuance of stock awards

    (299     —          —     

Proceeds from issuance of common stock offering, net of $426 offering costs

    (28     23,292        —     
                       

Net cash provided by financing activities

    1,162        26,011        11,825   
                       

Effect of exchange rate changes on cash and cash equivalents

    252        (112     756   
                       

Net increase in cash and cash equivalents

    22,934        19,546        9,061   

Cash and cash equivalents, beginning of year

    43,526        23,980        14,919   
                       

Cash and cash equivalents, end of year

  $ 66,460      $ 43,526      $ 23,980   
                       

Supplemental disclosure of cash flow information:

     

Cash paid for interest

  $ 965      $ 1,038      $ 623   
                       

Cash paid for income taxes

  $ 1,572      $ 153      $ 797   
                       

Capitalization of inventory as property, plant and equipment

  $ 1,107      $ 1,166      $ 255   
                       

Fair value of deferred payments to Zygo Corporation related to acquisition (see Note 3)

  $ 2,652      $ 5,092      $ —     
                       

See notes to consolidated financial statements.

 

45


Table of Contents

NANOMETRICS INCORPORATED

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Years Ended January 1, 2011, January 2, 2010 and December 27, 2008

Note 1. Significant Accounting Policies

Description of Business – Nanometrics Incorporated (“Nanometrics” or the “Company”) and its wholly owned subsidiaries design, manufacture, market, sell and support thin film, optical critical dimension and overlay dimension metrology systems used primarily in the manufacturing of semiconductors, solar PVs and HB-LEDs, as well as by customers in the silicon wafer and data storage industries. These metrology systems precisely measure a wide range of film types deposited on substrates during manufacturing in order to control manufacturing processes and increase production yields in the fabrication of integrated circuits. The thin film metrology systems use a broad spectrum of wavelengths, high-sensitivity optics, proprietary software, and patented technology to measure the thickness and uniformity of films deposited on silicon and other substrates as well as their chemical composition. The Company’s optical critical dimension technology is a patented critical dimension measurement technology that is used to precisely determine the dimensions on the semiconductor wafer that directly control the resulting performance of the integrated circuit devices. The overlay metrology systems are used to measure the overlay accuracy of successive layers of semiconductor patterns on wafers in the photolithography process. The corporate headquarters of Nanometrics is located in Milpitas, California.

Basis of Presentation – The consolidated financial statements include Nanometrics Incorporated and its wholly-owned subsidiaries. All significant intercompany accounts and transactions have been eliminated in consolidation.

Fiscal Year – The Company uses a 52/53 week fiscal year ending on the Saturday nearest to December 31. Accordingly, 2010 consisted of 52 weeks ending January 1, 2011 (fiscal year 2010), 2009 consisted of 53 weeks ending January 2, 2010 (fiscal year 2009), and 2008 consisted of 52 weeks and ended on December 27, 2008 (fiscal year 2008).

Reclassification – Certain fiscal years 2009 and 2008 amounts have been reclassified to conform to the current year presentation.

Use of Estimates – The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reported period. Actual results could differ materially from those estimates. Estimates are used for, but not limited to, revenue recognition, the provision for doubtful accounts, the provision for excess, obsolete, or slow moving inventories, depreciation and amortization, valuation of intangible assets and long-lived assets, warranty reserves, income taxes, valuation of stock-based compensation, and contingencies.

Foreign Currency Translation – The assets and liabilities of foreign subsidiaries are translated from their respective local functional currencies at exchange rates in effect at the balance sheet date and income and expense accounts are translated at average exchange rates during the reporting period. Resulting translation adjustments are reflected in “Accumulated other comprehensive income,” a component of stockholders’ equity. Foreign currency transaction gains and losses are reflected in “Other income (expense)” in the consolidated statements of operations in the period incurred and consist of income for 2010 of $0.3 million, a loss for 2009 of $1.7 million, and income for 2008 of $1.5 million, respectively.

Revenue Recognition – The Company recognizes revenue when persuasive evidence of an arrangement exists, delivery has occurred or services have been rendered, the seller’s price is fixed or determinable, and collectability is reasonably assured. The Company derives revenue from the sale of process control metrology systems (“Product revenue”) as well as spare part sales, billable service, service contracts, and upgrades (together “Service revenue”). Upgrades are a group of parts that change the existing configuration of a product and are included in Service revenue. They are distinguished from Product revenue, which consists of complete, automated process control metrology systems (the “system(s)”). Nanometrics’ systems consist of hardware and of software which is incidental to the systems. Arrangements for sales of systems often include defined customer-specified acceptance criteria.

 

46


Table of Contents

For product sales to existing customers, revenue recognition occurs at the time title and risk of loss transfer, which usually occurs upon shipment from the Company’s manufacturing location, if it can be reliably demonstrated that the product has successfully met the defined customer specified acceptance criteria, and all other recognition criteria has been met. This occurs at the time of shipment as the terms are FOB shipping point. For initial sales of product where the Company has not previously met the defined customer specified acceptance criteria, product revenues are recognized upon the earlier of receipt of written customer acceptance or expiration of the contractual acceptance period. In Japan, where contractual terms with the customer specify risk of loss and title transfers upon customer acceptance, revenue is recognized upon receipt of written customer acceptance, provided that all other recognition criteria have been met. Upon recognition of product revenue, a liability is recorded for anticipated warranty costs.

As part of its customer service, the Company sells software that is considered to be an upgrade to the customer’s existing system. Such software is specific to the type of tool being upgraded and cannot be used in other tools. Software is not a significant focus of the Company’s product offerings and marketing efforts, and the Company does not provide post-sale customer service. Revenue on software upgrades is recognized when the software is delivered to the customer, provided that all other recognition criteria have been met.

All of the Company’s products are assembled prior to shipment to customers. The Company performs installation for its customers; however, such an installation is inconsequential and perfunctory, could be provided by outside third parties, and is not considered essential to the functionality of the equipment.

Revenue related to spare part sales is recognized upon shipment. Revenue related to billable service is recognized as the services are performed and, if billable service and spare parts are sold together, revenue is recognized when both the parts are delivered and the service is completed. Service contracts may be purchased by the customer during or after the warranty period, and for service contracts, revenue is recognized ratably over the service contract period. Revenue on upgrades (including software upgrades) is recognized when the upgrade has been delivered to the customer. For initial upgrade sales where the Company has not previously met the defined customer specified acceptance criteria, if any, revenue is recognized upon the earlier of receipt of written customer acceptance or the expiration of the contractual acceptance period. On occasion, customers request a warranty period longer than the Company’s standard 12 month warranty. In those instances where extended warranty services are separately quoted to the customer, the associated revenue is deferred and recognized as service revenue ratably over the term of the contract. The portion of service contracts and extended warranty services agreements that are uncompleted at the end of any reporting period are included in deferred revenue. The Company generally does not provide customers with any return rights.

In cases where the Company can ascertain the fair value of all the elements, and certain elements of a sales arrangement are not delivered and accepted at the same time, the relative fair value of the undelivered element is deferred until that element is delivered and accepted by the customer. In multiple-element arrangements where the Company only has fair value of the undelivered elements, the residual method is applied. In order to recognize revenue associated with delivered elements, the following criteria must be met: (a) the delivered item(s) has value to the customer on a standalone basis; (b) there is objective and reliable evidence of the fair value of the undelivered item(s); and (c) delivery or performance of the undelivered item(s) is considered probable and is substantially in the control of the Company. If the arrangement does not meet all the above criteria, the entire amount of the sales contract is deferred until the above criteria have been met or all elements have been delivered to the customer. Objective and reliable evidence of the fair value of an element is based on the amounts for which the Company sells equivalent products or services on a standalone basis.

Cash and Cash Equivalents – The Company considers all highly liquid investments with original maturities of three months or less, when purchased, to be cash equivalents.

Fair Value of Financial Instruments – Financial instruments include cash and cash equivalents, accounts receivable, accounts payable and debt obligations. Cash equivalents are stated at fair market value based on quoted market prices. The carrying values of accounts receivable and accounts payable approximate their fair values because of the short-term maturity of these financial instruments.

Allowance for Doubtful Accounts – The Company maintains allowances for estimated losses resulting from the inability of its customers to make required payments. Credit limits are established through a process of reviewing the financial history and stability of its customers. Where appropriate and available, the Company obtains credit rating reports and financial statements of customers when determining or modifying their credit limits. The Company regularly evaluates the collectability of its trade receivable balances based on a combination of factors such as the length of time the receivables are past due, customary payment practices in the

 

47


Table of Contents

respective geographies and historical collection experience with customers. The Company believes that its allowance for doubtful accounts adequately reflects the risk associated with its receivables. If however, the financial conditions of customers were to deteriorate, resulting in their inability to make payments, the Company may need to record additional allowances which would result in additional general and administrative expenses being recorded for the period in which such determination was made.

Inventories – Inventories are stated at the lower of standard cost (which approximates actual cost on a first-in, first-out basis), or market. The Company is exposed to a number of economic and industry factors that could result in portions of inventory becoming either obsolete or in excess of anticipated usage, or saleable only for amounts that are less than their carrying amounts. These factors include, but are not limited to, technological changes in the market, the Company’s ability to meet changing customer requirements, competitive pressures in products and prices, and the availability of key components from suppliers. The Company has established inventory reserves when conditions exist that suggest that inventory may be in excess of anticipated demand or is obsolete based upon assumptions about future demand for the Company’s products and market conditions. Once a reserve has been established, it is maintained until the part to which it relates is sold or is otherwise disposed off. The Company regularly evaluates its ability to realize the value of inventory based on a combination of factors including the following: historical usage rates, forecasted sales of usage, product end-of-life dates, estimated current and future market values and new product introductions. For demonstration inventory, the Company also considers the age of the inventory and potential cost to refurbish the inventory prior to sale. Demonstration inventory is amortized over its useful life and the amortization expense is included in total depreciation and amortization on the cash flow statement. When recorded, reserves are intended to reduce the carrying value of the Company’s inventory to its net realizable value. If actual demand for the Company’s products deteriorates, or market conditions are less favorable than those that the Company projects, additional reserves may be required.

Inventories – delivered systems – The Company reflects the cost of systems that were invoiced upon shipment but deferred for revenue recognition purposes separate from its inventory held for sale as “Inventories – delivered systems”.

Property, Plant and Equipment – Property, plant and equipment are stated at cost. Depreciation is computed using the straight–line method over the following estimated useful lives of the assets:

 

Building and improvements

     5–40 years   

Machinery and equipment

     3–10 years   

Furniture and fixtures

     3–10 years   

Goodwill and Intangible Assets – Goodwill is initially recorded when the purchase price paid for an acquisition exceeds the estimated fair value of the net identified tangible and intangible assets acquired. Intangible assets with finite lives are amortized over their useful lives while goodwill and indefinite lived assets are not amortized but tested annually for impairment. The Company’s impairment review process is completed as of the last day of November of each year or whenever events or circumstances occur which indicate that an impairment might have occurred. The Company follows the two-step approach to determining whether and by how much goodwill has been impaired. The first step requires a comparison of the fair value of Nanometrics’ reporting units to its net book value. If the fair value is greater, then no impairment is deemed to have occurred. If the fair value is less, then the second step must be performed to determine the amount, if any, of actual impairment. During 2008, the company wrote off the entire Goodwill of $54.0 million. See Note 6, Goodwill and Long-Lived Asset Impairment.

Long-Lived Assets – The Company evaluates its long-lived assets for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. When the sum of the undiscounted future net cash flows expected to result from the use of the asset and its eventual disposition is less than its carrying amount, impairment may exist. To determine the amount of impairment, the Company compares the fair value of the asset to its carrying value. If the carrying value of the asset exceeds its fair value, an impairment loss equal to the difference is recognized. See Note 6, Goodwill and Long-Lived Asset Impairment.

Restructuring Charge – The Company records estimated expenses for severance and other costs as incurred as restructuring plans are executed. Costs associated with restructuring activities have been recognized when they are incurred rather than the date of a commitment to an exit or disposal plan. A liability for post-employment benefits is

 

48


Table of Contents

recorded when payment is probable, the amount is reasonably estimable, and the obligation relates to rights that have vested or accumulated. Given the significance and complexity of restructuring activities, and the timing of the execution of such activities, the restructuring process involves periodic reassessments of the estimates made at the time the original decisions were made, including evaluating market conditions for expected disposals of assets and vacancy of space. Although the Company believes that these estimates accurately reflect the costs of the restructuring programs, actual results may vary or differ, thereby requiring us to record additional provisions or reverse a portion of such provisions.

Income Tax Assets and Liabilities – The Company accounts for income taxes whereby deferred tax assets and liabilities must be recognized using enacted tax rates for the effect of temporary differences between the book and tax accounting for assets and liabilities. Also, deferred tax assets must be reduced by a valuation allowance to the extent that management cannot conclude that it is more likely than not that a portion of the deferred tax asset will be realized in the future. The Company evaluates the deferred tax assets periodically to determine whether or not a valuation allowance is appropriate. Factors used in this determination include future expected income and the underlying asset or liability which generated the temporary tax difference. The income tax provision is primarily impacted by federal statutory rates, state and foreign income taxes and changes in the valuation allowance.

 

49


Table of Contents

Accumulated Other Comprehensive Income (Loss) – The composition of accumulated other comprehensive income (loss) is as follows:

 

     Years Ended  
     Foreign
Currency
Translations
    Defined
Benefit
Pension Plans
    Accumulated
Other
Comprehensive
Income (Loss)
 

Balance as of December 28, 2008

   $ (347   $ (188   $ (535

Current period change

     1,798        110        1,908   
                        

Balance as of January 2, 2010

     1,451        (78     1,373   

Current period change

     750        (51     699   
                        

Balance as of January 1, 2011

   $ 2,201      $ (129   $ 2,072   
                        

The items above, did not impact the Company’s income tax provision.

Product Warranties – The Company sells the majority of its products with a 12 month repair or replacement warranty from the date of acceptance which generally represents the date of shipment. The Company provides an accrual for estimated future warranty costs based upon the historical relationship of warranty costs to the cost of products sold. The estimated future warranty obligations related to product sales are reported in the period in which the related revenue is recognized. The estimated future warranty obligations are affected by the warranty periods, sales volumes, product failure rates, material usage and labor and replacement costs incurred in correcting a product failure. If actual product failure rates, material usage, labor or replacement costs differ from the Company’s estimates, revisions to the estimated warranty obligations would be required. For new product introductions where limited or no historical information exists, the Company may use warranty information from other previous product introductions to guide us in estimating the warranty accrual. The warranty accrual represents the best estimate of the amount necessary to settle future and existing claims on products sold as of the balance sheet date. The Company periodically assesses the adequacy of its recorded warranty reserve and adjusts the amounts in accordance with changes in these factors.

Guarantees – In addition to product warranties, from time to time, in the normal course of business, the Company indemnifies certain customers with whom it enters into a contractual relationship. The Company has agreed to hold the other party harmless against third party claims that its products, when used for their intended purpose(s), infringe the intellectual property rights of such third party or other claims made against certain parties. It is not possible to determine the maximum potential amount of liability under these indemnification obligations due to the limited history of prior indemnification claims and the unique facts and circumstances that are likely to be involved in each particular claim. Historically, the Company has not made payments under these obligations and believes the estimated fair value of these agreements is minimal. Accordingly, no liabilities have been recorded for these obligations on the balance sheets as of January 1, 2011 and January 2, 2010.

Shipping and Handling Costs – Shipping and handling costs are included as a component of cost of revenues.

Advertising Costs – The Company expenses advertising costs as incurred. Advertising costs were $0.1 million in 2010, these costs were immaterial in 2009, and were $0.1 million in 2008, and did not include expenses related to trade shows.

Stock-Based Compensation – The Company estimates the value of employee stock options on the date of grant using the Black-Scholes model. The determination of fair value of share-based payment awards on the date of grant using an option-pricing model is affected by the Company’s stock price as well as assumptions regarding a number of highly complex and subjective variables. These variables include, but are not limited to the expected stock price volatility over the term of the awards, and actual and projected employee stock option exercise behaviors. The expected term of options granted is calculated based on the simplified method allowed under SEC Staff Accounting Bulletin (“SAB”) 107(“SAB 107”). The expected volatility is based on the historical volatility of the Company’s stock price.

 

50


Table of Contents

Defined Employee Benefit PlansThe Company maintains a defined benefit pension plan in Taiwan for which current service costs are charged to operations as they accrue based on services rendered by employees during the year. Pension benefit obligations are determined by using management’s actuarial assumptions, including discount rates, assumed asset rates of return, compensation increases and employee turnover rates.

Net Income Per Share – Basic net income (loss) per share excludes dilution and is computed by dividing net income (loss) by the number of weighted average common shares outstanding for the period. Diluted net income (loss) per share reflects the potential dilution from outstanding dilutive stock options (using the treasury stock method) and shares issuable under the employee stock purchase plan. The Company had net income in fiscal year 2010, therefore, the potential dilutive effect of stock options was considered to calculate the diluted income per share. During fiscal years 2009 and 2008, the Company incurred net losses, therefore, diluted net loss per share excludes common equivalent shares outstanding, as their effect is anti-dilutive. The total number of common equivalent shares outstanding during 2010, 2009 and 2008 was 0.7 million, 2.4 million and 3.0 million, respectively. The total number of common equivalent shares includes stock options with exercise prices in excess of the fair market value of our common stock, which are always excluded from diluted weighted average shares outstanding, as their effect is anti-dilutive. The reconciliation of the share denominator used in the basic and diluted net income per share computations is as follows (in thousands):

 

     Years Ended  
     January 1,
2011
     January 2,
2010
     December 27,
2008
 

Weighted average shares outstanding – shares used in basic net income per share computation

     21,855         18,639         18,546   

Dilutive effect of stock options, using the treasury stock method

     1,143         —           —     
                          

Shares used in diluted net income per share computation

     22,998         18,639         18,546   
                          

Certain Significant Risks and Uncertainties – Financial instruments which potentially subject the Company to concentration of credit risk consist of cash and cash equivalents, and accounts receivable. See also Note 7, Sale of Accounts Receivable.

 

51


Table of Contents

Cash and cash equivalent deposits with financial institutions may, at times, exceed federally insured limits; however, the Company has not experienced any losses on such accounts. The Company maintains its cash and cash equivalents in deemed deposit accounts and money market accounts with large financial institutions.

The Company sells its products primarily to end users in the United States, Asia and Europe and, generally, does not require its customers to provide collateral or other security to support accounts receivable. Management performs ongoing credit evaluations of its customers’ financial condition and maintains an allowance for estimated potential bad debt losses. The Company’s customer base is highly concentrated and historically, a relatively small number of customers have accounted for a significant portion of its revenues. Aggregate revenue from the Company’s top five largest customers in 2010, 2009 and 2008 consisted of 61%, 60% and 43%, respectively, of its total net revenues. The Company participates in a dynamic high technology industry and believes that changes in any of the following areas could have a material adverse effect on its future financial position, results of operations or cash flows. Advances and trends in new technologies and industry standards; competitive pressures in the form of new products or price reductions on current products; changes in product mix; changes in the overall demand for products offered; changes in third-party manufacturers; changes in key suppliers; changes in certain strategic relationships or customer relationships; litigation or claims against the Company based on intellectual property, patent, product, regulatory or other factors; fluctuations in foreign currency exchange rates; risk associated with changes in domestic and international economic and/or political regulations; availability of necessary components or subassemblies; disruption of manufacturing facilities; and its ability to attract and retain employees necessary to support its growth.

Certain components and subassemblies used in the Company’s products are purchased from a sole supplier or a limited group of suppliers. In particular, the Company currently purchases its spectroscopic ellipsometer and robotics used in its advanced measurement systems from a sole supplier or a limited group of suppliers located in the United States. Any shortage or interruption in the supply of any of the components or subassemblies used in its products or its inability to procure these components or subassemblies from alternate sources on acceptable terms could have a material adverse effect on its business, financial condition and results of operations.

Recently Issued Accounting Pronouncements

In January 2010, the FASB issued Accounting Standards Update (“ASU”) 2010-06, Improving Disclosures about Fair Value Measurements, which amends ASC 820 to add two new disclosures: (1) transfers in and out of Level 1 and 2 measurements and reasons for the transfers, and (2) a gross presentation of activity within the Level 3 roll forward. The ASU also includes clarifications to existing disclosure requirements on the level of disaggregation and disclosures regarding inputs and valuation techniques. The ASU is effective for interim and annual reporting periods beginning after December 15, 2009, except for the separate disclosures about purchases, sales, issuances, and settlements in the roll forward of activity in Level 3 fair value measurements. Those disclosures are effective for fiscal years beginning after December 15, 2010, and for interim periods within those fiscal years. In the period of initial adoption, entities will not be required to provide the amended disclosures for any previous periods presented for comparative purposes. However, comparative disclosures are required for periods after initial adoption. The adoption of the initial disclosure requirements included in this pronouncement, did not have a material impact on the consolidated financial statements of the Company.

In September 2009, the FASB ratified ASU 2009 -13 (ASU 2009-13) previously Emerging Issues Task Force (EITF) Issue No. 08-1, Revenue Arrangements with Multiple Deliverables (ASC 605-25) which provides principles and application guidance on whether multiple deliverables exist, how the arrangement should be separated, and how the consideration should be allocated. It also requires an entity to allocate revenue in an arrangement using estimated selling prices of deliverables if a vendor does not have vendor-specific objective evidence or third-party evidence of the selling price. The guidance eliminates the use of the residual method, requires entities to allocate revenue using relative pricing and significantly expands the disclosure requirements for multiple-deliverable revenue arrangements.

Also in September 2009, the FASB ratified ASU 2009-14 (previously EITF Issue No. 09-3, Certain Revenue Arrangement That Include Software Elements). ASU 2009-14 modifies the scope of software revenue recognition to remove tangible products from the scope of the software revenue guidance if the products contain both software and non-software components that function together to deliver a product’s essential functionality, and provides guidance on determining whether software deliverables in an arrangement that includes a tangible product are within the scope of the software revenue guidance.

 

52


Table of Contents

The new standards are effective for revenue recognition arrangements that began or are changed in fiscal years starting after June 15, 2010, and early adoption is permitted. The Company is currently evaluating the impact of these amendments on its revenue recognition policies, as well as the impact on its financial statements.

In April 2009, the FASB issued FSP SFAS No. 141(R)-1, Accounting for Assets Acquired and Liabilities Assumed in a Business Combination That Arise from Contingencies, as codified by ASC 805 Business Combination (ASC 805). This standard amends the provisions related to the initial recognition and measurement, subsequent measurement and disclosure of assets and liabilities arising from acquired contingencies in a business combination, thereby requiring that such contingencies be recognized at fair value on the acquisition date if fair value can be reasonably estimated during the allocation period. Otherwise, entities would typically account for the acquired contingencies in accordance with SFAS No. 5, Accounting for Contingencies, as codified by ASC 450 Contingencies. This standard applies prospectively to business combinations for which the acquisition date is on or after the beginning of the first annual reporting period beginning on or after December 15, 2008, or the first quarter of 2009. On June 17, 2009, the Company completed a business combination with Zygo Corporation as discussed in Note 3, which is accounted for in accordance with ASC 805.

Note 2. Fair Value Measurements and Disclosures

Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. The standard assumes that the transaction to sell the asset or transfer the liability occurs in the principal or most advantageous market for the asset or liability and establishes that the fair value of an asset or liability shall be determined based on the assumptions that market participants would use in pricing the asset or liability.

Fair Value Hierarchy

The Company determines the fair values of its financial instruments based on the fair value hierarchy established in ASC 820, which requires an entity to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value. The classification of a financial asset or liability within the hierarchy is based upon the lowest level input that is significant to the fair value measurement. The fair value hierarchy prioritizes the inputs into three levels that may be used to measure fair value:

Level 1 — Quoted prices in active markets for identical assets or liabilities.

Level 2 — Inputs other than Level 1 that are observable, either directly or indirectly, such as quoted prices for similar assets and liabilities in active markets or inputs that are observable for the asset or liability, either directly or indirectly through market corroboration, for substantially the full term of the financial instrument.

Level 3 — Unobservable inputs that are supported by little or no market activity and are significant to the fair value of the assets or liabilities. Such unobservable inputs include an estimated discount rate used in our discounted present value analysis of future cash flows, which reflects our estimate of debt with similar terms in the current credit markets. As there is currently minimal activity in such markets, the actual rate could be materially different. The following table presents the Company’s fair value measurements that are measured at the estimated fair value, on a recurring basis, categorized in accordance with the fair value hierarchy (in thousands):

 

As of January 1, 2011

   Quoted Prices
in Active
Markets for
Identical
Assets
(Level 1)
     Significant
Other
Observable
Inputs
(Level 2)
     Significant
Unobservable
Inputs
(Level 3)
     Total  

Cash and cash equivalents (all short term):

           

Cash

   $ 14,750       $ —         $ —         $ 14,750   

Money market account

     51,710         —           —           51,710   
                                   

Total cash and cash equivalents

     66,460         —           —           66,460   
                                   

Total financial assets

   $ 66,460       $ —         $ —         $ 66,460   
                                   

Fair value of deferred payments to Zygo Corporation related to acquisition

   $ —         $ —         $ 2,652       $ 2,652   

Fair value of GE loan

     —           —           9,869         9,869   
                                   

Total financial liabilities

   $ —         $ —         $ 12,521       $ 12,521   
                                   

 

53


Table of Contents

As of January 2, 2010

   Quoted Prices
in Active
Markets for
Identical
Assets
(Level 1)
     Significant
Other
Observable
Inputs
(Level 2)
     Significant
Unobservable
Inputs
(Level 3)
     Total  

Cash and cash equivalents (all short term):

           

Cash

   $ 8,609       $ —         $ —         $ 8,609   

Money market account

     34,917         —           —           34,917   
                                   

Total cash and cash equivalents

     43,526         —           —           43,526   
                                   

Total financial assets

   $ 43,526       $ —         $ —         $ 43,526   
                                   

Fair value of deferred payments to Zygo Corporation related to acquisition

   $ —         $ —         $ 5,688       $ 5,688   

Fair value of GE loan

     —           —           11,953         11,953   
                                   

Total financial liabilities

   $ —         $ —         $ 17,641       $ 17,641   
                                   

Changes in the Company’s Level 3 liabilities for fiscal 2010 were as follows (in thousands):

 

     Level 3  

Fair value at December 27, 2008

   $ —     

Fair value of deferred and contingent payment related to Zygo acquisition

     5,092   

Change in fair value included in earnings

     596   
        

Fair value of Level 3 liability at January 2, 2010

     5,688   

Payments made to Zygo Corporation

     (3,503

Change in fair value included in earnings

     467   
        

Fair value at January 1, 2011

   $ 2,652   
        

As of January 1, 2011, the Company has a liability of $2.7 million resulting from the acquisition of certain assets from Zygo Corporation (“Zygo”) which is measured at fair value on a recurring basis. Of that amount, $0.8 million is a current liability and $1.9 million is a long-term liability. The fair value of this liability was determined using level 3 inputs. See Note 3 for discussion of assumptions used to measure the fair value of the Zygo liability.

As of January 2, 2010, the Company had assets held for sale of $0.2 million related to the Company’s South Korean manufacturing facility. The assets primarily included semiconductor equipment and buildings. The fair value of these assets was determined based on level 3 inputs, including, a third party appraisal. Losses recognized in fiscal year 2009 due to fair value measurements using level 3 inputs was $1.9 million. These assets were subsequently sold in the second quarter of year 2010 for a gain of $0.2 million. The Company had no assets held for sale as of January 1, 2011.

 

     Year ended
January 1, 2010
     Quoted Prices
in Active
Markets for
Identical
Assets
(Level 1)
     Significant
Other
Observable
Inputs
(Level 2)
     Significant
Unobservable
Inputs
(Level 3)
     Total Gains
(Losses)
 

Assets held for sale

   $ 220       $ —         $ —         $ 220       $ (1,899

 

54


Table of Contents

Other financial instruments include cash and cash equivalents, accounts receivable, accounts payable and debt obligations. Cash equivalents are stated at fair market value based on quoted market prices. The carrying values of accounts receivable and accounts payable approximate their fair values because of the short term maturity of these financial instruments.

Note 3. Acquisitions

There were no business acquisitions made by the Company during the fiscal year 2010.

On June 17, 2009 (“acquisition date”), Nanometrics announced that it had purchased inventory and certain other assets of Zygo Corporation (“Zygo”) and that the two companies had entered into a supply agreement. The supply agreement is an exclusive Original Equipment Manufacturer (“OEM”) arrangement in which Zygo will provide interferometer sensors to Nanometrics for incorporation into the Unifire™ line of products as well as the Nanometrics family of automated metrology systems. The arrangement is structured as an asset transfer and exclusive OEM supply agreement aimed at wafer-based markets. Nanometrics will assume all inventory and customer sales and support responsibilities and Zygo will provide measurement sensors for integration by Nanometrics. By completing this acquisition, Nanometrics anticipates expanding its served markets to include the high end of dimensional control metrology for the rapidly-growing back-end-of-line packaging market, while also enhancing our product offerings to front-end-of-line metrology customers. In addition to the applications currently addressed by Nanometrics and Zygo products, the business partnership allows for the joint development of additional technology solutions targeted at the semiconductor and related industries. This transaction met the conditions of a business combination as defined in ASC 805, and as such is accounted for under ASC 805. The results from the Unifire™ line of business were included in the Company’s condensed consolidated statements of operations from the acquisition date.

The following table summarizes the fair value of consideration recorded and the fair value of acquired assets (in thousands):

 

     Amounts  

Assets acquired:

  

Tangible assets:

  

Inventories – raw materials

   $ 2,014   

Property, plant and equipment – machinery and equipment

     1,378   
        

Total tangible assets acquired

     3,392   
        

Intangible assets:

  

Developed technology

     1,362   

Customer relationships

     338   
        

Total intangible assets acquired

     1,700   
        

Total assets acquired

   $ 5,092   
        

The fair value of the purchase consideration at the time of the acquisition was $5.1 million, which consisted of deferred payments to Zygo for inventory and fixed assets, as well as future royalty and sustaining engineering support fees. The future royalty and sustaining engineering support fees are considered contingent consideration. On the acquisition date, the consideration was recorded as a liability on the Company’s consolidated balance sheet at January 2, 2010, with $3.1 million being recorded as a current liability and $2.0 million being recorded as a long term liability.

 

55


Table of Contents

The Company was required to make payments to Zygo after each sale of the Company’s product which incorporates inventory acquired from Zygo. If the Company did not sell sufficient products that incorporate the acquired inventory from Zygo, within one year from the acquisition date, the Company was required to remit the remaining unpaid portion relating to inventory and fixed assets at that time. The purchase agreement also stipulated that if the Company received greater than $5.0 million in a financing transaction, 20% of the financing proceeds, not to exceed $2.0 million, must be paid to Zygo for any unpaid portion of the amounts related to inventory and fixed assets. In December 2009, the Company completed a common stock offering with net proceeds of $23.3 million, therefore, $2.0 million became immediately due and payable to Zygo. The $2.0 million payment was made to Zygo on January 7, 2010. In March 2010, the Company sold products that incorporate the acquired inventory from Zygo, at levels sufficient to trigger the Company’s payment obligations under the purchase agreement, and therefore, the remaining unpaid portion relating to inventory and fixed assets of $1.4 million became due and was paid by the Company to Zygo on April 15, 2010.

In addition, the Company agreed to pay Zygo a royalty based on net revenues of approved products and the expected sustaining engineering payments based on volumes of heads purchased from Zygo starting in 2010 and over a 10 year period. Our payments to Zygo Corporation over the next 10 years may be up to $6.8 million depending on the numbers of tools sold. For the year ended January 1, 2011, the Company made royalty and sustaining engineering payments of $0.1 million to Zygo. The fair value of the future royalty and sustaining engineering support fees was determined using a relief from royalty method based on the following: (a) the amount of the acquired assets that the business will generate, and (b) a discount rate of 20 percent, which was utilized to adjust the royalty and sustaining engineering payments to their present value, based on the consideration of both a weighted average cost of capital calculation and venture capital rates.

The fair value of inventory acquired from Zygo, which consisted of raw materials, was $2.0 million. Recent purchases by the Company of raw material were considered a reasonable proxy for fair value. The fair value of demonstration equipment was $1.4 million as determined by considering the purchase date and recent usage of the products. Fair value of developed technology of $1.4 million and customer relationships of $0.3 million were determined by a similar methodology to the methodology used above for calculating contingent consideration, with the following assumptions of (a) royalty rate of 3 percent, and (b) discount rate of 30 percent, and will be amortized over a period of 10 years on a straight-line basis and over a two years on an accelerated basis, respectively. Amortization expense of $0.3 million and $0.2 million was recorded for the acquired intangible assets from the Zygo transaction in fiscal years 2010 and 2009, respectively.

The acquired Zygo business contributed no revenues and a net loss of $1.8 million to the consolidated results of operations for the period from June 17, 2009 to January 2, 2010. The following unaudited pro forma summary presents consolidated information of Nanometrics as if the business combination had occurred at the beginning of fiscal year 2008 (in thousands):

 

     Pro Forma Year Ended  
     January 2,
2010
(unaudited)
    December 27,
2008
(unaudited)
 

Net revenues

   $ 78,864      $ 105,118   

Net income (loss)

     (20,095     (91,797

Net loss per share:

    

Basic

   $ (1.08   $ (4.95

Diluted

   $ (1.08   $ (4.95

 

56


Table of Contents

Note 4. Asset Held for Sale

In May 2009, the Company decided to close the Pyeongtek, South Korea manufacturing facility due to the prevailing industry and economic conditions facing the semiconductor industry at that time. The premises were vacated prior to the end of the second quarter 2009. The facility in South Korea met all the requirements as long-lived assets held for sale and the Company ceased recording depreciation on the facility. The fair value of the South Korean manufacturing facility was determined using a cost approach and a sale comparison approach. The cost approach uses the characteristics of the facility to determine the cost of replacement if the facility were new, adjusted for depreciation to date considering the age of the facility. The sale comparison approach considers market comparable sales activity. An average of the two approaches was used to determine the facility fair value of approximately $0.2 million, which included an estimate for selling costs at 10% of the building fair value. An impairment loss of $1.9 million was recorded on the South Korean facility for the second quarter of 2009. On April 29, 2010, the sale of the property was completed and a gain on the sale of $0.2 million was recorded in the second quarter of 2010.

Note 5. Stock-Based Compensation

The Company measured and recognized compensation expense for all share-based payment awards made to employees and directors including employee stock options and employee stock purchases related to the Employee Stock Purchase Plan (collectively “Employee Stock Purchases”) based on estimated fair values. The fair value of share-based payment awards is estimated on the date of grant using an option-pricing model. The value of the portion of the award that is ultimately expected to vest is recognized as expense over the requisite service periods in the Company’s consolidated statement of operations.

Stock-based compensation expense recognized during the period is based on the value of the portion of share-based payment awards that is ultimately expected to vest during the period. As stock-based compensation expense recognized in the consolidated statement of operations for the years ended January 1, 2011, January 2, 2010 and December 27, 2008 is based on awards ultimately expected to vest, it has been reduced for estimated forfeitures. ASC 740 requires forfeitures to be estimated at the time of grant and revised, if necessary, in subsequent periods if actual forfeitures differ from those estimates. The Company’s estimated forfeiture rate in 2010, 2009 and 2008 of 8.6%, 19.5% and 19.7%, respectively, was based on historical forfeiture experience, which the Company believes is the best available information to estimate the future forfeiture rate. Tax benefits resulting from tax deductions in excess of the compensation cost recognized for those options are required to be classified as financing cash flows. The Company recognized $0.8 million of excess tax benefit in the fiscal year 2010, there were no such tax benefits during fiscal 2009 and 2008.

Valuation and Expense Information

The fair value of stock-based awards to employees is calculated using the Black-Scholes option pricing model, even though this model was developed to estimate the fair value of freely tradable, fully transferable options without vesting restrictions, which differ significantly from the Company’s stock options. The Black-Scholes model requires subjective assumptions, including future stock price volatility and expected time to exercise, which greatly affect the calculated values. The expected term of options granted was calculated using the simplified method allowed by the SAB 107. The risk-free rate is based on the U.S Treasury rates in effect during the corresponding period of grant. The expected volatility is based on the historical volatility of Nanometrics’ stock price. These factors could change in the future, which would affect the stock-based compensation expense in future periods.

The weighted-average fair value of stock-based compensation to employees is based on the single option valuation approach. Forfeitures are estimated and it is assumed no dividends will be declared. The estimated fair value of stock-based compensation awards to employees is amortized over the vesting period of the options. The weighted-average fair value calculations are based on the following average assumptions:

 

     Fiscal Year
2010
    Fiscal Year
2009
    Fiscal Year
2008
 

Stock Options:

      

Expected life

     4.5 years        4.1 years        4.3 years   

Volatility

     74.2     67.6     56.9

Risk free interest rate

     2.04     2.08     2.22

Dividends

     —          —          —     

Employee Stock Purchase Plan:

      

Expected life

     0.5 years        0.5 years        0.5 years   

Volatility

     80.3     99.1     87.7

Risk free interest rate

     0.20     0.33     1.02

Dividends

     —          —          —     

 

57


Table of Contents

The weighted average fair value per share of the stock options awarded in fiscal years 2010, 2009 and 2008 is $6.42, $2.84 and $3.04, respectively.

The following table summarizes stock-based compensation expense for all share-based payment awards made to the Company’s employees and directors pursuant to the Employee Stock Purchases was allocated as follows (in thousands):

 

     Fiscal Year
2010
     Fiscal Year
2009
     Fiscal Year
2008
 

Cost of products

   $ 126       $ 34       $ 310   

Cost of service

     206         180         363   

Research and development

     514         495         696   

Selling

     596         472         751   

General and administrative

     1,508         873         1,761   
                          

Total stock-based compensation expense related to employee stock options and employee stock purchases

   $ 2,950       $ 2,054       $ 3,881   
                          

A summary of activity under the Company’s stock option plans during 2010 is as follows:

 

     Shares
Available for
Grant
(Options and
RSUs)
    Number of
Shares
Outstanding
(Options)
    Weighted
Average
Exercise
Price
     Weighted
Average
Remaining
Contractual
Term
(in Years)
     Aggregate
Intrinsic Value
(in Thousands)
 

Options

            

Outstanding at January 2, 2010

     1,773,229        2,953,294      $ 5.95         

Exercised

       (867,397     5.39         

Granted

     (805,968     805,968        10.92         

RSU allocation

     (73,232     —          —           

Canceled

     128,179        (128,179     8.88         
                              

Outstanding at January 1, 2011

     1,022,208        2,763,686      $ 7.43         5.2       $ 15,308   
                                          

Exercisable at January 1, 2011

       1,329,705      $ 7.05         4.6       $ 7,993   
                                    

The Company granted 73,232 and 62,000 Restricted Stock Units (“RSU”) during the year-end January 1, 2011 and January 2, 2010, respectively to key employees with vesting periods spanning from one to three years. A summary of activity for RSUs is as follows:

 

RSU

   Number
of RSU
    Weighted
Average Fair
Value
 

Outstanding RSU as of January 2, 2010

     83,330      $ 8.74   

Granted

     73,232      $ 10.70   

Released

     (73,255   $ 9.95   

Cancelled

     —       
          

Outstanding RSU as of January 1, 2011

     83,307      $ 9.98   
          

 

58


Table of Contents

Prior to December 2008, the majority of options granted by the Compensation Committee vested at a rate of 33 1/3 percent over the first three years of the seven-year option term on each of the first, second and third anniversary of such grants. Starting in December 2008, the majority of the options granted for employees employed for less than one year vest one-third (  1/3rd ) of the shares subject to the option on the first anniversary of the grant date, and vest one thirty sixth ( 1/36th ) each month for the following two years, for a total three year vesting period with a seven-year option term. Starting in November 2008, the majority of the options granted for employees employed for more than one year vest one thirty-sixth ( 1/36th ) of the shares subject to the options in equal monthly installments starting on the monthly anniversary of the date of grant with a seven-year option term.

The aggregate intrinsic value in the preceding table represents the total pretax intrinsic value, based on the Company’s closing stock price of $12.83 as of January 1, 2011, which would have been received by the option holders had all option holders exercised their options as of that date. The total intrinsic value of options exercised during 2010, 2009 and 2008 was $6.2 million, $2.2 million, and $0.1 million, respectively. The fair value of options vested during 2010, 2009 and 2008 was $2.8 million, $3.4 million and $6.3 million, respectively.

The following table summarizes significant ranges of outstanding and exercisable options as of January 1, 2011.

 

Exercise Prices

   Options Outstanding      Options Exercisable  
   Number
Outstanding
     Weighted Average
Remaining
Contractual Life
(Years)
     Weighted
Average
Exercise
Price
     Number
Exercisable
     Weighted
Average
Exercise
Price
 

$0.49–$0.49

     757         0.27       $ 0.49         757       $ 0.49   

$0.93–$0.93

     390,990         4.92       $ 0.93         199,153       $ 0.93   

$0.98–$2.38

     277,816         4.94       $ 1.49         121,520       $ 1.50   

$2.78–$6.80

     281,119         4.01       $ 5.68         174,205       $ 5.91   

$6.83–$7.47

     307,975         5.91       $ 7.35         261,744       $ 7.33   

$7.49–$8.89

     398,392         4.37       $ 8.10         255,410       $ 8.42   

$9.07–$10.37

     202,318         4.75       $ 9.57         97,010       $ 9.48   

$10.46–$10.46

     349,109         6.30       $ 10.46         46,500       $ 10.46   

$10.57–$11.82

     282,968         6.49       $ 11.36         13,354       $ 11.34   

$12.03–$20.14

     272,242         5.15       $ 14.23         160,052       $ 14.69   
                          

$0.49–$20.14

     2,763,686         5.20       $ 7.43         1,329,705       $ 7.05   
                          

As of January 1, 2011 the total unrecognized compensation costs related to unvested stock options was $5.0 million which is expected to be recognized as an expense over the weighted average remaining amortization period of 2.3 years.

In September 2009, the Company completed an offer to exchange certain employee stock options under Nanometrics’ Option Exchange Program (the “Option Exchange Program”). Under the Option Exchange Program, certain previously granted options were exchanged by eligible option holders for new options with a lower exercise price using the following exchange ratios: a) 2 replacement options were provided for every 3 options surrendered with an original exercise price less than or equal to $10.00, and b) 1 replacement option was provided for every 2 options surrendered with an original exercise price greater than $10.00.

 

59


Table of Contents

As a result of the Option Exchange Program, a total of 448,945 options to purchase shares of common stock were tendered for exchange, and 237,838 options to purchase shares of common stock were issued. A total of 103 employees participated in the Option Exchange Program. Options granted pursuant to the Option Exchange Program have an exercise price of $7.50 based on the NASDAQ closing price of the Company’s common stock on September 3, 2009. For options granted pursuant to the Option Exchange Program, one third vested immediately on the re-grant date, and the remaining two thirds will vest on a monthly basis beginning on the 13th month anniversary through the 36th month anniversary provided that the individual remains employed by the Company during that period. The incremental stock based compensation from the Option Exchange Program was $0.2 million which is being recorded ratably over the requisite service period of three years.

Note 6. Goodwill and Long-Lived Asset Impairment

Goodwill represents the excess of the purchase price paid over the fair value of tangible and identifiable intangible net assets acquired in a business combination. Goodwill is reviewed annually or whenever events or circumstances occur which indicate that goodwill might be impaired. A two-step approach is provided to determining whether and by how much goodwill has been impaired. The first step requires a comparison of the fair value of the Company’s reporting unitto its net book value. If the fair value is greater, then no impairment is deemed to have occurred. If the fair value is less, then the second step must be performed to determine the amount, if any, of actual impairment. The process of evaluating the potential impairment of goodwill is highly subjective and requires significant judgment. Prior to performing step one of the goodwill impairment testing process for a reporting unit, if there is reason to believe that other non-goodwill related intangible assets (finite or indefinite lived) and/or long-lived assets may be impaired, these other intangible assets and long-lived assets must first be tested for impairment. Assets require a recoverability test whereby the gross undiscounted cash flows are determined specific to the asset. If the sum of gross undiscounted cash flows for the fixed-life intangible asset or long-lived asset exceeds the carrying value of that asset, the test results in no impairment to the asset. If not, then the fair value of the asset must be determined and the impairment is measured by the differential between the fair value and the carrying value. For non-goodwill related indefinite-lived assets, a fair value determination is made. If the carrying value of the asset exceeds the fair value, then impairment occurs. The carrying values of these assets are impaired as necessary to provide the appropriate carrying value for the goodwill impairment calculation.

The process of evaluating the potential impairment of long-lived assets is highly subjective and requires significant judgment. In estimating the fair value of these assets, the Company made estimates and judgments about future revenues and cash flows. The Company’s forecasts were based on assumptions that are consistent with the plans and estimates the Company is using to manage the business. Changes in these estimates could change the Company’s conclusion regarding impairment of the long-lived assets and potentially result in future impairment charges for all or a portion of their balance at January 1, 2011.

Due to the decline in its forecasted revenues for certain product lines relating to specific intangible assets acquired in the 2006 acquisitions of Accent Optical Technologies, Inc. and Solaris, Inc., as well as the weakening conditions in the semiconductor equipment market, the Company determined that the net book value exceeded the undiscounted future cash flows for certain intangible assets. As a result of this analysis, in the second and third quarters of 2008 the Company recorded $13.1 million in impairment charges for intangible assets, of which $3.7 million was developed technology, $7.5 million was customer relationships, $1.6 million was brand names and $0.3 million was trade mark.

The Company also performed impairment tests for other long-lived assets such as property, plant and equipment during 2008. The Company performed an impairment analysis on its long-lived assets associated with its machine shop and plating facility, which was subcontracted in 2007, due to the significant reduction in forecasted future cash flows resulting from the operational limitations of the facility. Due to these reduced forecasts, the Company determined that the net book value exceeded the undiscounted future cash flows. As a result of this analysis, an impairment charge of $1.5 million was recorded in 2008 to reduce those assets to fair value.

In 2008, in estimating the fair value of the Company, the Company made estimates and judgments about future revenues and cash flows for each reporting unit. The Company’s estimates of market segment growth, market segment share and costs are based on historical data, various internal estimates and certain external sources, and are based on assumptions that are consistent with the plans and estimates it uses to manage the underlying businesses. The Company also considered its market capitalization on the dates of its impairment tests in determining the fair

 

60


Table of Contents

value of the respective businesses. The Company concluded that events had occurred and circumstances had changed during the third quarter of 2008 which might indicate the existence of impairment indicators including a significant decline in the Company’s stock price and continued deterioration in the semiconductor equipment market and the related impact on revenue forecasts of each reporting unit. Consistent with the Company’s approach in its annual impairment testing, in assessing the fair value of the reporting unit.

At September 27, 2008, the Company determined that the fair value of its reporting units was less than the net book value of the net assets of each reporting unit. The Company determined the implied fair value of the goodwill and compared it to the carrying value of the goodwill. With the assistance of a third party valuation firm, the Company allocated the fair value of the reporting units to all of its assets and liabilities as if the reporting unit had been acquired in a business combination and the fair value of the reporting units was the price paid to acquire the reporting unit. The excess of the fair value of the reporting unit over the amount assigned to its assets and liabilities is the implied fair value of goodwill. The Company’s analysis resulted in no implied fair value of goodwill, and therefore, the Company recognized an impairment charge of $54.0 million in the third quarter of 2008, representing a write-off of the entire amount of the Company’s previously recorded goodwill including goodwill from the Tevet acquisition which was a part of the impaired reporting units.

During the fiscal year 2010, the Company recorded $0.5 million of impairment related to certain software implementation projects that were abandoned, and in the fiscal year 2009, the Company recorded $1.9 million impairment to its manufacturing facility in South Korea.

Note 7. Sale of Accounts Receivable

The Company maintains arrangements under which eligible accounts receivable in Japan are sold without recourse to unrelated third-party financial institutions. These receivables were not included in the consolidated balance sheet as the criteria for sale treatment had been met. After a transfer of financial assets, an entity stops recognizing the financial assets when the control has been surrendered. The agreement met the criteria of a true sale of these assets since the acquiring party retained the title to these receivables and had assumed the risk that the receivables will be collectible. The Company pays administrative fees as well as interest ranging from 1.325% to 1.675% based on the anticipated length of time between the date the sale is consummated and the expected collection date of the receivables sold. In 2010, 2009 and 2008 there were no material gains or losses on the sale of such receivables. In 2010 and 2009, the Company sold $7.6 million and $6.5 million, respectively, of receivables under the terms of the agreement. There were no amounts due from the acquiring party financial institution at January 1, 2011 and January 2, 2010.

 

61


Table of Contents

Note 8. Inventories

Inventories consist of the following (in thousands):

 

     At  
     January 1,
2011
     January 2,
2010
 

Raw materials and sub-assemblies

   $ 22,352       $ 19,006   

Work in process

     10,295         4,286   

Finished goods

     10,521         8,180   
                 

Total inventories

   $ 43,168       $ 31,472   
                 

Note 9. Property, Plant and Equipment

Property, plant and equipment consist of the following (in thousands):

 

     At  
     January 1,
2011
    January 2,
2010
 

Land

   $ 15,570      $ 15,583   

Building and improvements

     18,829        18,575   

Machinery and equipment

     11,432        14,424   

Furniture and fixtures

     2,161        2,295   

Capital in progress

     2,669        1,850   
                
     50,661        52,727   

Accumulated depreciation and amortization

     (15,475     (16,362
                

Total property, plant and equipment, net

   $ 35,186      $ 36,365   
                

Depreciation expense was $4.4 million, $4.6 million and $4.9 million for 2010, 2009 and 2008, respectively. The amounts associated with capital in progress for 2010 and 2009 of $2.7 million and $1.9 million, respectively, were related to machinery and equipment projects.

Note 10. Intangible Assets

On June 17, 2009, Nanometrics announced that it had purchased inventory and certain other assets of Zygo Corporation and that the two companies have entered into a supply agreement. As a result, the Company recorded $1.4 million of developed technology and $0.3 million of customer relationships, during second quarter period of 2009. The Company will amortize the developed technology on a straight line basis over a period of ten years and the customer relationships on an accelerated basis over a period of two years from the date of acquisition.

Intangible assets with an indefinite life are evaluated annually for impairment or whenever events or circumstances occur which indicate that those assets might be impaired. As a result of the Company’s acquisition of Soluris Inc. during 2006, the Company acquired a trademark with a value of $0.4 million with an indefinite life. During 2008, the Company determined the trademark no longer had an indefinite life, a remaining life of five years was assigned, and the Company began amortizing the asset. Also, during 2008, the Company added $1.5 million of finite-lived intangible assets consisting of developed technology of $1.3 million and backlog of $0.2 million through its acquisition of Tevet.

 

62


Table of Contents

Finite-lived intangible assets are recorded at cost, less accumulated amortization. Finite-lived intangible assets as of January 2, 2010 and December 27, 2008 consist of the following (in thousands):

 

     Adjusted basis as of
January 2, 2010
     Additions
during 2010
at cost
     Adjusted basis as of
January 1, 2011
     Accumulated
amortization as of
January 1, 2011
    Net carrying
amount as of
January 1, 2011
 

Developed technology

   $ 8,681       $ —         $ 8,681       $ (4,794   $ 3,887   

Customer relationships

     8,521         —           8,521         (7,469     1,052   

Brand names

     1,927         —           1,927         (1,376     551   

Patented technology

     1,790         462        2,252         (1,790     462  

Trademark

     80         —           80         (60     20   
                                           

Total

   $ 20,999       $ 462       $ 21,461       $ (15,489   $ 5,972   
                                           

 

     Original
amount
     Adjusted basis as of
December 27, 2008
     Additions
during 2009
at cost
     Adjusted basis as of
January 2, 2010
     Accumulated
amortization as of
January 2, 2010
    Net carrying
amount as of
January 2, 2010
 

Developed technology

   $ 9,800       $ 7,319       $ 1,362       $ 8,681       $ (3,934   $ 4,747   

Customer relationships

     15,700         8,183         338         8,521         (6,924     1,597   

Brand names

     3,600         1,927         —           1,927         (1,232     695   

Patented technology

     1,790         1,790         —           1,790         (1,790     —     

Trademark

     400         80         —           80         (52     28   
                                                    

Total

   $ 31,290       $ 19,299       $ 1,700       $ 20,999       $ (13,932   $ 7,067   
                                                    

The amortization of finite-lived intangibles is computed using the straight-line method except for customer relationships which is computed using an accelerated method. Estimated lives of finite-lived intangibles range from five to ten years. Total amortization expense was $1.5 million, $1.5 million and $3.5 million for fiscal 2010, 2009 and 2008, respectively.

The estimated future amortization expense as of January 1, 2011 is as follows (in thousands):

 

Fiscal Years

   Amounts  

2011

   $ 1,426   

2012

     1,249   

2013

     1,091   

2014

     732   

2015

     660   

Thereafter

     814   
        

Total amortization

   $ 5,972   
        

Note 11. Other Current Liabilities

Other current liabilities consist of the following (in thousands):

 

     At  
     January 1,
2011
     January 2,
2010
 

Accrued warranty

   $ 3,129       $ 1,200   

Accrued professional services

     722         1,021   

Customer deposits

     397         1,601   

Fair value of deferred payments to Zygo Corporation related to acquisition

     750         3,655   

Other

     2,295         1,475   
                 

Total other current liabilities

   $ 7,293       $ 8,952   
                 

 

63


Table of Contents

A reconciliation of the changes to the Company’s warranty accrual for fiscal years 2010 and 2009 is as follows (in thousands):

 

     Years Ended  
     January 1,
2011
    January 2,
2010
 

Balance as of beginning of period

   $ 1,200      $ 2,075   

Accruals for warranties issued during the period

     5,008        1,429   

Aggregate changes in liabilities relating to existing warranties

     (238     10   

Settlements during the period

     (2,841     (2,314
                

Balance as of end of period

   $ 3,129      $ 1,200   
                

Note 12. Line of Credit and Debt Obligations

Debt obligations consist of the following (in thousands):

 

     January 1,
2011
    January 2,
2010
 

Line of Credit

    

Balance on line of credit

   $ —        $ —     

Debt Obligations

    

Milpitas building mortgage

     10,039        13,082   
                

Total debt obligations

     10,039        13,082   

Current portion of debt obligations

     (572     (343
                

Long-term debt obligations

   $ 9,467      $ 12,739   
                

In February 2007, the Company entered into a two-year agreement for a revolving line of credit facility in a maximum principal amount of $15.0 million. On April 30, 2009, Nanometrics re-negotiated its revolving line of credit facility to extend the maturity date of the facility by an additional two years, to April 30, 2011. On June 15, 2009, the Company amended the financial covenants governing the credit facility to reduce the net tangible net worth requirements, effective as of June 27, 2009. On April 13, 2010, the Company amended the revolving line of credit facility to (i) increase the maximum principal amount available there under from $15.0 million to $20.0 million, (ii) extend the maturity date of such facility by one year to April 30, 2012, and (iii) decrease the unused revolving line commitment fee from 0.25% per annum to 0.1875% per annum.

The instrument governing the facility includes certain financial covenants regarding net tangible net worth. The revolving line of credit agreement includes a provision for the issuance of commercial or standby letters of credit by the bank on behalf of the Company. The value of all letters of credit outstanding reduces the total line of credit available. The revolving line of credit is collateralized by a blanket lien on all of the Company’s domestic assets excluding intellectual property and real estate. The minimum borrowing interest rate is 5.75% per annum. The maximum borrowing allowed on the line of credit is $20.0 million. Borrowing is limited to the lesser of (a) $7.5 million plus the borrowing base or (b) $20.0 million. As of January 1, 2011, the Company was not in breach of any restrictive covenants in connection with its line of credit and debt obligations. There are no outstanding amounts drawn on this facility as of January 1, 2011. Although the Company has no current plans to request advances under this credit facility, it may use the proceeds of any future borrowing for general corporate purposes, future acquisitions or expansion of the Company’s business.

In July 2008, the Company entered into a mortgage agreement with General Electric Commercial Finance pursuant to which it borrowed $13.5 million. The mortgage initially bears interest at the rate of 7.18% per annum, which rate will be reset in August 2013 to 3.03% over the then weekly average yield of five-year U.S. Dollar Interest Rate Swaps as published by the Federal Reserve. Monthly principal and interest payments are based on a twenty year amortization for the first sixty months and fifteen year amortization thereafter. The remaining principal balance of the mortgage and any accrued but unpaid interest will be due on August 1, 2018. The mortgage is secured, in part, by a lien on and security interest in the building and land comprised of the Company’s principal offices in Milpitas, California.

 

64


Table of Contents

According to the terms of the loan agreement, the Company can make pre-payments of up to 20% of the outstanding principal balance without incurring any penalty. During the year 2010, in addition to the monthly principal and interest payments due under the agreement, the Company made a $2.6 million pre-payment towards the principal amount of the loan.

At January 1, 2011, future annual maturities of all debt obligations were as follows (in thousands):

 

         Amounts      

2011

   $ 1,283   

2012

     1,283   

2013

     1,087   

2014

     811   

2015

     811   

Thereafter

     8,430   
        

Total obligations

     13,705   

(less) Interest

     (3,666
        

Total loan amount

   $ 10,039   
        

 

65


Table of Contents

Note 13. Commitments and Contingencies

The Company leases facilities and certain equipment under non-cancellable operating leases. Rent expense, which is recorded on a straight-line basis over the term of the respective lease, for 2010, 2009 and 2008, was approximately $1.4 million, $1.4 million and $1.4 million, respectively. Future minimum lease payments under its operating leases are as follows (in thousands):

 

     Operating
Leases
 

2011

   $ 1,537   

2012

     1,134   

2013

     516   

2014

     384   

2015

     236   

Thereafter

     431   
        

Total

   $ 4,238   
        

In August 2005, KLA-Tencor Corporation (“KLA”), filed a complaint against the Company in the United States District Court for the Northern District of California. The complaint alleges that certain of the Company’s products infringe two of KLA’s patents. On January 30, 2006, KLA added a third patent to its complaint. The complaint seeks a preliminary and permanent injunction against the sale of these products as well as the recovery of monetary damages and attorneys’ fees. As part of its defense, the Company has filed requests for re-examinations of the allegedly infringed KLA patents with the U.S. Patent & Trademark Office (“PTO”). That is, the Company has requested that the PTO review the KLA patents to determine whether or not the patents should remain enforceable as written.

In March 2006, the Court stayed the patent litigation case until the re-examinations are completed. On November 4, 2008, the PTO issued an Ex Parte Reexamination Certificate (indicating completion of the reexamination process) on one of the three patents-in-suit. On December 8, 2009, the PTO issued an Ex Parte Reexamination Certificate for another of the KLA patents-in-suit. On September 21, 2009, while the reexamination of the third patent-in-suit was still pending, the Company filed a second request for re-examination relating to the third patent. On March 30, 2010, the PTO issued an Ex Parte Reexamination Certificate as to the first reexamination of the third patent. The second reexamination of the third patent remains pending, and the litigation remains stayed. In all four of the reexamination proceedings, the PTO has issued Office Actions rejecting numerous claims of KLA’s patents and KLA has amended the claims in response. The Company believes that it has meritorious defenses to the claims and plans to vigorously defend these lawsuits.

Note 14. Stockholders’ Equity

Preferred and Common Stock

The authorized capital stock of Nanometrics consists of 47,000,000 shares of common stock, par value $0.001 per share, and 3,000,000 shares of preferred stock, par value $0.001 per share.

During the fiscal year 2010, the Company repurchased and retired 161,492 shares of its common stock for a total consideration of $2.1 million, including 96,492 shared that were repurchased for $1.3 million and retired under a plan approved by its Board of Directors in the year 2007, and repurchased and retired 65,000 shares for $0.8 million under the 2010 plan approved by its Board of Directors.

In December 2009, the Company completed a public offering of its common stock resulting in the issuance of 2,307,152 shares at net proceeds of $23.3 million.

 

66


Table of Contents

Stock Option Plans

The Nanometrics option plans are as follows:

 

Plan Name

  

Participants

   Shares
Authorized
 

2005 Equity Incentive Plan

   Employees, consultants and directors      2,692,594   

2002 Non-statutory Stock Option Plan

   Employees and consultants      1,200,000   

2000 Employee Stock Option Plan

   Employees and consultants      2,450,000   

2000 Director Stock Option Plan

   Non-employee directors      250,000   

1991 Stock Option Plan

   Employees and consultants      3,000,000   

Accent Optical Technologies, Inc. Stock Incentive Plan

   Employees and consultants      205,003   

See Note 5 above for information on option activity in 2010.

Employee Stock Purchase Plan

Under the 2003 Employee Stock Purchase Plan (“ESPP”), eligible employees are allowed to have salary withholdings of up to 10% of their base compensation to purchase shares of common stock at a price equal to 85% of the lower of the market value of the stock at the beginning or end of each six-month offering period, subject to an annual limitation. At the end of the fiscal year ended January 1, 2011 Nanometrics had 0.9 million shares remaining for issuance under the ESPP. Shares issued under the ESPP were 56,326 shares, 352,356 shares, and 267,649 shares in 2010, 2009 and 2008 at a weighted average price of $8.88, $1.71 and $2.26, respectively. Of the ESPP purchases, 69,515 shares will be issued subsequent to end of fiscal year 2010.

Note 15. Restructuring Charge

In the first and second quarters of 2009, the Company reduced the global workforce by 51 and 25 employees, respectively, and recorded a restructuring charge of $0.7 million and $0.4 million in each respective quarter. Twelve (12) of the employees terminated in the second quarter of 2009 were in connection with the South Korea manufacturing facility closure.

 

     Severance
and Other
Benefits
    Total  

Reserve balance at December 27, 2008

   $ 80      $ 80   

Restructuring charges during 2009

     1,134        1,134   

Cash paid

     (1,214     (1,214
                

Reserve balance at January 2, 2010

   $ —        $ —     
                

During the first and third quarters of 2008, the Company reduced its global work force by approximately 30 and 34 employees, respectively. This reduction affected employees in each of the Company’s locations worldwide and was aimed at reducing its operating expenses.

 

     Severance
and Other
Benefits
    Other
Charges
    Total  

Reserve balance at December 29, 2007

   $ —        $ —        $ —     

Restructuring charges during 2008

     1,441        84        1,525   

Cash paid

     (1,361     (84     (1,445
                        

Reserve balance at December 27, 2008

   $ 80      $ —        $ 80   
                        

 

67


Table of Contents

Note 16. Defined Benefit Pension Plan

Nanometrics sponsors a statutory defined benefit pension plan (the “Benefit Plan”) in Taiwan for its local employees. The funded status of the Benefit Plan was as follows for the fiscal years ended January 1, 2011, January 2, 2010 and December 27, 2008 (in thousands):

Change in fair value of plan assets

 

     2010      2009      2008  

Fair value of plan assets at beginning of year

   $ 95       $ 78       $ 55   

Actual return on plan assets

     9         4         2   

Employer contributions

     13         13         21   
                          

Fair value of plan assets at end of year

   $ 117       $ 95       $ 78   
                          

Change in projected benefit obligations

 

     2010      2009     2008  

Projected benefit obligation at the beginning of the year

   $ 297       $ 560      $ 808   

Interest cost

     7         14        18   

Actuarial gain/loss

     94         (88     (15

Effects due to curtailment

     —           (189     (251
                         

Benefit obligation

   $ 398       $ 297      $ 560   
                         

Funding deficiency

   $ 281       $ 202      $ 482   
                         

The funding deficiency is reflected in other long-term liabilities on the balance sheet at January 1, 2011 and January 2, 2010, respectively. The accumulated benefit obligation as of January 1, 2011, January 2, 2010 and December 27, 2008 was $0.3 million, $0.2 million and $0.4 million, respectively.

The Company’s Pension Benefit Plan reflects a net loss of $0.1 million, a net gain of $0.1 million and a net gain of $0.2 million for the years ended January 1, 2011, January 2, 2010 and December 27, 2008, respectively. These have been included under other comprehensive income.

Pension Benefit Expense

Nanometrics’ net pension benefit cost (gain) were as follows for the years ended January 1, 2011, January 2, 2010, and December 27, 2008 (in thousands):

 

     2010     2009     2008  

Interest cost

   $ 7      $ 14      $ 18   

Amortization of transition obligation

     11        17        18   

Amortization of net loss

     (4     (2     (2

Expected return on plan assets

     (2     (2     (2

Curtailment or settlement (gain) loss

     —          (153     (146
                        

Net pension benefit cost (gain) for the year

   $ 12      $ (126   $ (114
                        

The weighted average assumptions used to calculate net benefit cost and obligations were as follows for the fiscal years ended January 1, 2011, January 2, 2010 and December 27, 2008 were:

 

     2010     2009     2008  

Average increase in compensation levels

     1.5     1.5     2.0

Discount rate

     2.0     2.3     2.5

Expected long-term returns on the assets

     2.0     2.0     2.5

As required by the law, the Company’s plan assets are deposited in Trust of Bank of Taiwan in the form of cash, where Trust of Bank of Taiwan is the assigned trustee for statutory retirement benefits. The expected long-term rate of return of assets for the plan reflects the expected returns for the bank accounts held with the government of Taiwan in which the plan invests.

 

68


Table of Contents

Note 17. Income Taxes

Income Tax Assets and Liabilities – The Company accounts for income taxes whereby deferred tax assets and liabilities must be recognized using enacted tax rates for the effect of temporary differences between the book and tax accounting for assets and liabilities. Also, deferred tax assets must be reduced by a valuation allowance to the extent that management concludes that it is more likely than not that a portion of the deferred tax asset will not be realized in the future. The Company evaluates the deferred tax assets on a continuous basis throughout the year to determine whether or not a valuation allowance is appropriate. Factors used in this determination include future expected income and the underlying asset or liability which generated the temporary tax difference. The income tax provision is primarily impacted by federal statutory rates, state and foreign income taxes and changes in the valuation allowance.

Income (loss) before provision (benefit) for income taxes consists of the following (in thousands):

 

     Years Ended  
     January 1,
2011
     January 2,
2010
    December 27,
2008
 

Domestic

   $ 37,640       $ (14,111   $ (69,860

Foreign

     3,049         (2,780     (12,430
                         

Income (loss) before income taxes

   $ 40,689       $ (16,891   $ (82,290
                         

The provision (benefit) for income taxes consists of the following (in thousands):

 

     Years Ended  
     January 1,
2011
    January 2,
2010
    December 27,
2008
 

Current:

      

Federal

   $ 2,031      $ (75   $ (127

State

     659        6        72   

Foreign

     55        (111     1,238   
                        
     2,745        (180     1,183   
                        

Deferred:

      

Federal

     (14,266     —          (238

State

     (459     —          —     

Foreign

     (3,279     (406     (509
                        
     (18,004     (406     (747
                        

Provision (benefit) for income taxes

   $ (15,259   $ (586   $ 436   
                        

 

69


Table of Contents

Significant components of the Company’s deferred tax assets and liabilities are as follows (in thousands):

 

     At  
     January 1,
2011
    January 2,
2010
 

Deferred tax assets/(liabilities) - current:

    

Reserves and accruals not currently deductible

   $ 9,625      $ 7,079   

Deferred revenue

     338        127   

Other

     592        554   
                

Total net deferred tax assets/(liabilities) - current

     10,555        7,760   

Valuation allowance

     (911     (7,515
                

Total net deferred tax assets/(liabilities) – current

   $ 9,644      $ 245   
                

Deferred tax assets (liabilities) noncurrent:

    

Reserves and accruals

   $ —        $ 188   

Goodwill

     825        354   

Shared based compensation

     2,411        1,902   

Tax credit carry-forwards

     2,819        8,180   

Net operating losses

     7,220        19,209   

Depreciation and amortization

     2,477        2,392   

Other

     (405     17   
                

Total net deferred tax assets (liabilities) - noncurrent

     15,347        32,242   

Valuation allowance

     (6,091     (31,630
                

Total net deferred tax assets/(liabilities) - noncurrent

   $ 9,256      $ 612   
                

As of January 1, 2011, the Company had net operating loss carryforwards of $25.7 million in California and $23.8 million in foreign countries, which begin to expire in 2013 and 2012, respectively. A total of $1.6 million of the California net operating loss carryforward and $0.7 million of the foreign net operating loss carryforwards are related to excess tax benefits as a result of stock option exercises and therefore will be recorded in additional paid-in-capital in the period that they become realized. During the year ended January 1, 2011, the Company realized excess benefits as a result of stock option exercises in the amount of $0.8 million, and was appropriately recorded to additional paid-in-capital.

As of January 1, 2011, the Company had available for carryforward research and experimental tax credits, minimum tax credits and foreign tax credits for federal income tax purposes of $3.3 million, $0.3 million, and $0.4 million, respectively. Federal credit carryforwards will begin to expire in 2020. A total of $1.1 million and $0.4 million of the federal research and experimental tax credits and foreign tax credits, respectively, are related to excess tax benefits as a result of stock option exercises and therefore will be recorded to additional paid-in-captial in the period that they become realized.

As of January 1, 2011, the Company had available for carryforward state research and experimental tax credits and other credits of $2 million. State research and experimental tax credits carryforward indefinitely. A total of $0.2 million of the state research and experimental tax credits are related to excess tax benefits as a result of stock option exercises and therefore will be recorded to additional paid-in-captial in the period that they become realized.

During the years ended January 1, 2011 and January 2, 2010 the valuation allowance decreased by $32.1 million and increased by $4.2 million, respectively. Due to improvements in the Company’s operations and industry’s forecast and after considering all positive and negative evidence, the Company now believes it is more likely than not that the Company will utilize certain deferred tax assets. As a result, the Company released $18.2 million of its income tax valuation allowance. The valuation allowance decreased in 2010 due to the release of valuation allowance against federal, state, and foreign deferred assets predominately in the U.S. and Japan as the Company expects to realize its net operating loss and tax credits carryforwards.

 

70


Table of Contents

Changes in tax laws and tax rates could affect our recorded deferred tax assets and liabilities in the future. Our tax liabilities involve dealing with uncertainties in the application of complex tax laws and regulations in a multitude of jurisdictions across our global operations. Management will account for any such changes or factors in the period in which such law changes are enacted.

Differences between income taxes computed by applying the statutory federal income tax rate to income before income taxes and the provision (benefit) for income taxes consist of the following (in thousands):

 

     Years Ended  
     January 1,
2011
    January 2,
2010
    December 27,
2008
 

Income taxes computed at U.S. statutory rate

   $ 14,241      $ (5,912   $ (28,804

State income taxes

     2,080        6        72   

Foreign tax rate differential

     (3,512     (229     4,647   

Change in valuation allowance

     (28,825     4,237        4,683   

Tax credits

     (952     927        (83

Goodwill impairment

     —          —          18,294   

ASC 740-10 Liabilities

     1,793        (207     457   

Other, net

     (84     592        1,170   
                        

Provision (benefit) for income taxes

   $ (15,259   $ (586   $ 436   
                        

Undistributed earnings that were not previously taxed amount to $0.3 million as of January 1, 2011.

In July 2006, the FASB issued FASB Interpretation No. 48, “Accounting for Uncertainty in Income Taxes—an interpretation of FASB Statement No. 109” which has subsequently been codified in ASC 740-10. ASC 740-10 prescribes a comprehensive framework for the financial statement recognition, measurement, presentation, and disclosure of uncertain income tax positions that the Company has taken or anticipates taking on a tax return, and includes guidance on de-recognition, classification, interest and penalties, accounting in interim periods, and transition rules. The Company adopted ASC 740-10 effective January 1, 2007.

We recognize tax liabilities for uncertain tax positions and adjust these liabilities when our judgment changes as a result of the evaluation of new information not previously available. Due to the complexity of some of these uncertainties, the ultimate resolution may result in a payment that is materially different from our current estimate of the tax liabilities. These differences will be reflected as increases or decreases to income tax expense in the period in which they are determined. The Company does not expect a material change in its unrecognized tax benefits within the next 12 months.

The accounting for uncertainty in income taxes recognized in an enterprise’s financial statements prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken on a tax return, and the derecognition of tax benefits, classification on the balance sheet, interest and penalties, accounting in interim periods, disclosure, and transition.

 

71


Table of Contents

A reconciliation of the beginning and ending amount of unrecognized tax benefits is as follows (in thousands):

 

     Rollforward Table (at Gross): As of  
     January 1,
2011
    January 2,
2010
    December 27,
2008
 

Unrecognized tax benefits – beginning of the period

   $ 1,032      $ 1,374      $ 343   

Foreign Currency Movements

     (15     —          —     

Gross increases – tax positions in prior period

     1,971        15        835   

Gross decreases – tax positions in prior period

     —          (345     —     

Gross increases – current-period tax positions

     530        81        296   

Settlements

     —          —          —     

Lapse of statute of limitations

     (148     (93     (100
                        

Unrecognized tax benefits – end of the period

   $ 3,370      $ 1,032      $ 1,374   
                        

The unrecognized tax benefits at January 1, 2011 will impact the effective tax rate if the company elected to recognize these tax benefits. The Company accrues interest and penalties related to unrecognized tax benefits in its provision for income taxes. The total amount of penalties and interest is not material as of January 1, 2011, January 2, 2010 and December 27, 2008. The Company does not expect a material change in its unrecognized tax benefits within the next 12 months.

The Company is subject to taxation in the US and various states including California, and foreign jurisdictions including Korea, Japan and United Kingdom. Due to tax attribute carry-forwards, the Company is subject to examination for tax years 2004 forward for U.S. tax purposes. The Company was also subject to examination in various states for tax years 2004 forward. The Company is subject to examination for tax years 2004 forward for various foreign jurisdictions.

Note 18. Major Customers

The following customers accounted for 10% or more of total revenue:

 

     Years Ended  
     January 1,
2011
    January 2,
2010
    December 27,
2008
 

Samsung Electronics Co. Ltd.

     23.0     33.4     16.1

Intel Corporation

     16.4     10.4     * ** 

Hynix Semiconductor, Inc.

     12.8     * **      * ** 

Toshiba Semiconductor

     * **      * **      11.0

 

*** The customer accounted for less than 10% of revenue during the period.

The following customers accounted for 10% or more of total accounts receivable:

 

     At  
     January 1,
2011
    January 2,
2010
 

Samsung Electronics Co. Ltd.

     19.2     30.5

Intel Corporation

     * **      16.1

Hynix Semiconductor, Inc.

     * **      12.7

 

*** The customer accounted for less than 10% of accounts receivable during the period.

 

72


Table of Contents

Note 19. Product, Segment and Geographic Information

The Company has one operating segment, which is the sale, design, manufacture, marketing and support of thin film, optical critical dimension and overlay dimension metrology systems. The Chief Executive Officer has been identified as the Chief Operating Decision Maker (“CODM”) because he has the final authority over resource allocation decisions and performance assessment. The CODM does not receive discrete financial information about individual components of the Company’s business. For the years ended January 1, 2011, January 2, 2010 and December 27, 2008, the Company recorded revenue from customers primarily in the United States, Asia and Europe. The following table summarizes total net revenues and long-lived assets (excluding intangible assets) attributed to significant countries (in thousands):

 

     Years Ended  
     January 1,
2011
     January 2,
2010
     December 27,
2008
 

Total net revenues:

        

United States

   $ 65,099       $ 22,755       $ 30,102   

South Korea

     54,156         29,992         20,944   

Japan

     19,776         11,293         28,572   

China

     17,532         3,157         7,470   

Taiwan

     15,990         3,615         5,871   

Europe

     7,119         3,868         5,315   

All other

     8,393         2,027         3,827   
                          

Total net revenues*

   $ 188,065       $ 76,707       $ 102,101   
                          

 

* Net revenues are attributed to countries based on the customer’s deployment and service locations of systems.

 

     At  
     January 1,
2011
     January 2,
2010
 

Long-lived tangible assets:

     

United States

   $ 33,377       $ 34,252   

Europe

     915         1,450   

South Korea

     1,229         1,148   

Japan

     518         819   

Taiwan

     60         66   

China

     28         12   

All other

     294         177   
                 

Total long-lived assets

   $ 36,421       $ 37,924   
                 

The Company’s product lines differ primarily based on the environment in which the systems will be used. Automated systems are used primarily in high-volume production environments. Materials characterization products are primarily used to measure the composition, band gap, structure, and other physical and electrical properties of semiconducting materials for high brightness LED and solar/photovoltaic structures in both development and high volume environments. Integrated systems are installed inside wafer processing equipment to provide near real-time measurements for improving process control and increasing throughput. Revenues by product type were as follows (in thousands):

 

     Years Ended  
     January 1,
2011
     January 2,
2010
     December 27,
2008
 

Automated Systems

   $ 110,955       $ 36,554       $ 40,623   

Integrated Systems

     17,437         2,767         15,964   

Materials Characterization

     26,156         9,832         19,009   
                          

Total product revenues

   $ 154,548       $ 49,153       $ 75,596   
                          

 

73


Table of Contents

SUPPLEMENTAL FINANCIAL INFORMATION

Selected Quarterly Financial Results (Unaudited)

The following table sets forth selected consolidated quarterly results of operations for the year ended January 1, 2011, January 2, 2010 and December 27, 2008 (in thousands, except per share amounts):

 

     Quarters Ended  
     Jan. 1,
2011
     Oct. 2,
2010
     July 3,
2010
     Apr. 3,
2010
 

Total net revenues

   $ 46,130       $ 53,935       $ 50,835       $ 37,165   

Gross profit

     24,303         29,397         28,006         20,547   

Income (loss) from operations

     8,668         13,818         12,892         5,946   

Net income (loss)

     26,129         12,327         11,567         5,925   

Net income (loss) per share:

           

Basic

   $ 1.18       $ 0.56       $ 0.53       $ 0.28   

Diluted

   $ 1.12       $ 0.53       $ 0.51       $ 0.26   

Shares used in per share computations:

           

Basic

     22,235         21,978         21,672         21,537   

Diluted

     23,323         23,168         22,847         22,655   

 

     Quarters Ended  
     Jan. 2,
2010
    Sept. 26,
2009
     June 27,
2009
    March 28,
2009
 

Total net revenues

   $ 26,319      $ 25,814       $ 14,517      $ 10,057   

Gross profit

     13,335        13,933         6,007        2,846   

Income (loss) from operations

     665        1,489         (6,475     (9,038

Net income (loss)

     (282     1,571         (6,965     (10,628

Net income (loss) per share:

         

Basic

   $ (0.01   $ 0.08       $ (0.38   $ (0.58

Diluted

   $ (0.01   $ 0.08       $ (0.38   $ (0.58

Shares used in per share computations:

         

Basic

     19,017        18,598         18,526        18,415   

Diluted

     19,017        19,398         18,526        18,415   

* * * * *

 

74


Table of Contents
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.

 

ITEM 9A. CONTROLS AND PROCEDURES

Attached as exhibits, to this Annual Report, are certifications of the Chief Executive Officer (“CEO”) and the Chief Financial Officer (“CFO”) required in accordance with Rule 13a-14 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). This Controls and Procedures section includes the information concerning the controls evaluation referred to in the certifications and it should be read in conjunction with the certifications for a more complete understanding of the topics presented.

Evaluation of Disclosure Controls and Procedures

We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our reports under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and that such information is accumulated and communicated to management, including our CEO and CFO, as appropriate, to allow timely decisions regarding required disclosure. Our management, with participation of our CEO and CFO, has evaluated the effectiveness of the Company’s disclosure controls and procedures as of the end of the fiscal year covered by this Annual Report on Form 10-K.

As described below under “Report of Management on Internal Control over Financial Reporting”, based upon that evaluation, our CEO and CFO have concluded that, as of the end of the period covered in this report, our disclosure controls and procedures were effective to ensure that information required to be disclosed by us in reports that we file or submit under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in Securities and Exchange Commission rules and forms and is accumulated and communicated to our management, including our principal executive officer and principal financial officer, as appropriate, to allow timely decisions regarding required disclosure.

 

75


Table of Contents

Report of Management on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act. Our internal control over financial reporting was designed to provide reasonable, not absolute, assurance regarding the integrity, reliability and fair presentation of our financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.

Internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of the assets of the Company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the Company’s assets that could have a material effect on the financial statements.

A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. Further, the design of a control system must reflect the fact that there are resource constraints. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within our company have been detected. Under the supervision and with the participation of our management, including our CEO and CFO, we assessed the effectiveness of our internal control over financial reporting as of January 1, 2011. In making this assessment, we used the criteria established in the framework on Internal Control – Integrated Framework issued by the Committee of Sponsoring Organizations (“COSO”) of the Treadway Commission.

Based on our assessment, which was conducted according to the COSO criteria, we have concluded that our internal control over financial reporting was effective in achieving its objectives as of January 1, 2011.

The effectiveness of our internal control over financial reporting as of January 1, 2011 has been audited by PricewaterhouseCoopers LLP, an independent registered public accounting firm, as stated in their report which appears herein.

Changes in Internal Control over Financial Reporting

No change in our internal controls over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) occurred during the fourth quarter ended January 1, 2011, that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

 

ITEM 9B. OTHER INFORMATION

None.

 

76


Table of Contents

PART III

 

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

The information required by this Item concerning our directors, compliance with Section 16 of the Securities and Exchange Act of 1934, our code of ethics that applies to our principal executive officer, principal financial officer and principal accounting officer and our Audit Committee is incorporated by reference to the information set forth in the sections entitled “Proposal One—Election of Directors,” “Section 16(a) Beneficial Ownership Reporting Compliance” and “Corporate Governance” in our Proxy Statement for our 2011 Annual Meeting of Stockholders to be filed with the Securities and Exchange Commission not later than 120 days after the end of our fiscal year (the “Proxy Statement”). Information regarding the Registrant’s executive officers is set forth at the end of Part I of this Annual Report on Form 10-K under the caption “Executive Officers of the Registrant.”

 

ITEM 11. EXECUTIVE COMPENSATION

Information required by this Item is incorporated by reference to the information set forth under the caption “Executive Compensation” in the Proxy Statement.

 

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

Information required by this Item is incorporated by reference to the information set forth under the sections entitled “Security Ownership of Beneficial Owners and Management” and “Equity Compensation Plan Information” in the Proxy Statement.

 

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS AND DIRECTOR INDEPENDENCE

Information required by this Item is incorporated by reference to the information set forth under the caption “Certain Relationships and Related Transactions” and “Corporate Governance” in the Proxy Statement.

 

ITEM 14. PRINCIPAL ACCOUNTING FEES AND SERVICES

The information required by this Item is incorporated by reference to the section entitled “Ratification of Appointment of Independent Registered Public Accounting Firm—Accounting Fees” in the Proxy Statement.

 

77


Table of Contents

PART IV

 

ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULE

 

(a) The following documents are filed as part of this report on Form 10-K:

 

  (1) Consolidated Financial Statements.

See Index to Consolidated Financial Statements on Item 8 on page 34 of this Annual Report on Form 10-K.

 

  (2) Consolidated Financial Statement Schedule.

The following consolidated financial statement schedule of Nanometrics Incorporated is filed as part of this Annual Report on Form 10-K and should be read in conjunction with the Consolidated Financial Statements:

 

Schedule

   Page  

(a) II – Valuation and Qualifying Accounts as of and for the year ended January 1, 2011

     83   

(b) II – Valuation and Qualifying Accounts as of January 2, 2010 and December  27, 2008 and for the years then ended

     83   

Schedules not listed above have been omitted because they are not applicable or are not required or the information required to be set forth therein is included in the Consolidated Financial Statements or notes thereto.

 

  (3) Exhibits.

See Exhibit Index beginning on page 74 of this Annual Report on Form 10-K.

 

78


Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Dated: March 11, 2011

 

NANOMETRICS INCORPORATED
By:  

/S/ TIMOTHY J. STULTZ

 

Timothy J. Stultz

President and Chief Executive Officer

(Duly Authorized Officer and Principal Executive Officer)

Pursuant to the requirements of the Securities Exchange Act of 1934, this Report on Form 10-K has been signed below by the following persons in the capacities and on the dates indicated.

 

Signature

  

Title

 

Date

/S/ TIMOTHY J. STULTZ

Timothy J. Stultz

  

President, Chief Executive Officer and Director

(Principal Executive Officer)

  March 11, 2011

/S/ JAMES P. MONIZ

James P. Moniz

  

Chief Financial Officer

(Principal Financial Officer and Principal Accounting Officer)

  March 11, 2011

/S/ BRUCE C. RHINE

Bruce C. Rhine

   Chairman of the Board of Directors   March 11, 2011

/S/ HOWARD A. BAIN III

Howard A. Bain III

   Director   March 11, 2011

/S/ J. THOMAS BENTLEY

J. Thomas Bentley

   Director   March 11, 2011

/S/ NORMAN COATES

Norman Coates

   Director   March 11, 2011

/S/ WILLIAM G. OLDHAM

William G. Oldham

   Director   March 11, 2011

/S/ STEPHEN J. SMITH

Stephen J. Smith

   Director   March 11, 2011

 

79


Table of Contents

EXHIBIT INDEX

 

Exhibit No.

  

Description

3.(i)

   Certificate of Incorporation

3.1(1)

   Certificate of Incorporation of the Registrant

3.(ii)

   Bylaws

3.2(1)

   Bylaws of the Registrant

4

   Instruments Defining the Rights of Security Holders, Including Indentures

4.1(2)

   Form of Common Stock Certificate

10

   Material Contracts
   Management Contracts, Compensatory Plans, Contracts or Arrangements

10.1(3)

   Form of Indemnification Agreement between the Registrant and each of its directors and executive officers

10.2(4)

   Registrant’s 1991 Stock Option Plan, as amended effective May 15, 1997, and form of Stock Option Agreement

10.3(5)

   Registrant’s 2000 Employee Stock Option Plan and form of Stock Option Agreement

10.4(6)

   Registrant’s 2000 Director Stock Option Plan and form of Stock Option Agreement

10.5(7)

   Registrant’s 2002 Non-statutory Stock Option Plan and form of Stock Option Agreement

10.6(8)

   Registrant’s Amended and Restated 2003 Employee Stock Purchase Plan

10.7(9)

   Registrant’s Amended and Restated 2003 Employee Stock Purchase Plan form of Subscription Agreement

10.8(8)

   Registrant’s Amended and Restated 2005 Equity Incentive Plan

10.9(6)

   Registrant’s Amended and Restated 2005 Equity Incentive Plan forms of Stock Option and Restricted Stock Unit Agreements

10.10(10)

   2010 Executive Performance Bonus Plan

10.11(11)

   Form of Offer Letter to Timothy J. Stultz

10.12(11)

   Form of Executive Severance Agreement between the Registrant and Timothy J. Stultz

10.13(10)

  

Amended and Restated Executive Severance Agreement between the Registrant and Timothy J. Stultz, dated

February 23, 2010

10.14(11)

   Form of Relocation Agreement between the Registrant and Timothy J. Stultz

10.15(12)

   Form of Executive Severance Agreement between the Registrant and Bruce A. Crawford

10.16(10)

   Amended and Restated Executive Severance Agreement between the Registrant and Bruce A. Crawford, dated February 23, 2010

10.17(13)

   Form of Offer Letter to James P. Moniz

10.18(13)

   Form of Executive Severance Agreement between the Registrant and James P. Moniz

10.19(10)

   Amended and Restated Employment Agreement between the Registrant and James P. Moniz, dated February 23, 2010

10.20

   Form of Offer Letter to Ronald W. Kisling

10.21

   Employment Agreement between Registrant and Ronald W. Kisling, dated February 28, 2011
   All Other Material Contracts

10.22(7)

   Loan and Security Agreement effective as of February 14, 2007 by and between Comerica Bank, the Registrant, Accent Optical Technologies, Nanometrics, Inc. and Nanometrics IVS Division, Inc.

10.23(13)

   Notice of Extension of the Maturity Date of the Loan and Security Agreement, dated as of February 14, 2009

 

80


Table of Contents

10.24(14)

   First Amendment to the Loan and Security Agreement dated September 14, 2007

10.25(14)

   Second Amendment to the Loan and Security Agreement dated May 11, 2009, with an effective date of April 29, 2009

10.26(15)

   Third Amendment to the Loan and Security Agreement dated June 15, 2009

10.27(16)

   Fourth Amendment to the Loan and Security Agreement dated April 13, 2010

10.28(17)

   Security Agreement, Balloon Promissory Note, and Deed of Trust by and between GE Commercial Finance Business Property Corporation and the Registrant, each dated July 25, 2008

10.29(15)

   Asset Transfer Agreement by and between Zygo Corporation and the Registrant, dated June 17, 2009

10.30(15)

   Supply Agreement by and between Zygo Corporation and the Registrant dated June 17, 2009

14

   Code of Ethics

14.1(18)

   Registrant’s Code of Business Conduct and Ethics

21.1

   Subsidiaries

21.1

   Subsidiaries of the Registrant

23

   Consents of Experts and Counsel

23.1

   Consent of PricewaterhouseCoopers LLP Independent Registered Public Accounting Firm

23.2

   Consent of BDO USA, LLP (formerly known as BDO Siedman, LLP), Independent Registered Public Accounting Firm

31

   Rule 13a-14(a)/15d-14(a) Certifications

31.1(19)

   Certification of Timothy J. Stultz, principal executive officer of the Registrant, pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

31.2(19)

   Certification of James P. Moniz, principal financial officer and principal accounting officer of the Registrant, pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

32

   Section 1350 Certifications

32.1(20)

   Certification of Timothy J. Stultz, principal executive officer of the Registrant, and James P. Moniz, principal financial officer and principal accounting officer of the Registrant pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

(1) Incorporated by reference to exhibits filed with the Registrant’s Current Report on Form 8-K filed October 5, 2006.
(2) Incorporated by reference to Exhibit 4.1 filed with the Registrant’s Quarterly Report on Form 10-Q filed November 9, 2006.
(3) Incorporated by reference to Exhibit 10.1 filed with the Registrant’s Annual Report on Form 10-K filed March 15, 2007.
(4) Incorporated by reference to Exhibit 4.1 filed with the Registrant’s Registration Statement on Form S-8 (File No. 333-33583) filed on August 14, 1997.
(5) Incorporated by reference to Exhibit 4.2 filed with the Registrant’s Registration Statement on Form S-8 (File No. 333-40866) filed on July 6, 2000.
(6) Incorporated by reference to exhibits filed with the Registrant’s Annual Report on Form 10-K filed March 13, 2008.
(7) Incorporated by reference to exhibits filed with the Registrant’s Quarterly Report on Form 10-Q filed May 10, 2007.
(8) Incorporated by reference to the appendices filed with the Registrant’s definitive proxy statement on Schedule 14A filed April 21, 2009.
(9) Incorporated by reference to Exhibit 4.1 filed with the Registrant’s Registration Statement on Form S-8 (File No.333-108474) filed on September 3, 2003.

 

81


Table of Contents
(10) Incorporated by reference to exhibits filed with the Registrant’s Annual Report on Form 10-K filed on March 26, 2010.
(11) Incorporated by reference to exhibits filed with the Registrant’s Current Report on Form 8-K filed August 8, 2007.
(12) Incorporated by reference to Exhibit 10.1 filed with the Registrant’s Quarterly Report on Form 10-Q filed November 8, 2007.
(13) Incorporated by reference to exhibits filed with the Registrant’s Annual Report on Form 10-K filed on March 27, 2009.
(14) Incorporated by reference to exhibits filed with the Registrant’s Quarterly Report on Form 10-Q filed May 12, 2009.
(15) Incorporated by reference to exhibits filed with the Registrant’s Quarterly Report on Form 10-Q filed August 11, 2009.
(16) Incorporated by reference to Exhibit 99.1 filed with the Registrant’s Current Report on Form 8-K filed April 13, 2010.
(17) Incorporated by reference to Exhibit 10.2 filed with the Registrant’s Quarterly Report on Form 10-Q filed November 6, 2008.
(18) Incorporated by reference to Exhibit 14 filed with the Registrant’s Annual Report on Form 10-K filed April 1, 2004.
(19) Filed herewith.
(20) Furnished herewith.

 

82


Table of Contents

SCHEDULE II

NANOMETRICS INCORPORATED

(a) VALUATION AND QUALIFYING ACCOUNTS

Our allowance for doubtful accounts receivable consists of the following (in thousands):

 

Year Ended

   Balance at
beginning
of period
     Charged to
costs and
expenses
    Deductions –
write-offs of
accounts
     Balance
at end
of period
 

January 1, 2011

   $ 241       $ (131   $ 47       $ 63   

Our valuation allowance for deferred tax assets consists of the following (in thousands):

 

Year Ended

   Balance at
beginning
of period
     Charged to
costs and
expenses
    Deductions –
write-offs of
accounts
     Balance
at end
of period
 

January 1, 2011

   $ 39,145       $ (32,143   $ —         $ 7,002   

(b) VALUATION AND QUALIFYING ACCOUNTS

Our allowance for doubtful accounts receivable consists of the following (in thousands):

 

Year Ended

   Balance at
beginning
of period
     Charged to
costs and
expenses
     Deductions –
write-offs of
accounts
     Balance
at end
of period
 

January 2, 2010

   $ 309       $ 381       $ 449       $ 241   

December 27, 2008

   $ 323         —         $ 14       $ 309   

Our valuation allowance for deferred tax assets consists of the following (in thousands):

 

Year Ended

   Balance at
beginning
of period
     Charged to
costs and
expenses
    Deductions –
write-offs of
accounts
     Balance
at end
of period
 

January 2, 2010

   $ 34,902       $ 4,243      $ —        $ 39,145   

December 27, 2008

   $ 40,282         (5,380   $ —         $ 34,902   

 

83