Form 10-K

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

 

FORM 10-K

 

 

 

x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended September 30, 2010

or

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15 (d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from              to             

Commission file number 1-5978

SIFCO Industries, Inc.

(Exact name of registrant as specified in its charter)

 

Ohio

 

34-0553950

(State or other jurisdiction of incorporation or organization)   (I.R.S. Employer Identification No.)

970 East 64th Street, Cleveland Ohio

 

44103

(Address of principal executive offices)   (Zip Code)
                          (216) 881-8600                         
(Registrant’s telephone number, including area code)

Securities Registered Pursuant to Section 12(b) of the Act: Common Shares, $1 Par Value

 

NYSE AMEX

(Title of each class)   (Name of each exchange on which registered)

Securities registered pursuant to Section 12(g) of the Securities Exchange Act: None.

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Exchange Act.

Yes  ¨    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Securities Exchange Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ¨    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company (as defined in Rule 12b-2 of the Securities Exchange Act).

large accelerated filer  ¨        accelerated filer  ¨        non-accelerated filer  ¨        smaller reporting company  x

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes  ¨    No  x

The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold, as of the last business day of the registrant’s most recently completed second fiscal quarter is $56,346,363.

The number of the Registrant’s Common Shares outstanding at October 31, 2010 was 5,258,574.

Documents incorporated by reference: Portions of the definitive Proxy Statement for the Annual Meeting of Shareholders to be held on January 20, 2011 (Part III).

 

 

 


PART I

Item 1. Business

 

A. The Company

SIFCO Industries, Inc. (“SIFCO” or “Company”), an Ohio corporation, was incorporated in 1916. The executive offices of the Company are located at 970 East 64th Street, Cleveland, Ohio 44103, and its telephone number is (216) 881-8600.

The Company is engaged in the production and sale of a variety of metalworking processes, services and products produced primarily to the specific design requirements of its customers. The processes and services include forging, heat-treating, coating, welding, machining, and selective electrochemical finishing. The products include forged components, machined forged parts and other machined metal components, remanufactured component parts for aerospace turbine engines, and selective electrochemical finishing solutions and equipment. The Company’s operations are conducted in three business segments: (i) Aerospace Component Manufacturing Group, (ii) Turbine Component Services and Repair Group and (iii) Applied Surface Concepts Group.

 

B. Principal Products and Services

1. Aerospace Component Manufacturing Group

The Aerospace Component Manufacturing Group (“ACM Group”) has a single operation in Cleveland, Ohio. This segment of the Company’s business consists principally of the manufacture of forged components for aerospace applications. As a part of the ACM Group’s manufacturing process, the business performs forging, heat-treating and precision component machining.

Operations

The Company’s ACM Group is a manufacturer of forged components with capability ranging in size from 2 to 1,100 pounds (depending on configuration and alloy), primarily in various steel and titanium alloys, utilizing a variety of processes for applications principally in the aerospace industry. The ACM Group’s forged products include: original equipment manufacturers (“OEM”) and aftermarket components for aircraft and land-based turbine engines; structural airframe components; aircraft landing gear components; wheels and brakes; critical rotating components for helicopters; and commercial/industrial products. The ACM Group also provides heat-treatment, surface-treatment, non-destructive testing and select machining of forged components.

The ACM Group generally has multiple sources for its raw materials, which consist primarily of high quality metals essential to this business. Suppliers of such materials are located throughout North and South America and Europe. The ACM Group generally does not depend on a single source for the supply of its materials. Due to the scarcity of certain raw materials, some material is provided by a limited number of suppliers; however, the ACM Group believes that its sources are adequate for its business. The business is ISO 9001:2000 registered and AS 9100:2001 certified. In addition, the ACM Group’s chemical etching/milling, non-destructive testing, and heat-treating facilities are NADCAP (National Aerospace and Defense Contractors Accreditation Program) accredited.

Industry

The performance of the domestic and international air transport industry as well as government defense spending directly and significantly impact the performance of the ACM Group. The air transport industry’s long-term outlook is for continued, steady growth. Such outlook suggests the need for additional aircraft and, therefore, growth in the requirement for airframe and turbine engine components. After the more recent periods of negative operating results in the global commercial airline industry that was due in large part to the global economic downturn, the financial condition of the global commercial airline industry has improved. This improvement is due to strong demand in both air freight and passenger traffic resulting principally from improvements in both business and consumer confidence levels, which improvements can be attributed to the subsiding of the global economic downturn. The air transport industry has recently benefited from several favorable trends, including: (i) projected growth in air traffic, (ii) major replacement and refurbishment cycles driven by the desire for more fuel efficient aircraft and fleet commonality and (iii) relatively stable fuel prices. There has been recent improvement in aircraft capacity utilization due to the increase in air freight and passenger traffic, which is driving demand for additional capacity. Aircraft capacity is returning to the market at about the same pace as the growth in demand for such capacity. The ACM Group believes this pattern should continue with the long-term steady growth projected by the air transport industry. The ACM Group also supplies new and spare components for military aircraft, including helicopters. Military spending has continued to be strong and level in recent years. As a result of military initiatives, there has been continuing demand for both new and spare components for military customers. The ACM Group’s current outlook for the air transport industry is cautiously optimistic while the military segment remains

 

1


stable, yet subject to potential changes in defense spending decisions. It is difficult to determine at this time what the long-term impact of these factors may be on the demand for products provided by the ACM Group. Lack of continued improvement in the global economy could result in credit risk associated with serving the airlines and/or their suppliers. However, the ACM Group believes that it is poised to take advantage of improvement in order demand from the commercial airframe and engine manufacturers if and when it may occur.

Competition

While there has been some consolidation in the forging industry, the ACM Group believes there is limited opportunity to increase prices, other than for the pass-through of raw material steel and titanium alloys price increases. The ACM Group believes, however, that its demonstrated aerospace expertise along with focus on quality, customer service, SMART (Streamlined Manufacturing Activities to Reduce Time/Cost) initiatives, as well as offering a broad range of capabilities provide it with an advantage in the primary markets it serves. The ACM Group competes with both U.S. and non-U.S. suppliers of forgings, some of which are significantly larger than the ACM Group. As customers establish new facilities throughout the world, the ACM Group will continue to encounter non-U.S. competition. The ACM Group believes it can expand its markets by (i) broadening its product lines through investment in equipment that expands its manufacturing capabilities and (ii) developing new customers in markets whose participants require similar technical competence and service (as the aerospace industry) and are willing to pay a premium for quality.

Customers

During fiscal 2010, the ACM Group had two customers, various business units of Rolls-Royce Corporation and United Technologies Corporation, which accounted for 24% and 12%, respectively, of the ACM Group’s net sales. The net sales to these two customers, and the direct subcontractors to these two customers, accounted for 66% of the ACM Group’s net sales in fiscal 2010. The ACM Group believes that the loss of sales to such customers would result in a materially adverse impact on the business and income of the ACM Group. However, the ACM Group has maintained a business relationship with these customers for well over ten years and is currently conducting business with some of them under multi-year agreements. Although there is no assurance that this will continue, historically as one or more major customers have reduced their purchases, the ACM Group has generally been successful in replacing such reduced purchases, thereby avoiding a material adverse impact on the ACM Group. The ACM Group attempts to rely on its ability to adapt its services and operations to changing requirements of the market in general and its customers in particular. No material part of the ACM Group’s business is seasonal.

Backlog of Orders

The ACM Group’s backlog as of September 30, 2010 increased to $71.2 million, of which $55.0 million is scheduled for delivery during fiscal 2011, compared with $70.6 million as of September 30, 2009, of which $52.1 million was scheduled for delivery during fiscal 2010. All orders are subject to modification or cancellation by the customer with limited charges. Delivery lead times for certain raw materials (e.g. aerospace grades of steel and titanium alloy) continue to lengthen due to increased demand and the ACM Group believes that such lead time increase may ultimately result in a fundamental shift in the ordering pattern of its customers. The ACM Group believes that a likely consequence of such a shift is that customers may be placing orders further in advance than they more recently did, which may result in an increase, relative to comparable prior year periods, in the ACM Group’s backlog. Accordingly, such backlog increase, to the extent it may occur, is not necessarily indicative of actual sales expected for any succeeding period. Due principally to the overall weak global economic conditions and the related impact such conditions have continued to have on commercial aviation, the ACM Group continued to experience a decrease in fiscal 2010, in orders for products that principally support commercial aircraft.

2. Turbine Component Services and Repair Group

The Company’s Turbine Component Services and Repair Group (“Repair Group”) has a single operation in Minneapolis, Minnesota. This segment of the Company’s business consists principally of the repair and remanufacture of small aerospace turbine engine components. As a part of the repair and remanufacture process, the business performs precision component machining and applies high temperature-resistant coatings to turbine engine components.

Operations

The Repair Group requires the procurement of licenses/authority, which certifies that the Repair Group has obtained approval to perform certain proprietary repair processes. Such approvals are generally specific to an engine and its components, a repair process, and a repair facility/location. Without possession of such approvals, a company would be

 

2


precluded from competing in the aerospace turbine engine component repair business. Approvals are issued by either the original equipment manufacturers (“OEM”) of aerospace turbine engines or the Federal Aviation Administration (“FAA”).

In general, the Company considers aerospace turbine engines that (i) possess a thrust of less than 17,500 pounds and/or (ii) are used to power aircraft that carry fewer than 100 passengers, to be small aerospace turbine engines. Historically, the Repair Group has elected to procure approvals primarily from the OEMs and currently maintains proprietary repair process approvals issued by certain of the primary small engine OEMs (e.g. Pratt & Whitney Canada, Rolls-Royce, Turbomeca, and Hamilton Sundstrand). In exchange for being granted an OEM approval, the Repair Group is obligated, in most cases, to pay royalties to the OEM for each type of component repair that it performs utilizing the OEM-approved proprietary repair process. The Repair Group continues to be successful in procuring FAA repair process approvals. There is generally no royalty payment obligation associated with the use of a repair process approved by the FAA. To procure an OEM or FAA approval, the Repair Group is required to demonstrate its technical competence in the process of repairing such turbine engine components.

The development of remanufacturing and repair processes is an ordinary part of the Repair Group’s business. The Repair Group continues to invest time and money on research and development activities. The Company’s research and development activities in repair processes and high temperature-resistant coatings applied to super-alloy materials have applications in the small aerospace turbine engine markets. Operating costs related to such activities are expensed during the period in which they are incurred. The Repair Group’s research and development expense was $0.4 million in both fiscal 2010 and 2009.

The Repair Group generally has multiple sources for its raw materials, which consist primarily of investment castings and industrial coating materials essential to this business. Certain items are procured directly from the OEM, or from OEM-certified suppliers, to satisfy repair process requirements. Suppliers of such materials are located throughout North America and Europe. Although certain raw materials may be provided by a limited number of suppliers, the Repair Group generally does not depend on a single source for the supply of its materials and management believes that its sources are adequate for its business.

Industry

The performance of the air transport industry directly and significantly impacts the performance of the Repair Group. The air transport industry’s long-term outlook is for continued, steady growth. Such outlook suggests the need for additional aircraft and, therefore, growth in the requirement for aerospace turbine engines and related engine repairs. After the more recent periods of negative operating results in the global commercial airline industry that was due in large part to the global economic downturn, the financial condition of the global commercial airline industry has improved. This improvement is due to strong demand in both air freight and passenger traffic resulting principally from improvements in both business and consumer confidence levels, which improvements can be attributed to the subsiding of the global economic downturn. The air transport industry has recently benefited from several favorable trends, including: (i) projected growth in air traffic, (ii) the beginning of major replacement and refurbishment cycles driven by the desire for more fuel efficient aircraft and fleet commonality and (iii) relatively stable fuel prices. It is difficult to determine at this time what the long-term impact of these factors may be on air travel and the demand for products and services provided by the Repair Group. However, a lack of continued improvement in the global economy could result in further reduced demand for the products and services that the Repair Group provides. Management’s current outlook for the air transport industry continues to remain cautiously optimistic in the near term.

Competition

In recent years, while the absolute number of competitors has decreased as a result of industry consolidation and vertical integration, competition in the turbine engine component repair business has nevertheless increased, principally due to the increased direct involvement of the aerospace turbine engine manufacturers in the turbine engine overhaul and component repair businesses. With the presence of the OEMs in the market, there has been a general reluctance on the part of the OEMs to issue, to independent component repair companies, approvals for the repair of their newer model engines and related components. The Company believes that the Repair Group will, more likely than not, become more dependent in the future on (i) its ability to successfully procure and market FAA approved licenses and related repair processes and/or (ii) close collaboration with engine manufacturers.

Customers

The identity and ranking of the Repair Group’s principal customers can vary from year to year. The Repair Group attempts to rely on its ability to adapt its services and operations to changing requirements of the market in general and its customers in particular, rather than relying on high volume production of a particular item or group of items for a particular customer

 

3


or customers. During fiscal 2010, the Repair Group had three customers, consisting of various business units of Safran Group, United Technologies Corporation, and Rolls-Royce Corporation, which accounted for 29%, 24% and 17%, respectively, of the Repair Group’s net sales. Although there is no assurance that this will continue, historically as one or more major customers have reduced their purchases, the business has generally been successful in replacing such reduced purchases, thereby avoiding a material adverse impact on the business. No material part of the Repair Group’s business is seasonal.

Backlog of Orders

The Repair Group’s backlog as of September 30, 2010 decreased to $3.1 million, of which $1.8 million is scheduled for delivery during fiscal 2011 and $1.3 million is on hold, compared with $3.4 million as of September 30, 2009, of which $2.3 million was scheduled for delivery during fiscal 2010 and $1.1 million was on hold. All orders are subject to modification or cancellation by the customer with limited charges. The Repair Group believes that the backlog may not necessarily be indicative of actual sales for any succeeding period.

3. Applied Surface Concepts Group

The Company’s Applied Surface Concepts Group (“ASC Group”) provides surface enhancement technologies principally related to selective electrochemical finishing and anodizing. Principal product offerings include (i) the development, production and sale of metal plating solutions and equipment required for selective electrochemical finishing and (ii) providing selective electrochemical finishing contract services.

Operations

Selective electrochemical finishing of a component is done without the use of an immersion tank. A wide variety of pure metals and alloys, principally determined by the customer’s design requirements, can be used for applications including corrosion protection, wear resistance, anti-galling, increased lubricity, increased hardness, increased electrical conductivity, and re-sizing. SIFCO Process® metal solutions include: cadmium, cobalt, copper, nickel, tin and zinc. In addition, precious metal solutions such as gold, iridium, palladium, platinum, rhodium, and silver are also provided to customers. The ASC Group has also developed a number of alloy-plating solutions such as a nickel-cobalt solution that can be used as a more environmentally friendly replacement for a chromium plating solution, or a zinc-nickel solution that can be used as a more environmentally friendly replacement for a cadmium plating solution. In fiscal 2010, the ASC Group completed development of a new aluminum anodizing seal and a conversion coating solution as replacements for hexavalent chromium solutions.

The ASC Group can either (i) supply selective electrochemical finishing chemicals and equipment to customers desiring to perform selective electrochemical finishing in-house or (ii) provide manual or semi-automated contract selective electrochemical finishing services at either the customer’s site or at one of the Group’s facilities. The Group operates four U.S. facilities in geographic areas strategically located in proximity to its major customers (Cleveland, Ohio / Hartford, Connecticut / Norfolk, Virginia / Houston, Texas) and three in Europe (Birmingham, England / Paris, France / Rattvik, Sweden). The scope of selective electrochemical finishing work includes part salvage and repair, part refurbishment, and new part enhancement. Selective electrochemical finishing solutions are produced in the Cleveland, Ohio and Birmingham, England facilities.

The ASC Group generally has multiple sources for its raw materials, which consist primarily of industrial chemicals and metal salts and, therefore, does not depend on a single source for the supply of key raw materials. Management believes that its sources of raw materials are adequate to support its business.

The ASC Group maintains recognized industry brand names including: SIFCO Process®, Dalic®, USDL® and Selectron®, all of which are specified in military and industrial specifications. The ASC Group’s manufacturing operations have ISO 9001:2008 and AS 9100B certifications. In addition, two of its facilities are NADCAP (National Aerospace and Defense Contractors Accreditation Program) certified. Two of the service centers are FAA approved repair shops. Other ASC Group approvals include ABS (American Bureau of Ships), ARR (American Railroad Registry), JRS (Japan Registry of Shipping), and KRS (Korean Registry of Shipping).

Industry

Selective electrochemical finishing occupies a niche within the broader metal finishing industry. The ASC Group’s selective electrochemical finishing process is used to provide functional, engineered finishes rather than decorative finishes, and it serves many markets including aerospace, medical, electric power generation, and oil and gas. In its planning and

 

4


decision making processes, management of the ASC Group monitors and evaluates precious metal prices, global manufacturing activity, internal labor capacity, technological developments in surface enhancement, and the exploration and production activities relative to oil and gas products. The diversity of industries served helps to mitigate the impact of economic cycles on the ASC Group.

Competition

Although the Company believes that the ASC Group is the world’s largest selective electrochemical finishing company, there are several companies globally that manufacture and sell selective electrochemical finishing solutions and equipment and/or provide contract selective electrochemical finishing services. The ASC Group seeks to differentiate itself through its technical support and research and development capabilities. The ASC Group also competes with other surface enhancement technologies such as welding and metal spray.

Customers

The ASC Group has a customer base of over 1,000 customers. However, approximately 10 customers, who operate in a variety of industries, accounted for approximately 25% of the ASC Group’s fiscal 2010 net sales. No material part of the ASC Group’s business is seasonal.

Backlog of Orders

Due to the nature of its business (i.e. shorter lead times for its products and services) the ASC Group had no material backlog at September 30, 2010 and 2009.

4. General

For financial information concerning the Company’s reportable segments see Management’s Discussion and Analysis of Financial Condition and Results of Operations included in Item 7 and Note 12 to consolidated financial statements included in Item 8.

 

C. Environmental Regulations

In common with other companies engaged in similar businesses, the Company is required to comply with various laws and regulations relating to the protection of the environment. The costs of such compliance have not had, and are not presently expected to have, a material effect on the capital expenditures, earnings or competitive position of the Company and its subsidiaries under existing regulations and interpretations.

 

D. Employees

The number of the Company’s employees decreased from approximately 310 at the beginning of fiscal 2010 to approximately 300 employees at the end of fiscal 2010. The Company is party to a collective bargaining agreement with certain employees located at its ACM Group’s Cleveland, Ohio facility. The ACM Group’s union contract expires in May 2015 (effective since May 2010). The Company was also party to a collective bargaining agreement with certain employees located at its Repair Group’s Minneapolis, Minnesota facility that expired in July 2009 and was extended for 60 days until September 2009. As of September 30, 2010 the Repair Group is operating without a collective bargaining agreement. Management considers its relations with the Company’s employees to be good.

 

E. Non-U.S. Operations

The Company’s products and services are distributed and performed in U.S. as well as non-U.S. markets. The Company commenced its operations in the United Kingdom and France as a result of an acquisition of a business in 1992. The Company commenced its operations in Sweden as a result of an acquisition of a business in 2006. Wholly-owned subsidiaries operate the Company’s service and distribution facilities in the United Kingdom, France and Sweden.

Financial information about the Company’s U.S. and non-U.S. operations is set forth in Note 12 to the consolidated financial statements included in Item 8.

As of September 30, 2010, a portion of the Company’s cash and cash equivalents and short-term investments are in the possession of its non-U.S. subsidiaries and relate to undistributed earnings of these non-U.S. subsidiaries. Distributions

 

5


from the Company’s non-U.S. subsidiaries to the Company may be subject to statutory restrictions, adverse tax consequences or other limitations.

Item 2. Properties

The Company’s property, plant and equipment include the facilities described below and a substantial quantity of machinery and equipment, most of which consists of industry specific machinery and equipment using special jigs, tools and fixtures and in many instances having automatic control features and special adaptations. In general, the Company’s property, plant and equipment are in good operating condition, are well maintained and substantially all of its facilities are in regular use. The Company considers its investment in property, plant and equipment as of September 30, 2010 suitable and adequate given the current product offerings for the respective business segments’ operations in the current business environment. The square footage numbers set forth in the following paragraphs are approximations:

 

   

The Repair Group operates a single, owned facility in Minneapolis, Minnesota with a total of 59,000 square feet and is involved in the repair and remanufacture of small aerospace turbine engine components.

 

   

The ACM Group operates in a single, owned 240,000 square foot facility located in Cleveland, Ohio. This facility is also the site of the Company’s corporate headquarters.

 

   

The ASC Group is headquartered in an owned 34,000 square foot facility in Cleveland, Ohio. The Group leases space aggregating 52,000 square feet for sales offices and/or for its contract selective electrochemical finishing services in Norfolk, Virginia; Hartford, Connecticut; Houston, Texas; Paris, France; and Birmingham, England. The ASC Group also operates in an owned 3,000 square foot facility in Rattvik, Sweden.

 

   

The Company owns a building located in Cork, Ireland (59,000 square feet) that is subject to a long-term lease arrangement with the acquirer of the Repair Group’s industrial turbine engine component repair business that was sold in fiscal 2007.

Item 3. Legal Proceedings

In the normal course of business, the Company may be involved in ordinary, routine legal actions. The Company cannot reasonably estimate future costs, if any, related to these matters and does not believe any such matters are material to its financial condition or results of operations. The Company maintains various liability insurance coverages to protect its assets from losses arising out of or involving activities associated with ongoing and normal business operations; however, it is possible that the Company’s future operating results could be affected by future cost of litigation.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

The Company’s Common Shares are traded on the NYSE AMEX exchange (“NYSE AMEX”) under the symbol “SIF”. The following table sets forth, for the periods indicated, the high and low closing sales price for the Company’s Common Shares.

 

     Years Ended September 30,  
     2010      2009  
     High      Low      High      Low  

First Quarter

   $ 16.25       $ 13.18       $ 7.85       $ 4.10   

Second Quarter

     17.07         12.30         7.60         4.92   

Third Quarter

     17.25         10.11         11.37         5.94   

Fourth Quarter

     12.13         9.40         14.76         9.34   

Dividends and Shares Outstanding

The Company declared a special cash dividend of $0.15 per Common Share in fiscal 2010 but does not necessarily anticipate paying regular dividends on an annual basis in the future. The Company currently intends to retain all of its earnings for the operation and growth of its businesses. The Company’s ability to declare or pay cash dividends is limited by its credit agreement covenants. At October 31, 2010, there were approximately 664 shareholders of record of the Company’s Common Shares, as reported by Computershare, Inc., the Company’s Transfer Agent and Registrar, which maintains its U.S. corporate offices at 250 Royall Street, Canton, MA 02021.

 

6


Common Share Repurchase

During fiscal 2010, the Company invested $0.7 million to repurchase 66,093 common shares under a stock repurchase program initiated in June 2010, at which time the Company indicated that it was prepared to invest up to $1.0 million to repurchase its shares. The common shares were repurchased (i) during the period from June 7, 2010 through September 13, 2010, (ii) at a price range of $9.88 to $10.99 per share and (iii) at an average volume of 1,120 common shares per day transacted.

Reference Part III, Item 12. “Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters” for information related to the Company’s equity compensation plans.

Item 6. Selected Financial Data

The following table sets forth selected consolidated financial data of the Company. The data presented below should be read in conjunction with the audited consolidated financial statements and notes to consolidated financial statements included in Item 8.

 

     Years Ended September 30,  
     2010     2009     2008     2007     2006  
     (Amounts in thousands, except per share data)  

Statement of Operations Data

          

Net sales

   $ 83,270      $ 93,888      $ 101,391      $ 87,255      $ 68,606   

Income (loss) from continuing operations before income tax provision

     8,394        12,327        8,820        10,255        (35

Income tax provision

     3,032        4,480        3,277        1,483        14   

Income (loss) from continuing operations

     5,362        7,847        5,543        8,772        (49

Income (loss) from continuing operations per share (basic)

     1.01        1.48        1.05        1.67        (0.01

Income (loss) from continuing operations per share (diluted)

     1.00        1.47        1.04        1.66        (0.01

Income (loss) from discontinued operations, net of tax

            188        287        (2,044     1,009   

Net income

     5,362        8,035        5,830        6,728        960   

Net income per share (basic)

     1.01        1.52        1.10        1.28        0.18   

Net income per share (diluted)

     1.00        1.51        1.09        1.27        0.18   

Cash dividends per share

     0.15        0.10                        

Shares Outstanding at Year End

     5,259        5,298        5,295        5,281        5,222   

Balance Sheet Data

          

Working capital

   $ 35,632      $ 35,540      $ 34,315      $ 32,350      $ 15,011   

Property, plant and equipment, net

     20,749        16,940        10,253        10,570        14,059   

Total assets

     69,650        65,770        60,149        60,889        48,775   

Long-term debt, net of current maturities

     35        154        269        2,986        427   

Other long-term liabilities

     6,883        6,207        2,450        1,958        5,838   

Total shareholders’ equity

     48,039        45,245        40,679        36,778        25,183   

Shareholders’ equity per share

     9.13        8.54        7.68        6.96        4.82   

Financial Ratios

          

Return on beginning shareholders’ equity

     11.9     19.8     15.9     26.7     4.3

Long-term debt to equity percent

     0.1     0.3     0.7     8.1     1.7

Current ratio

     3.9        3.9        3.6        3.1        1.9   

 

7


Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

This Form 10-K, including Management’s Discussion and Analysis of Financial Condition and Results of Operations, may contain various forward-looking statements and includes assumptions concerning the Company’s operations, future results and prospects. These forward-looking statements are based on current expectations and are subject to risk and uncertainties. In connection with the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995, the Company provides this cautionary statement identifying important economic, political and technological factors, among others, the absence or effect of which could cause the actual results or events to differ materially from those set forth in or implied by the forward-looking statements and related assumptions. Such factors include the following: (1) the impact on business conditions, and on the demand for product in the aerospace industry in particular, of the global economic downturn, including the reduction in available capital and liquidity from banks and other providers of credit; (2) future business environment, including capital and consumer spending; (3) competitive factors, including the ability to replace business which may be lost; (4) successful development of turbine component repair processes and/or procurement of new repair process licenses from turbine engine manufacturers and/or the Federal Aviation Administration; (5) metals and commodities price increases and the Company’s ability to recover such price increases; (6) successful development and market introduction of new products and services (7) regressive pricing pressures on the Company’s products and services, with productivity improvements as the primary means to maintain margins; (8) continued reliance on consumer acceptance of regional and business aircraft powered by more fuel efficient turboprop engines; (9) continued reliance on military spending, in general, and/or several major customers, in particular, for revenues; (10) the impact on future contributions the Company’s defined benefit pension plans due to changes in actuarial assumptions, government regulations and the market value of plan assets; and (11) stable governments, business conditions, laws, regulations and taxes in economies where business is conducted.

The Company and its subsidiaries engage in the production and sale of a variety of metalworking processes, services and products produced primarily to the specific design requirements of its customers. The processes and services include forging, heat-treating, coating, welding, precision component machining, and selective electrochemical metal finishing. The products include forged components, machined forged components, other machined metal components, remanufactured component parts for turbine engines, and selective electrochemical finishing solutions and equipment. The Company’s operations are conducted in three business segments: (1) Aerospace Component Manufacturing Group, (2) Turbine Component Services and Repair Group, and (3) Applied Surface Concepts Group. The Company endeavors to plan and evaluate its businesses’ operations while taking into consideration certain factors including the following – (i) the projected build rate for commercial, business and military aircraft as well as the engines that power such aircraft, (ii) the projected maintenance, repair and overhaul schedules for commercial, business and military aircraft as well as the engines that power such aircraft, and (iii) anticipated exploration and production activities relative to oil and gas products, etc.

 

A. Results of Operations

1. Fiscal Year 2010 Compared with Fiscal Year 2009

Net sales in fiscal 2010 decreased 11.3% to $83.3 million, compared with $93.9 million in fiscal 2009. Income from continuing operations in fiscal 2010 was $5.4 million, compared with $7.8 million in fiscal 2009. Included in the $5.4 million of income from continuing operations in fiscal 2010 was LIFO expense of $0.2 million. Included in the $7.8 million of income from continuing operations in fiscal 2009 was LIFO income of $1.6 million. Income from discontinued operations, net of tax, was $0.2 million in fiscal 2009. Net income in fiscal 2010 was $5.4 million, compared with $8.0 million in fiscal 2009.

Aerospace Component Manufacturing Group (“ACM Group”)

Net sales in fiscal 2010 decreased 9.5% to $62.1 million, compared with $68.6 million in fiscal 2009. For purposes of the following discussion, the ACM Group considers aircraft that can accommodate less than 100 passengers to be small aircraft and those that can accommodate 100 or more passengers to be large aircraft. The ACM Group produces turbine engine components for small aircraft such as business and regional jets, military transport and surveillance aircraft. Turbine engine components are also produced for armored military vehicles powered by small turbine engines. Net sales comparative information for fiscal 2010 and 2009, respectively, is as follows:

 

8


 

     Year Ended
September 30,
     Increase
(Decrease)
 

Net Sales

   2010      2009     

Airframe components for small aircraft

   $ 36.3       $ 38.5       $ (2.2

Small turbine engine components

     20.7         21.0         (0.3

Airframe components for large aircraft

     3.4         4.6         (1.2

Turbine engine components for large aircraft

     0.8         2.2         (1.4

Commercial product sales and other revenue

     0.9         2.3         (1.4
                          

Total

   $ 62.1       $ 68.6       $ (6.5
                          

The decrease in net sales of airframe components for both small and large aircraft, as well as turbine engine components for large aircraft, during fiscal 2010, compared with fiscal 2009, is principally due to a decrease in the sales volumes of such components to customers. Such volume declines were caused by the overall weak global economic conditions that resulted in reduced build rates of commercial aircraft. The decrease in net sales of small turbine engine components during fiscal 2010, compared with fiscal 2009, is primarily attributable to declines in the production and delivery of armored military vehicles that are powered by small turbine engines. This decrease is partially offset by an increase in sales of turbine engine components for small aircraft such as military transport and surveillance aircraft. The decline in commercial product net sales is due to volume decline caused by the overall weak global economic conditions.

The ACM Group’s airframe and turbine engine component products have both military and commercial applications. Net sales of such components that solely have military applications were $33.9 million in fiscal 2010, compared with $35.0 million in fiscal 2009. Ongoing wartime demand, such as for additional military helicopters and related replacement components, is the primary driver of net sales of the components that have military applications, as well as net sales of components that have both military and commercial applications.

The ACM Group’s selling, general and administrative expenses decreased $0.1 million to $4.1 million, or 6.5% of net sales, in fiscal 2010, compared with $4.2 million, or 6.1% of net sales, in fiscal 2009. The decrease in selling, general and administrative expenses is principally due to (i) lower variable selling expenses as a result of both lower net sales and lower sales representative commission rates as well as (ii) lower expenses associated with uncollectible accounts receivable in fiscal 2010, compared with fiscal 2009. This was partially offset by higher employee incentive expense and consulting costs related to the implementation of a company-wide management information system.

The ACM Group’s operating income decreased $3.5 million to $9.9 million in fiscal 2010, compared with $13.4 million in fiscal 2009. The following is a comparison of operating income on both a LIFO and FIFO basis:

 

     Year Ended
September 30,
    Increase
(Decrease)
 

Operating Income

   2010      2009    

Operating income

   $ 9.9       $ 13.4      $ (3.5

LIFO expense (income)

     0.2         (1.6     1.8   
                         

Operating income without LIFO expense (income)

   $ 10.1       $ 11.8      $ (1.7
                         

Operating income was negatively impacted to a modest degree by the raw material component of manufacturing costs being approximately 40.4% of net sales in fiscal 2010, compared with 39.9% of net sales in fiscal 2009, due primarily to product mix.

Operating income in fiscal 2010, compared with fiscal 2009, was negatively impacted by lower production levels, due to lower net sales volumes. The lower production levels resulted in the ACM Group’s fixed manufacturing cost structure being allocated to fewer units of production resulting in higher per unit overhead expenses. This negative impact was partially offset by the following changes in certain other components of the ACM Group’s manufacturing expenditures in fiscal 2010, compared with fiscal 2009:

 

9


 

     Year Ended
September 30,
     Increase
(Decrease)
 

Manufacturing expenditures

   2010      2009     

Overhead:

        

Utilities

   $ 3.4       $ 4.2       $ (0.8

Repairs, maintenance and supplies

     2.7         3.1         (0.4

Depreciation

     1.0         0.8         0.2   

Tooling

     1.2         1.6         (0.4

Manufacturing costs benefited in fiscal 2010, compared with fiscal 2009, from (i) a 21.3% decline in the ACM Group’s price paid for natural gas as a result of global economic conditions, (ii) a 9.4% decline in the volume of natural gas consumed as a result of the aforementioned lower production levels, and (iii) a decrease in expenditures for repairs and maintenance and production supplies also due primarily to the lower production levels. Depreciation expense was higher in fiscal 2010, compared with fiscal 2009, due to the effect of recent capital expenditures for equipment.

Turbine Component Services and Repair Group (“Repair Group”)

During fiscal 2010, net sales, which consist principally of component repair services (including precision component machining and industrial coating) for small aerospace turbine engines, decreased 22.5% to $8.9 million, compared with $11.5 million in fiscal 2009. The Repair Group’s decrease in net sales volumes is due to (i) a component repair program being on hold subject to the original equipment manufacturer’s (“OEM”) evaluation / redesign of the repair, (ii) the overall weak global economic conditions and (iii) a larger customer consolidating its sources for component repair.

During fiscal 2010, the Repair Group’s selling, general and administrative expenses were $1.2 million, or 13.8% of net sales, compared with $1.3 million, or 11.0% of net sales, in fiscal 2009.

The Repair Group’s operating results were essentially breakeven in fiscal 2010, compared with an operating income of $0.1 million in fiscal 2009. A decrease in operating income principally attributable to the negative impact on margins from decreased sales volumes that occurred in fiscal 2010, compared to fiscal 2009, was partially offset by lower manufacturing labor and benefits costs due to a reduction in manufacturing employee wage rates and benefit levels.

Applied Surface Concepts Group (“ASC Group”)

Net sales in fiscal 2010 decreased 10.8% to $12.2 million, compared with $13.7 million in fiscal 2009. For purposes of the following discussion, (i) product net sales consist of selective electrochemical metal finishing equipment and solutions and (ii) contract service net sales consist of customized selective electrochemical metal finishing services. Net sales comparative information for fiscal 2010 and 2009, respectively, is as follows:

 

     Year Ended
September 30,
     Increase
(Decrease)
 

Net Sales

   2010      2009     

Product

   $ 6.1       $ 7.0       $ (0.9

Contract service

     5.9         6.5         (0.6

Other

     0.2         0.2           
                          

Total

   $ 12.2       $ 13.7       $ (1.5
                          

The decrease in product net sales in fiscal 2010 is primarily due to the loss of two (2) customers, one due to a product redesign and the other due to a change in its production methods. Partially offsetting these declines in product net sales is an increase in product net sales to customers in the aerospace industry. The overall weak global economic conditions, particularly a decrease in demand from the ASC Group’s customers in the oil /gas and the power generation industries, negatively impacted contract service net sales in fiscal 2010, compared with fiscal 2009. A portion of the ASC Group’s business is conducted in Europe and is denominated in local European currencies. Fluctuations in the exchange rates between the local European currencies and the U.S. dollar did not have a significant impact on net sales in fiscal 2010.

The ASC Group’s selling, general and administrative expenses were $4.4 million, or 36.1% of net sales, in fiscal 2010, compared with $4.2 million, or 30.3% of net sales in fiscal 2009. The increase in selling, general and administrative expenses is principally attributable to (i) higher depreciation and consulting costs related to the implementation of a

 

10


company-wide management information system during fiscal 2010; (ii) higher expenses associated with uncollectible accounts receivable; and (iii) higher sales and marketing expenses. These increases were partially offset by decreases in expenditures for legal and professional services, incentive and research and development.

The ASC Group’s operating income in fiscal 2010 was $0.2 million, compared with $0.8 million in fiscal 2009. The decrease in operating income is principally due to the negative impact on margins from decreased net sales volumes that occurred in fiscal 2010, compared with fiscal 2009, without a corresponding decrease in selling, general and administrative expenses. This negative impact was partially offset by the following changes in certain other components of the ASC Group’s operating expenditures in fiscal 2010, compared with fiscal 2009:

 

     Year Ended
September 30,
     Increase
(Decrease)
 

Operating expenditures

   2010      2009     

Material

   $ 2.2       $ 3.2       $ (1.0

Compensation and benefits

     2.8         3.0         (0.2

Operating costs benefited in fiscal 2010, compared with fiscal 2009, from (i) a decline in the ASC Group’s material cost due primarily to the aforementioned decline in product sales and a product mix change away from products that contain precious metals and (ii) a decrease in expenditures for compensation and benefits due primarily to lower healthcare costs and a reduction in the number of employees.

Corporate Unallocated Expenses

Corporate unallocated expenses, consisting of corporate salaries and benefits, legal and professional and other expenses that are not related to and, therefore, not allocated to the business segments, were $2.2 million in fiscal 2010, compared with $1.9 million in fiscal 2009 principally due to the following changes in certain components of these expenses:

 

     Year Ended
September 30,
     Increase
(Decrease)
 

Corporate Unallocated Expenses

   2010      2009     

Compensation and benefit expenses

   $ 1.0       $ 0.8       $ 0.2   

Consulting expenses

     0.3                 0.3   

Ireland facility expenses

     0.2         0.4         (0.2

The increase in corporate unallocated expenses in fiscal 2010 compared to the same period in fiscal 2009 is principally due to (i) higher consulting expenses associated with the Company’s Chief Executive Officer (full year in fiscal 2010) and (ii) an increase in compensation and related benefit expenses due principally to higher incentive compensation and salary retirement plan expenses. These expenses were partially offset by a decrease in depreciation expense related to the activity of leasing the Cork, Ireland facility. Such activity was included in discontinued operations during the first nine months of fiscal 2009, the period during which such facility was classified as held for sale. In the fourth quarter of fiscal 2009, such facility was no longer classified as held for sale and, therefore, a $0.2 million higher aggregate depreciation expense was recorded to account for both fiscal 2009 depreciation expense as well as prior period “catch-up” depreciation.

Other/General

Interest expense was nominal in both fiscal 2010 and 2009 principally because there were no amounts outstanding under the Company’s revolving credit agreement during either period.

Other income, net consists principally of $0.4 million of rental income earned from the lease of the Cork, Ireland facility.

The Company believes that inflation did not materially affect its results of operations in either fiscal 2010 or 2009, and does not expect inflation to be a significant factor in fiscal 2011.

 

11


2. Fiscal Year 2009 Compared with Fiscal Year 2008

Net sales in fiscal 2009 decreased 7.4% to $93.9 million, compared with $101.4 million in fiscal 2008.

Income from continuing operations in fiscal 2009 was $7.8 million, compared with $5.5 million in fiscal 2008. Included in the $7.8 million of income from continuing operations in fiscal 2009 was LIFO income of $1.6 million. Included in the $5.5 million of income from continuing operations in fiscal 2008 was (i) $0.5 million of expense related to an amicable business settlement of a product dispute that originated in fiscal 2007, (ii) $0.8 million of expense related to the impairment of a long-lived asset and (iii) LIFO expense of $1.7 million. Income from discontinued operations, net of tax, was $0.2 million in fiscal 2009, compared with $0.3 million in fiscal 2008. Net income in fiscal 2009 was $8.0 million, compared with $5.8 million in fiscal 2008.

Aerospace Component Manufacturing Group (“ACM Group”)

Net sales in fiscal 2009 decreased 4.6% to $68.6 million, compared with $72.0 million in fiscal 2008. For purposes of the following discussion, the ACM Group considers aircraft that can accommodate less than 100 passengers to be small aircraft and those that can accommodate 100 or more passengers to be large aircraft. Net sales of airframe components for small aircraft increased $0.3 million to $38.5 million in fiscal 2009, compared with $38.2 million in fiscal 2008. Net sales of turbine engine components for small aircraft, which consist primarily of business and regional jets, as well as military transport and surveillance aircraft, increased $1.1 million to $21.0 million in fiscal 2009, compared with $19.9 million in fiscal 2008. Net sales of airframe components for large aircraft decreased $3.0 million to $4.6 million in fiscal 2009, compared with $7.6 million in fiscal 2008. Net sales of turbine engine components for large aircraft decreased $0.8 million to $2.2 million in fiscal 2009, compared with $3.0 million in fiscal 2008. Commercial product sales and other revenues were $2.3 million and $3.3 million in fiscal 2009 and 2008, respectively. The decline in net sales of airframe and turbine engine components for large aircraft is primarily attributable to the overall weak global economic conditions and the related impact such conditions have had on commercial aviation.

The ACM Group’s airframe and turbine engine component products have both military and commercial applications. Net sales of airframe and turbine engine components that solely have military applications were $35.0 million in fiscal 2009, compared with $33.6 million in fiscal 2008. This increase is attributable in part to increased military spending due to ongoing wartime demand such as for additional military helicopters and related replacement components.

The ACM Group’s selling, general and administrative expenses decreased $0.7 million to $4.2 million, or 6.1% of net sales, in fiscal 2009, compared with $4.9 million, or 6.8% of net sales, in fiscal 2008. Included in selling, general and administrative expenses in fiscal 2008 was $0.5 million related to the payment to a customer that (i) was made to achieve an amicable business settlement of a product dispute and (ii) that the Company agreed to make as a business gesture of good faith and cooperation without admission of liability. The remaining selling, general and administrative expenses in fiscal 2008 were $4.4 million, or 6.1% of net sales. The remaining $0.2 million decrease in selling, general and administrative expenses in fiscal 2009 compared with fiscal 2008 was principally due to a $0.1 million decrease in variable selling cost principally due to the decrease in net sales.

During the fourth quarter of fiscal 2008, the ACM group recorded $0.8 million of expense related the impairment of a long-lived asset.

The ACM Group’s operating income in fiscal 2009 was $13.4 million, compared with $9.9 million in fiscal 2008. Operating results in fiscal 2009 were favorably impacted by (i) an approximate $3.3 million reduction in the LIFO expense in fiscal 2009, compared with fiscal 2008, (ii) lower expenditures for natural gas principally due to lower consumption and (iii) the negative impact in fiscal 2008, of the aforementioned $0.5 million settlement expense and $0.8 million impairment expense. These improvements were partially offset by the negative impact of (i) higher manufacturing labor and benefits expense due to higher average levels of employment and (ii) an increase in other manufacturing overhead costs incurred in fiscal 2009, compared with fiscal 2008.

Turbine Component Services and Repair Group (“Repair Group”)

During fiscal 2009, net sales, which consist principally of component repair services (including precision component machining and industrial coating) for small aerospace turbine engines, decreased 19.6% to $11.5 million, compared with $14.3 million in fiscal 2008. The Repair Group’s decrease in net sales is primarily due to the overall weak global economic conditions.

During fiscal 2009, the Repair Group’s selling, general and administrative expenses were $1.3 million, or 11.0% of net sales, compared with $1.3 million, or 9.2% of net sales, in fiscal 2008.

 

12


The Repair Group’s operating income in fiscal 2009 was $0.1 million, compared with an operating loss of $0.3 million in fiscal 2008. Operating results in fiscal 2009 were positively impacted principally by (i) an increase in selling prices, (ii) $0.1 million of income related to the favorable settlements of certain obligations and (iii) the improved management of operating expenses, principally labor costs. Although sales volumes were higher in fiscal 2008, operating results were negatively impacted in fiscal 2008 by startup costs related to the production launch of a new component repair program.

As discussed in the Company’s Form 8-K filed on January 20, 2009, the Company explored strategic alternatives for the Repair Group for the purpose of enhancing shareholder value. The Company conducted an orderly and comprehensive review and evaluation of strategic alternatives available to it, including a divestiture of the Repair Group.

Applied Surface Concepts Group (“ASC Group”)

Net sales decreased 9.0% to $13.7 million in fiscal 2009, compared with $15.1 million in fiscal 2008. In fiscal 2009, product net sales, consisting of selective electrochemical metal finishing equipment and solutions, decreased $0.4 million to $7.1 million, compared with $7.5 million in fiscal 2008. In fiscal 2009, customized selective electrochemical metal finishing contract service net sales decreased $0.9 million to $6.5 million, compared with $7.4 million in fiscal 2008. The overall weak global economic conditions, particularly in the oil and gas industry, negatively impacted the ASC Group’s net sales in fiscal 2009. A portion of the ASC Group’s business is conducted in Europe and is denominated in local European currencies, which have weakened in relation to the US dollar, resulting in an unfavorable currency impact on net sales in fiscal 2009 of approximately $1.0 million.

The ASC Group’s selling, general and administrative expenses decreased $0.2 million to $4.1 million, or 30.3% of net sales, in fiscal 2009, compared with $4.3 million, or 28.7% of net sales, in fiscal 2008. The decrease in selling, general and administrative expenses in fiscal 2009 was principally due to a reduction in compensation and benefit related expenses attributable to the elimination of certain positions and the temporary reduction of employee compensation.

The ASC Group’s operating income in fiscal 2009 was $0.8 million, compared with $1.3 million in fiscal 2008. This decrease in operating income was principally due to the effect of lower net sales without a corresponding decrease in operating expenses.

Corporate Unallocated Expenses

Corporate unallocated expenses, consisting of corporate salaries and benefits, legal and professional and other corporate expenses, were $1.9 million in fiscal 2009, compared with $2.0 million in fiscal 2008. The $0.1 million net decrease in fiscal 2009 is principally due to a $0.4 million decrease in legal and professional expenses in fiscal 2009, compared with fiscal 2008. This decrease was partially offset by $0.2 million of depreciation expense recorded in the fourth quarter of fiscal 2009 related to an asset that was classified as held for sale, beginning in fiscal 2008 and through the third quarter of fiscal 2009, for which no depreciation expense was required to be recorded while it was classified as held for sale.

Other/General

Interest expense from continuing operations was $0.1 million in both fiscal 2009 and 2008. The following table sets forth the weighted average interest rates and weighted average outstanding balances under the Company’s revolving credit agreement in fiscal years 2009 and 2008.

 

     Weighted
Average

Interest Rate
Year Ended
September 30,
    Weighted Average
Outstanding Balance
Year Ended
September 30,
 

Credit Agreement

   2009      2008     2009      2008  

Revolving credit agreement

     N/A         6.8     N/A       $ 1.4 million   

 

B. Liquidity and Capital Resources

Cash and cash equivalents decreased to $18.7 million at September 30, 2010, compared with $19.9 million at September 30, 2009, while short-term investments increased to $3.0 million at September 30, 2010, compared with zero at September 30, 2009. At September 30, 2010, $6.1 million of the Company’s cash and cash equivalents and short-term investments are in the possession of its non-U.S. subsidiaries. Distributions from the Company’s non-U.S. subsidiaries to the Company may be subject to statutory restriction, adverse tax consequences or other limitations.

 

13


The Company’s operating activities provided $9.9 million of cash in fiscal 2010, compared with $14.5 million of cash provided by operating activities (of which $14.7 million was provided by continuing operations) in fiscal 2009. The $9.9 million of cash provided by operating activities in fiscal 2010 was primarily due to (i) net income of $5.4 million, (ii) $2.5 million from the impact of such non-cash items as depreciation expense, deferred taxes and LIFO expense and (iii) a $1.1 million decrease in inventory. These changes in the components of working capital were due primarily to factors resulting from normal business conditions of the Company, including (i) the relative timing of collections from customers, (ii) the collection of refundable income taxes and (iii) the relative timing of payments to suppliers and tax authorities.

Capital expenditures were $6.7 million in fiscal 2010 compared with $5.3 million in fiscal 2009. Capital expenditures during fiscal 2010 consisted of $6.1 million by the ACM Group, $0.4 million by the ASC Group and $0.2 million by the Repair Group. In addition to the $6.7 million expended during fiscal 2010, $0.5 million has been committed as of September 30, 2010. The Company anticipates that total fiscal 2011 capital expenditures will be within the range of $4.0 to $5.0 million and will relate principally to the further enhancement of production and product offering capabilities across all three of the Company’s business groups.

During fiscal 2010, the Company invested $0.7 million to repurchase its common shares under a stock repurchase program initiated in June 2010, at which time the Company indicated that it was prepared to invest up to $1.0 million to repurchase its shares.

In the fourth quarter of fiscal 2010, the Company declared a special cash dividend of $0.15 per common share, which will result in a cash expenditure of $0.8 million during first quarter of fiscal 2011.

At September 30, 2010, the Company had an $8.0 million revolving credit agreement with a bank, subject to sufficiency of collateral, which expires on January 1, 2012 and bears interest at the bank’s base rate plus 0.50%. The interest rate was 3.25% at September 30, 2010. A 0.35% commitment fee is incurred on the unused balance of the revolving credit agreement. At September 30, 2010, no amount was outstanding and the Company had $7.9 million available under its $8.0 million revolving credit agreement. The Company’s revolving credit agreement is secured by substantially all of the Company’s assets located in the U.S. and a guarantee by its U.S. subsidiaries. Under its revolving credit agreement with the bank, the Company is subject to certain customary covenants. These include, without limitation, covenants (as defined) that require maintenance of certain specified financial ratios, including a minimum tangible net worth level and a minimum EBITDA level. The Company was in compliance with all applicable covenants at September 30, 2010.

The Company believes that cash flows from its operations together with existing cash reserves and the funds available under its revolving credit agreement will be sufficient to meet its working capital requirements through the end of fiscal year 2011.

 

C. Off-Balance Sheet Arrangements

The Company does not have any obligations that meet the definition of an off-balance sheet arrangement that have had, or are reasonably likely to have, a material effect on the Company’s financial condition or results of operations.

 

D. Other Contractual Obligations

The following table summarizes the Company’s outstanding contractual obligations and other commercial commitments at September 30, 2010 and the effect such obligations are expected to have on liquidity and cash flow in future periods.

 

     Payments Due by Period  
     (Amounts in thousands)  

Other Contractual Obligations

   Total      Up to
1 year
     >1 up to
3 years
     >3 up to
5 years
     More than
5 years
 

Debt obligations

   $ 5       $ 2       $ 3       $       $   

Capital lease obligations

     145         117         28                   

Operating lease obligations

     1,188         456         474         258           
                                            

Total

   $ 1,338       $ 575       $ 505       $ 258       $   
                                            

 

14


Excluded from the foregoing Other Contractual Obligations table are open purchase orders at September 30, 2010 for raw materials and supplies required in the normal course of business. Excluded from the foregoing Other Contractual Obligations table is a $0.1 million liability for uncertain tax positions as the Company is unable to determine at this time if and/or when this amount, or any portion thereof, may become payable. Included in other long-term liabilities in the Company’s consolidated balance sheet as of September 30, 2010 is $6.1 million of liabilities related to the Company’s defined benefit pension plans. The Company is expected to make contributions of approximately $0.6 million to fund its defined benefit pension plans in fiscal 2011.

 

E. Outlook

The Company’s Repair and ACM Groups’ businesses continue to be heavily dependent upon the strength of the commercial airlines as well as the aircraft and related engine manufacturers. The ACM group is also dependent on the military aerospace industry. Consequently, the performance of the domestic and international air transport industry as well as government defense spending directly and significantly impacts the performance of the Repair and ACM Groups’ businesses.

After the recent two year period of negative operating results in the global commercial airline industry that was due in large part to the global economic downturn, the financial condition of the global commercial airline industry improved in 2010 with a return to profitability. This return to profitability is due to strong demand in both air freight and passenger traffic resulting principally from improvements in both business and consumer confidence levels. The improved confidence levels can be attributed to the subsiding of the global economic downturn. During fiscal 2010, both air freight and passenger traffic returned to pre-recession levels.

The Company supplies new and spare components for military aircraft. Military spending has continued to be strong and level in recent years. As a result of continued military initiatives, there has been strong demand for both new and spare components for military customers. The 2011-12 defense budget includes the planned elimination of certain military aircraft. These eliminations are countered by the new programs being supported—such as the tanker program, the F-35 and V-22.

The air transport industry’s long-term outlook is for continued, steady growth. Such longer-term outlook suggests the need for additional aircraft and, therefore, growth in the requirement for airframe and engine components as well as aerospace turbine engine component repairs. The air transport industry has recently benefited from several favorable trends, including: (i) projected growth in air traffic, (ii) major replacement and refurbishment cycles driven by the desire for more fuel efficient aircraft and fleet commonality and (iii) relatively stable fuel prices. Recent improvement in aircraft capacity utilization is due to the increase in air freight and passenger traffic, which is driving demand for additional capacity. While aircraft capacity was reduced sharply in 2009, it has returned to the market at about the same pace as the growth in demand for such capacity. The Company believes this pattern should continue with the long-term steady growth projected by the air transport industry. The Company’s current outlook for the air transport industry is cautiously optimistic while the military segment remains stable, yet subject to potential changes in defense spending decisions. However, the Company believes that it is poised to take advantage of the resulting improvement in order demand from the commercial airframe and engine manufacturers if and when it may occur.

It is difficult to determine, at this time, the potential long-term impact that the aforementioned factors may have on air travel and the demand for the products and services provided by the Company. Lack of continued improvement in the global economy could result in credit risk associated with serving the airlines and/or their suppliers. All of these consequences, to the extent that they may occur, could negatively impact the Company’s net sales, operating profits and cash flows. However, in light of the current business environment, the Company believes that cash on-hand, short-term investments, funds available under its revolving credit agreement, and anticipated funds generated from operations will be adequate to meet its liquidity needs through the foreseeable future.

 

F. Critical Accounting Policies and Estimates

Allowances for Doubtful Accounts

The Company maintains allowances for doubtful accounts for estimated losses resulting from the inability of certain customers to make required payments. The Company evaluates the adequacy of its allowances for doubtful accounts each quarter based on the customers’ credit-worthiness, current economic trends or market conditions, past collection history, aging of outstanding accounts receivable and specific identified risks. As these factors change, the Company’s allowances

 

15


for doubtful accounts may change in subsequent periods. Historically, losses have been within management’s expectations and have not been significant.

Inventories

The Company maintains allowances for obsolete and excess inventory. The Company evaluates its allowances for obsolete and excess inventory each quarter. Each business segment maintains formal policies, which require at a minimum that reserves be established based on an analysis of the age of the inventory. In addition, if the Company learns of specific obsolescence, other than that identified by the aging criteria, an additional reserve will be recognized as well. Specific obsolescence may arise due to a technological or market change, or based on cancellation of an order. Management’s judgment is necessary in determining the realizable value of these products to arrive at the proper allowance for obsolete and excess inventory.

Impairment of Long-Lived Assets

The Company reviews the carrying value of its long-lived assets, including property, plant and equipment, at least annually or when events and circumstances warrant such a review. This review involves judgment and is performed using estimates of future undiscounted cash flows, which include proceeds from disposal of assets and which the Company considers a critical accounting estimate. If the carrying value of a long-lived asset is greater than the estimated undiscounted future cash flows, then the long-lived asset is considered impaired and an impairment charge is recorded for the amount by which the carrying value of the long-lived asset exceeds its fair value.

In projecting future undiscounted cash flows, the Company relies on internal budgets and forecasts, and projected proceeds upon disposal of long-lived assets. The Company’s budgets and forecasts are based on historical results and anticipated future market conditions, such as the general business climate and the effectiveness of competition. The Company believes that its estimates of future undiscounted cash flows and fair value are reasonable; however, changes in estimates of such undiscounted cash flows and fair value could change the Company’s estimates of fair value, which could result in future impairment charges.

Defined Benefit Pension Plan Expense

The Company maintains three defined benefit pension plans in accordance with the requirements of the Employee Retirement Income Security Act of 1974 (“ERISA”). The amounts recognized in the consolidated financial statements for pension benefits under these three defined benefit pension plans are determined on an actuarial basis utilizing various assumptions. The discussion that follows provides information on the significant assumptions/elements associated with these defined benefit pension plans.

One significant assumption in determining net pension expense is the expected return on plan assets. The Company determines the expected return on plan assets principally based on (i) the expected return for the various asset classes in the respective plans’ investment portfolios and (ii) the targeted allocation of the respective plans’ assets. The expected return on plan assets is developed using historical asset return performance as well as current and anticipated market conditions such as inflation, interest rates and market performance. Should the actual rate of return differ materially from the assumed/expected rate, the Company could experience a material adverse effect on the funded status of its plans and, accordingly, on its related future net pension expense.

Another significant assumption in determining the net pension expense is the discount rate. The discount rate for each plan is determined, as of the fiscal year end measurement date, using prevailing market spot-rates (from an appropriate yield curve) with maturities corresponding to the expected timing/date of the future defined benefit payment amounts for each of the respective plans. Such corresponding spot-rates are used to discount future years’ projected defined benefit payment amounts back to the fiscal year end measurement date as a present value. A composite discount rate is then developed for each plan by determining the single rate of discount that will produce the same present value as that obtained by applying the annual spot-rates. The discount rate may be further revised if the market environment indicates that the above methodology generates a discount rate that does not accurately reflect the prevailing interest rates as of the fiscal year end measurement date

Deferred Tax Valuation Allowance

The Company accounts for deferred taxes in accordance with the provisions of the Accounting Standards Codification (“ASC”) guidance related to accounting for income taxes, whereby the Company recognizes an income tax benefit related to its consolidated net losses and other temporary differences between financial reporting basis and tax reporting basis. At

 

16


September 30, 2010 and 2009, the Company’s net deferred tax liability before any valuation allowance was $0.4 million and a nominal amount, respectively.

 

G. Impact of Newly Issued Accounting Standards

In February 2010, the Financial Accounting Standards Board (“FASB”), issued an Accounting Standard Update (“ASU”) No. 2010-09, which addresses certain implementation issues related to an entity’s requirement to perform and disclose subsequent events procedures. The ASU (i) exempts entities that file their financial statements with the SEC from disclosing the date through which subsequent events procedures have been performed and (ii) clarifies the circumstances in which an entity’s financial statements would be considered restated and the entity would therefore be required to update its subsequent events evaluation. The guidance provided by the FASB became effective immediately upon issuance, and the Company has adopted its disclosure requirements within this Form 10-K for the year ended September 30, 2010.

In January 2010, the FASB issued ASU No. 2010-06 to improve disclosures about fair value measurements, which amends the ASC related to fair value measurements and disclosures. This amendment to the ASC will add new requirements for disclosures about transfers into and out of fair value hierarchy Levels 1, 2 and 3 and separate disclosures about purchases, sales, issuances and settlements relating to fair value hierarchy Level 3 measurements. The ASU also clarifies existing fair value disclosures about the level of disaggregation and about inputs and valuation techniques used to measure fair value. Further, the ASU amends guidance on employers’ disclosure requirements for plan assets for defined benefit pensions and other postretirement benefit plans. Under the new guidance it is required that disclosures be provided by classes of assets instead of by major categories of assets. This ASU is effective for the first reporting period beginning after December 15, 2009, except for the requirement to provide fair value hierarchy Level 3 activity of purchases, sales, issuances and settlements on a gross basis, which will be effective for fiscal years beginning on or after December 15, 2010, and for interim periods within those fiscal years. The Company does not expect the adoption of this guidance to have a material impact on its consolidated financial statements and disclosures.

 

17


Item 8. Financial Statements and Supplementary Data

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Shareholders of SIFCO Industries, Inc. and Subsidiaries:

We have audited the accompanying consolidated balance sheets of SIFCO Industries, Inc. (an Ohio Corporation) and Subsidiaries as of September 30, 2010 and 2009, and the related consolidated statements of operations, shareholders’ equity and cash flows for each of the three years in the period ended September 30, 2010. Our audits of the basic financial statements included the financial statement schedule appearing under Schedule II. These financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and financial statement schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of SIFCO Industries, Inc. and Subsidiaries as of September 30, 2010 and 2009, and the results of their operations and their cash flows for each of the three years in the period ended September 30, 2010 in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

/s/ GRANT THORNTON LLP

Cleveland, Ohio

December 15, 2010

 

18


SIFCO Industries, Inc. and Subsidiaries

Consolidated Statements of Operations

(Amounts in thousands, except per share data)

 

     Years Ended September 30,  
     2010     2009     2008  

Net sales

   $ 83,270      $ 93,888      $ 101,391   

Operating expenses:

      

Cost of goods sold

     63,529        69,947        79,161   

Selling, general and administrative expenses

     11,860        11,465        12,495   

Loss (gain) on disposal or impairment of operating assets

     (34            757   
                        

Total operating expenses

     75,355        81,412        92,413   
                        

Operating income

     7,915        12,476        8,978   

Interest income

     (57     (16     (24

Interest expense

     71        67        149   

Foreign currency exchange loss (gain)

     (23     217        35   

Other income, net

     (470     (119     (2
                        

Income from continuing operations before income tax provision

     8,394        12,327        8,820   

Income tax provision

     3,032        4,480        3,277   
                        

Income from continuing operations

     5,362        7,847        5,543   

Income from discontinued operations, net of tax

            188        287   
                        

Net income

   $ 5,362      $ 8,035      $ 5,830   
                        

Income per share from continuing operations

      

Basic

   $ 1.01      $ 1.48      $ 1.05   

Diluted

   $ 1.00      $ 1.47      $ 1.04   

Income per share from discontinued operations, net of tax

      

Basic

   $      $ 0.04      $ 0.05   

Diluted

   $      $ 0.04      $ 0.05   

Net income per share

      

Basic

   $ 1.01      $ 1.52      $ 1.10   

Diluted

   $ 1.00      $ 1.51      $ 1.09   

Weighted-average number of common shares (basic)

     5,300        5,295        5,291   

Weighted-average number of common shares (diluted)

     5,344        5,325        5,340   

See notes to consolidated financial statements.

 

19


SIFCO Industries, Inc. and Subsidiaries

Consolidated Balance Sheets

(Amounts in thousands, except per share data)

 

     September 30,  
     2010     2009  
ASSETS     

Current assets:

    

Cash and cash equivalents

   $ 18,671      $ 19,875   

Short-term investments

     3,020          

Receivables, net

     17,182        17,010   

Inventories

     6,272        7,568   

Refundable income taxes

     692        889   

Deferred income taxes

     1,502        1,651   

Prepaid expenses and other current assets

     627        601   
                

Total current assets

     47,966        47,594   

Property, plant and equipment:

    

Land

     579        578   

Buildings

     13,642        14,748   

Machinery and equipment

     44,350        38,785   
                
     58,571        54,111   

Accumulated depreciation

     37,822        37,171   
                

Property, plant and equipment, net

     20,749        16,940   

Other assets

     935        1,236   
                

Total assets

   $ 69,650      $ 65,770   
                
LIABILITIES AND SHAREHOLDERS’ EQUITY     

Current liabilities:

    

Current maturities of long-term debt

   $ 108      $ 101   

Accounts payable

     7,939        7,629   

Accrued liabilities

     4,287        4,324   
                

Total current liabilities

     12,334        12,054   

Long-term debt, net of current maturities

     35        154   

Deferred income taxes

     2,359        2,110   

Other long-term liabilities

     6,883        6,207   

Shareholders’ equity:

    

Serial preferred shares, no par value, authorized 1,000 shares

              

Common shares, par value $1 per share, authorized 10,000 shares; issued 5,325 shares in 2010 and 5,298 shares in 2009; outstanding 5,259 shares in 2010 and 5,298 shares in 2009

     5,325        5,298   

Additional paid-in capital

     6,983        6,490   

Retained earnings

     47,733        43,160   

Accumulated other comprehensive loss

     (11,310     (9,703

Common shares held in treasury at cost, 66 shares in 2010, no shares in 2009

     (692       
                

Total shareholders’ equity

     48,039        45,245   
                

Total liabilities and shareholders’ equity

   $ 69,650      $ 65,770   
                

See notes to consolidated financial statements.

 

20


SIFCO Industries, Inc. and Subsidiaries

Consolidated Statements of Cash Flows

(Amounts in thousands)

 

     Years Ended September 30,  
     2010     2009     2008  

Cash flows from operating activities:

      

Net income

   $ 5,362      $ 8,035      $ 5,830   

Income from discontinued operations, net of tax

            (188     (287

Adjustments to reconcile net income to net cash provided by (used for) operating activities:

      

Depreciation and amortization

     1,895        1,825        1,483   

(Gain) loss on disposal of property, plant and equipment

     (34     (5     1   

LIFO (income) provision

     175        (1,583     1,712   

Deferred income taxes

     436        580        1,184   

Share transactions under employee stock plan

     519        94        60   

Asset impairment charges

                   757   

Changes in operating assets and liabilities:

      

Receivables

     (218     2,128        (58

Inventories

     1,090        5,726        (3,412

Refundable income taxes

     197        420        (1,311

Prepaid expenses and other current assets

     (32     (136     (110

Other assets

     299        4        (184

Accounts payable

     321        (746     (650

Accrued liabilities

     (280     (765     (705

Other long-term liabilities

     148        (644     (1,337
                        

Net cash provided by operating activities of continuing operations

     9,878        14,745        9,797   

Net cash used for operating activities of discontinued operations

            (191     (62

Cash flows from investing activities:

      

Capital expenditures

     (6,747     (5,256     (2,012

Purchase of short-term investments

     (3,039              

Proceeds from disposal of property, plant and equipment

     55        5        1   
                        

Net cash used for investing activities of continuing operations

     (9,731     (5,251     (2,011

Cash flows from financing activities:

      

Proceeds from revolving credit agreement

                   21,029   

Repayments of revolving credit agreement

                   (23,629

Repayments of long-term debt

            (2       

Dividends paid

     (529              

Repurchase of common shares

     (692              

Repayments of capital lease obligations

     (109     (106     (109
                        

Net cash used for financing activities of continuing operations

     (1,330     (108     (2,709
                        

(Decrease) increase in cash and cash equivalents

     (1,183     9,195        5,015   

Cash and cash equivalents at beginning of year

     19,875        10,440        5,510   

Effect of exchange rate changes on cash and cash equivalents

     (21     240        (85
                        

Cash and cash equivalents at end of year

   $ 18,671      $ 19,875      $ 10,440   
                        

Supplemental disclosure of cash flow information:

      

Cash paid for interest

   $ (58   $ (52   $ (172

Cash paid for income taxes, net

   $ (2,070   $ (4,061   $ (3,598

See notes to consolidated financial statements.

 

21


SIFCO Industries, Inc. and Subsidiaries

Consolidated Statements of Shareholders’ Equity

(Amounts in thousands)

 

     Common
Shares
     Additional
Paid-In
Capital
    Retained
Earnings
    Accumulated
Other
Comprehensive
Loss
    Common
Shares
Held in
Treasury
    Total
Shareholders’
Equity
 

Balance — September 30, 2007

   $ 5,281       $ 6,352      $ 29,828      $ (4,683   $      $ 36,778   

Comprehensive income:

             

Net income

                    5,830                      5,830   

Foreign currency translation adjustment

                           (500            (500

Pension liability adjustment, net of tax

                           (1,490            (1,490
                   

Total comprehensive income

                3,840   

Stock option expense

             50                             50   

Share transactions under employee stock plans

     14         (3                          11   
                                                 

Balance — September 30, 2008

   $ 5,295       $ 6,399      $ 35,658      $ (6,673   $      $ 40,679   

Comprehensive income:

             

Net income

                    8,035                      8,035   

Foreign currency translation adjustment

                           212               212   

Pension liability adjustment, net of tax

                    (4     (3,242            (3,246
                   

Total comprehensive income

                5,001   

Dividend declared

                    (529                   (529

Stock option and performance share expense

             82                             82   

Share transactions under employee stock plans

     3         9                             12   
                                                 

Balance — September 30, 2009

   $ 5,298       $ 6,490      $ 43,160      $ (9,703   $      $ 45,245   

Comprehensive income:

             

Net income

                    5,362                      5,362   

Foreign currency translation adjustment

                           (1,079            (1,079

Pension liability adjustment, net of tax

                           (528            (528
                   

Total comprehensive income

                3,755   

Dividend declared

                    (789                   (789

Performance share expense

             325                             325   

Repurchase of common shares

                                  (692     (692

Share transactions under employee stock plans

     27         168                             195   
                                                 

Balance — September 30, 2010

   $ 5,325       $ 6,983      $ 47,733      $ (11,310   $ (692   $ 48,039   
                                                 

See notes to consolidated financial statements.

 

22


SIFCO Industries, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

Years ended September 30, 2010, 2009 and 2008

(Dollars in thousands, except share and per share data)

1. Summary of Significant Accounting Policies

A. DESCRIPTION OF BUSINESS

SIFCO Industries, Inc. and Subsidiaries (the “Company”) are engaged in the production and sale of a variety of metalworking processes, services and products produced primarily to the specific design requirements of its customers. The processes and services include forging, heat-treating, coating, welding, machining, and selective electrochemical metal finishing. The products include forged components, machined forged parts and other machined metal parts, remanufactured components for turbine engines, and selective electrochemical metal finishing solutions and equipment. The Company’s operations are conducted in three business segments: (i) Aerospace Component Manufacturing Group, (ii) Turbine Component Services and Repair Group and (iii) Applied Surface Concepts Group.

B. PRINCIPLES OF CONSOLIDATION

The accompanying consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries. All significant intercompany accounts and transactions have been eliminated. The U.S. dollar is the functional currency for all the Company’s U.S. operations. For these operations, all gains and losses from completed currency transactions are included in income currently. Effective October 1, 2009, the functional currency of the Company’s Irish subsidiary was changed from the euro to the U.S. dollar. A substantial majority of the Irish subsidiary’s transactions, as well as its largest monetary asset, are denominated in U.S. dollars and, accordingly, the Company determined that such transactions should be reflected in U.S. dollars. The impact of making this change was not material to any year within the accompanying consolidated financial statements prior to October 1, 2009. The functional currency for the Company’s other non-U.S. subsidiaries is the local currency. Assets and liabilities are translated into U.S. dollars at the rates of exchange at the end of the period, and revenues and expenses are translated using average rates of exchange. Foreign currency translation adjustments are reported as a component of accumulated other comprehensive loss in the consolidated statements of shareholders’ equity.

C. CASH EQUIVALENTS

The Company considers all highly liquid short-term investments with original maturities of three months or less to be cash equivalents.

D. SHORT-TERM INVESTMENTS

In general, short-term investments have a maturity of three months to one year at the date of purchase. Short-term investments classified as held-to-maturity are recorded at cost, which approximates fair value.

E. CONCENTRATIONS OF CREDIT RISK

Receivables are presented net of allowance for doubtful accounts of $582 and $633 at September 30, 2010 and 2009, respectively. During fiscal 2010 and 2009, $236 and $141 of accounts receivable were written off against the allowance for doubtful accounts, respectively. Bad debt expense totaled $185, $195 and $254 in fiscal 2010, 2009 and 2008, respectively.

Most of the Company’s receivables represent trade receivables due from manufacturers of turbine engines and aircraft components and turbine engine overhaul companies located throughout the world, including a significant concentration of U.S. based companies. Approximately 44% of the Company’s net sales in fiscal 2010 were to four (4) of its largest customers, with an additional 17% of combined net sales to various direct subcontractors to these customers. No other single group or customer represents greater than 5% of total net sales in fiscal 2010. The Company performs ongoing credit evaluations of its customers’ financial conditions. The Company believes its allowance for doubtful accounts is sufficient based on the credit exposures outstanding at September 30, 2010.

F. INVENTORY VALUATION

Inventories are stated at the lower of cost or market. Cost is determined by the Company’s ACM Group using the last-in, first-out (“LIFO”) method for approximately 58% and 63% of the Company’s inventories at September 30, 2010 and 2009, respectively. The first-in, first-out (“FIFO”) method is used to value the remainder of the Company’s inventories.

The Company maintains allowances for obsolete and excess inventory. The Company evaluates its allowances for obsolete and excess inventory each quarter. Each business segment maintains policies, which require at a minimum that reserves be established based on an analysis of the age of the inventory. In addition, if the Company identifies specific obsolescence, other than that identified by the aging criteria, an additional reserve will be recognized. Specific obsolescence and excess reserve requirements may arise due to technological or market changes, or based on cancellation of an order. The

 

23


SIFCO Industries, Inc. and Subsidiaries

Notes to Consolidated Financial Statements — (Continued)

 

Company’s reserves for obsolete and excess inventory were $1,212 and $1,319 at September 30, 2010 and 2009, respectively.

G. PROPERTY, PLANT AND EQUIPMENT

Property, plant and equipment are stated at cost. Depreciation is generally computed using the straight-line and the double declining balance methods. Depreciation is provided in amounts sufficient to amortize the cost of the assets over their estimated useful lives. Depreciation provisions are based on estimated useful lives: (i) buildings, including building improvements — 5 to 50 years; (ii) machinery and equipment, including office and computer equipment — 3 to 30 years, (iii) software 1-10 years and (iv) leasehold improvements 3-5 years.

The Company reviews the carrying value of its long-lived assets, including property, plant and equipment, at least annually or when events and circumstances warrant such a review. This review is performed using estimates of future undiscounted cash flows, which include proceeds from disposal of assets. If the carrying value of a long-lived asset is greater than the estimated undiscounted future cash flows, then the long-lived asset is considered impaired and an impairment charge is recorded for the amount by which the carrying value of the long-lived asset exceeds its fair value. Asset impairment charges of $757 were recorded in fiscal 2008 related to certain machinery and equipment of the Company’s ACM Group. The machinery and equipment was determined to be impaired and, therefore, the carrying value of such assets was reduced to its net realizable value.

H. NET INCOME PER SHARE

The Company’s net income per basic share has been computed based on the weighted-average number of common shares outstanding. Net income per diluted share reflects the effect of the Company’s outstanding stock options under the treasury stock method. However, during periods of operating losses, outstanding stock options are not included in the calculation of net loss per diluted share because such inclusion would be anti-dilutive.

I. REVENUE RECOGNITION

The Company recognizes revenue in accordance with the relevant portions of the guidance provided by the United States Securities and Exchange Commission (“SEC”) related to revenue recognition in financial statements. Revenue is generally recognized when products are shipped or services are provided to customers.

J. IMPACT OF RECENTLY ADOPTED ACCOUNTING

In February 2010, the Financial Accounting Standards Board (“FASB”), issued an Accounting Standard Update (“ASU”) No. 2010-09, which addresses certain implementation issues related to an entity’s requirement to perform and disclose subsequent events procedures. The ASU (i) exempts entities that file their financial statements with the SEC from disclosing the date through which subsequent events procedures have been performed and (ii) clarifies the circumstances in which an entity’s financial statements would be considered restated and the entity would therefore be required to update its subsequent events evaluation. The guidance provided by the FASB became effective immediately upon issuance, and the Company has adopted its disclosure requirements for the year ended September 30, 2010.

The FASB issued a technical amendment to employers’ disclosure requirement for plan assets for defined benefit pensions and other postretirement benefit plans, which is integrated into ASC 715-20-50, Compensation — Retirement Benefits — Defined Benefit Pension Plans — General Disclosure. The objective is to provide users of financial statements with an understanding of (i) how investment allocation decisions are made, (ii) major categories of plan assets held by the plans, (iii) how fair value of plan assets are measured, (iv) the effect of fair value measurements on changes in plan assets during a period and (v) significant concentrations of risk within plan assets. Company has adopted its disclosure requirements for the year ended September 30, 2010.

K. IMPACT OF NEWLY ISSUED ACCOUNTING STANDARDS

In January 2010, the FASB issued ASU No. 2010-06 to improve disclosures about fair value measurements, which amends the Accounting Standard Codification (“ASC”) related to fair value measurements and disclosures. This amendment to the ASC will add new requirements for disclosures about transfers into and out of fair value hierarchy Levels 1, 2 and 3 and separate disclosures about purchases, sales, issuances and settlements relating to fair value hierarchy Level 3 measurements. The ASU also clarifies existing fair value disclosures about the level of disaggregation and about inputs and valuation techniques used to measure fair value. Further, the ASU amends guidance on employers’ disclosure requirements for plan assets for defined benefit pensions and other postretirement benefit plans. Under the new guidance it is required that disclosures be provided by classes of assets instead of by major categories of assets. This ASU is effective for the first reporting period beginning after December 15, 2009, except for the requirement to provide fair value hierarchy Level 3 activity of purchases, sales, issuances and settlements on a gross basis, which will be effective for fiscal years

 

24


SIFCO Industries, Inc. and Subsidiaries

Notes to Consolidated Financial Statements — (Continued)

 

beginning on or after December 15, 2010, and for interim periods within those fiscal years. The Company does not expect the adoption of this guidance to have a material impact on its consolidated financial statements and disclosures.

L. USE OF ESTIMATES

Accounting Principles Generally Accepted in the U.S. (“GAAP”) requires management to make a number of estimates and assumptions relating to the reported amounts of assets and liabilities and the disclosure of contingent liabilities, at the date of the consolidated financial statements, and the reported amounts of revenues and expenses during the period in preparing these financial statements. Actual results could differ from those estimates.

M. DERIVATIVE FINANCIAL INSTRUMENTS

The Company has from time-to-time utilized foreign currency exchange contracts as part of the management of its foreign currency risk exposure. The Company has no financial instruments held for trading purposes. All financial instruments are put into place to hedge specific risk exposure. To qualify as a hedge, the item to be hedged must expose the Company to foreign currency risk and the hedging instrument must effectively reduce that risk. If the financial instrument is designated as a cash flow hedge, the effective portions of changes in the fair value of the financial instrument are recorded in accumulated other comprehensive loss in the shareholders’ equity section of the consolidated balance sheets. Ineffective portions of changes in the fair value of the financial instrument, to the extent they may exist, are recognized in the consolidated statements of operations.

Historically, the Company has been able to mitigate the impact of foreign currency risk by means of hedging such risk through the use of foreign currency exchange contracts, which typically expire within one year. However, such risk is mitigated only for the periods for which the Company has foreign currency exchange contracts in effect, and only to the extent of the U.S. dollar amounts of such contracts. At September 30, 2010 and 2009, the Company had no forward exchange contracts outstanding.

N. RESEARCH AND DEVELOPMENT

Research and development costs are expensed as incurred. Research and development expense was approximately $661, $705 and $672 in fiscal 2010, 2009 and 2008, respectively.

O. ACCUMULATED OTHER COMPREHENSIVE LOSS

Comprehensive income is included on the consolidated statements of shareholders’ equity. The components of accumulated other comprehensive loss as shown on the consolidated balance sheets at September 30 are as follows:

 

     2010     2009     2008  

Foreign currency translation adjustment

   $ (5,725   $ (4,646   $ (4,858

Net pension liability adjustment, net of income tax benefit of $3,484, $3,180 and $1,105, respectively

     (5,585     (5,057     (1,815
                        

Total accumulated other comprehensive loss

   $ (11,310   $ (9,703   $ (6,673
                        

P. INCOME TAXES

The Company files a consolidated U.S. federal income tax return and tax returns in various state and local jurisdictions. The Company’s non-U.S. subsidiaries also file tax returns in various jurisdictions, including Ireland, the United Kingdom, France and Sweden. The Company has not provided U. S. deferred income taxes on certain cumulative earnings of non-U.S. subsidiaries that have been reinvested indefinitely. A U.S. deferred income tax provision has been made for the balance of the earnings of the non-U.S. subsidiaries.

The Company accounts for income taxes in accordance with the guidance related to accounting for income taxes, as amended. Deferred income taxes are (i) provided for the temporary difference between the financial reporting basis and tax basis of the Company’s assets and liabilities and (ii) measured using the enacted tax rates that are assumed to be in effect when the differences reverse. Deferred tax assets result principally from recording certain expenses in the financial statements in excess of amounts currently deductible for tax purposes. Deferred tax liabilities result principally from tax depreciation in excess of book depreciation and unremitted foreign earnings.

The Company maintains a valuation allowance against its deferred tax assets when management believes it is more likely than not that all or a portion of a deferred tax asset may not be realized. Changes in valuation allowances are included in the income tax provision in the period of change. In determining whether a valuation allowance is warranted, the Company

 

25


SIFCO Industries, Inc. and Subsidiaries

Notes to Consolidated Financial Statements — (Continued)

 

evaluates factors such as prior earnings history, expected future earnings, carry-back and carry-forward periods and tax strategies that could potentially enhance the likelihood of the realization of a deferred tax asset.

Q. RECLASSIFICATIONS

Certain amounts in prior years may have been reclassified to conform to the 2010 consolidated financial statement presentation.

2. Short-Term Investments

At September 30, 2010, short-term investments consist of corporate debt instruments that are due in less than one year, are intended to be held until maturity and amount to $3,020, which approximates fair value.

3. Inventories

Inventories at September 30 consist of:

 

     2010      2009  

Raw materials and supplies

   $ 1,846       $ 2,539   

Work-in-process

     2,624         2,350   

Finished goods

     1,802         2,679   
                 

Total inventories

   $ 6,272       $ 7,568   
                 

If the FIFO method had been used for the entire Company, inventories would have been $7,495 and $7,320 higher than reported at September 30, 2010 and 2009, respectively.

4. Accrued Liabilities

Accrued liabilities at September 30 consist of:

 

     2010      2009  

Accrued employee compensation and benefits

   $ 1,642       $ 1,764   

Accrued workers’ compensation

     945         1,260   

Accrued utilities

     336         261   

Accrued dividends

     789         529   

Other accrued liabilities

     575         510   
                 

Total accrued liabilities

   $ 4,287       $ 4,324   
                 

5. Government Grants

In previous periods the Company received grants from certain government entities as an incentive to invest in facilities, research and employees. Capital grants are amortized into income over the estimated useful lives of the related assets. Employment grants are amortized into income over five years. The unamortized portion of deferred grant revenue is recorded in other long-term liabilities at September 30, 2010 and 2009, which amounted to $401 and $454, respectively. The majority of the Company’s grants are denominated in Euros. The Company adjusts its deferred grant revenue balance in response to currency exchange rate fluctuations for as long as such grants are treated as obligations.

 

26


SIFCO Industries, Inc. and Subsidiaries

Notes to Consolidated Financial Statements — (Continued)

 

6. Long-Term Debt

Long-term debt at September 30 consists of:

 

     2010      2009  

Revolving credit agreement

   $       $   

Capital lease obligations

     138         248   

Other

     5         7   
                 
     143         255   

Less — current maturities

     108         101   
                 

Total long-term debt

   $ 35       $ 154   
                 

At September 30, 2010, the Company had an $8,000 revolving credit agreement with a bank subject to sufficiency of collateral that expires on January 1, 2012 and bears interest at the bank’s base rate plus 0.50%. The interest rate was 3.25% at both September 30, 2010 and 2009. There was no balance outstanding against the revolving credit agreement in either fiscal 2010 or 2009. A commitment fee of 0.35% is incurred on the unused balance. At September 30, 2010 the Company had $7,955 available under its $8,000 revolving credit agreement. The Company’s revolving credit agreement is secured by substantially all of the Company’s assets located in the U.S. and a guarantee by its U.S. subsidiaries. Under its revolving credit agreement with the bank, the Company is subject to certain customary covenants. These include, without limitation, covenants (as defined) that require maintenance of certain specified financial ratios, including a minimum tangible net worth level and a minimum EBITDA level. The Company was in compliance with all applicable covenants at September 30, 2010.

7. Income Taxes

The components of income from continuing operations before income tax provision are as follows:

 

     Years Ended September 30,  
     2010      2009      2008  

U.S.

   $ 8,045       $ 12,253       $ 8,282   

Non-U.S.

     349         74         538   
                          

Income from continuing operations before income tax provision

   $ 8,394       $ 12,327       $ 8,820   
                          

The income tax provision consists of the following:

 

     Years Ended September 30,  
     2010     2009      2008  

Current income tax provision:

       

U.S. federal

   $ 1,967      $ 3,209       $ 1,550   

U.S. state and local

     320        512         336   

Non-U.S.

     103        150         210   
                         

Total current tax provision

     2,390        3,871         2,096   

Deferred income tax provision (benefit):

       

U.S. federal

     582        423         1,066   

U.S. state and local

     84        161         163   

Non-U.S.

     (24     25         (48
                         

Total deferred tax provision

     642        609         1,181   
                         

Income tax provision

   $ 3,032      $ 4,480       $ 3,277   
                         

 

27


SIFCO Industries, Inc. and Subsidiaries

Notes to Consolidated Financial Statements — (Continued)

 

The income tax provision differs from amounts currently payable or refundable due to certain items reported for financial statement purposes in periods that differ from those in which they are reported for tax purposes. The income tax provision in the accompanying consolidated statements of operations differs from amounts determined by using the statutory rate as follows:

 

     Years Ended September 30,  
     2010     2009     2008  

Income from continuing operations before income tax provision

   $ 8,394      $ 12,327      $ 8,820   

Less-U.S. state and local income tax provision

     404        673        499   
                        

Income from continuing operations before U.S. and non-U.S. federal income tax provision

   $ 7,990      $ 11,654      $ 8,321   
                        

Income tax provision at U.S. federal statutory rates

   $ 2,716      $ 3,979      $ 2,829   

Tax effect of:

      

Business expenses not deductible for tax

     13        (177     27   

Undistributed earnings of non-U.S. subsidiaries

     (18     (91     11   

State and local income taxes

     412        631        499   

Other

     (91     138        (89
                        

Income tax provision

   $ 3,032      $ 4,480      $ 3,277   
                        

Deferred tax assets and liabilities at September 30 consist of the following:

 

     2010     2009  

Deferred tax assets:

    

Net non-U.S. operating loss carryforwards

   $ 645      $ 626   

Employee benefits

     2,331        2,019   

Inventory reserves

     614        705   

Asset impairment reserve

     352        348   

Allowance for doubtful accounts

     158        175   

Foreign tax credits

     3,099        3,055   

Other

     148        59   
                

Total deferred tax assets

     7,347        6,987   
                

Deferred tax liabilities:

    

Depreciation

     (2,810     (2,129

Unremitted foreign earnings

     (4,839     (4,850

Other

     (91       
                

Total deferred tax liabilities

     (7,740     (6,979
                

Net deferred tax liabilities

     (393     8   

Valuation allowance

     (464     (467
                

Net deferred tax liabilities

   $ (857   $ (459
                

At September 30, 2010 the Company has non-U.S. tax loss carryforwards of approximately $6,107. The non-U.S. tax loss carryforwards do not expire.

The Company recognized reductions of the valuation allowance against its net deferred tax assets in fiscal years 2010 and 2009 of $3 and $13, respectively.

 

28


SIFCO Industries, Inc. and Subsidiaries

Notes to Consolidated Financial Statements — (Continued)

 

Cumulative undistributed earnings of non-U.S. subsidiaries for which no U.S. deferred federal income tax liabilities have been established were approximately $1,837 at September 30, 2010. The incremental U.S. federal income tax related to any repatriation of these cumulative foreign earnings is indeterminable currently. The incremental foreign withholding taxes associated with a repatriation of all such earnings would approximate $49.

The Company reported liabilities for uncertain tax positions, which includes any related interest and penalties, in fiscal 2010 and 2009 of $63 and $58, respectively. The Company classifies interest and penalties on uncertain tax positions as income tax expense. A summary of activity related to the Company’s uncertain tax position is as follows:

 

     2010  

Balance at beginning of year

   $ 58   

Increase due to tax positions taken in prior years

     5   
        

Balance at end of year

   $ 63   
        

The Company is subject to income taxes in the U.S. federal jurisdiction, and various state, local and non-U.S. jurisdictions. In 2010, the Internal Revenue Service completed an audit of the Company’s federal income tax return for fiscal 2007, the outcome of which resulted in $92 of additional taxes being owed by the Company. With few exceptions, the Company is no longer subject to U.S. federal, state and local or non-U.S. income tax examinations for the years prior to fiscal year 2002.

8. Retirement Benefit Plans

The Company and certain of its subsidiaries sponsor defined benefit pension plans covering most of its employees. The Company’s funding policy for its defined benefit pension plans is based on an actuarially determined cost method allowable under Internal Revenue Service regulations. One of the Company’s defined benefit pension plans, which plan covers substantially all non-union employees of the Company’s U.S. operations who were hired prior to March 1, 2003, was frozen in 2003. Consequently, although the plan otherwise continues, the plan ceased the accrual of additional pension benefits for service subsequent to March 1, 2003.

Prior to October 1, 2008, the Company used a July 1 measurement date for its defined benefit pension plans. For fiscal 2009, the measurement date changed from July 1 to September 30 as required under the amended guidance from the FASB related to employers’ accounting for defined benefit pension and other postretirement benefit plans. The Company previously adopted the amended guidance of the FASB related to the requirement to recognize the funded status of the Company’s defined benefit pension plans as an asset or liability in the consolidated balance sheet. The net impact, as of October 1, 2008, of the measurement date change was a nominal charge to retained earnings. As of September 30, 2010 and 2009, the Company’s defined benefit pension plans had accumulated benefit obligations of $21,889 and $19,600, respectively. Net pension expense (income) for the Company-sponsored defined benefit pension plans consists of the following:

 

     Years Ended September 30,  
     2010     2009     2008  

Service cost

   $ 302      $ 269      $ 242   

Interest cost

     1,050        1,067        951   

Expected return on plan assets

     (1,411     (1,490     (1,430

Amortization of prior service cost

     142        140        132   

Amortization of net (gain) loss

     537        54        (71
                        

Net pension expense (income) for defined benefit plan

   $ 620      $ 40      $ (176
                        

 

29


SIFCO Industries, Inc. and Subsidiaries

Notes to Consolidated Financial Statements — (Continued)

 

The status of all defined benefit pension plans at September 30 is as follows:

 

     2010     2009  

Benefit obligations:

    

Benefit obligations at beginning of year

   $ 19,600      $ 16,282   

Service cost

     302        337   

Interest cost

     1,050        1,334   

Amendments

            65   

Actuarial loss

     1,486        2,543   

Benefits paid

     (549     (961
                

Benefit obligations at end of year

   $ 21,889      $ 19,600   
                

Plan assets:

    

Plan assets at beginning of year

   $ 15,388      $ 16,704   

Actual return on plan assets

     1,484        (1,094

Employer contributions

     330        739   

Benefits paid

     (549     (961
                

Plan assets at end of year

   $ 16,653      $ 15,388   
                

 

     Plans in which
Assets Exceed Benefit
Obligations at
September 30,
    Plans in which
Benefit Obligations
Exceed Assets at
September 30,
 
     2010      2009     2010     2009  

Reconciliation of funded status:

         

Plan assets in excess of (less than) projected benefit obligations

   $ 910       $ 1,208      $ (6,146   $ (5,420

Amounts recognized in accumulated other comprehensive loss:

         

Net loss (gain)

     344         (49     8,437        7,953   

Prior service cost

     132         225        63        112   
                                 

Net amount recognized in the consolidated balance sheets

   $ 1,386       $ 1,384      $ 2,354      $ 2,645   
                                 

Amounts recognized in the consolidated balance sheets are:

         

Other assets

   $ 910       $ 1,208      $      $   

Other long-term liabilities

                    (6,146     (5,420

Accumulated other comprehensive loss — pretax

     476         176        8,500        8,065   
                                 

Net amount recognized in the consolidated balance sheets

   $ 1,386       $ 1,384      $ 2,354      $ 2,645   
                                 

The amounts in accumulated other comprehensive loss that are expected to be recognized as components of net periodic benefit costs during fiscal 2011 are as follows:

 

     Plans in which
Assets Exceed
Benefit
Obligations
     Plans in which
Benefit
Obligations
Exceed Assets
 

Net loss

   $       $ 699   

Prior service cost

     93         24   
                 

Total

   $ 93       $ 723   
                 

 

30


SIFCO Industries, Inc. and Subsidiaries

Notes to Consolidated Financial Statements — (Continued)

 

Where applicable, the following weighted-average assumptions were used in developing the benefit obligation and the net pension expense for defined benefit pension plans:

 

     Years Ended September 30,  
     2010     2009     2008  

Discount rate for liabilities

     4.9     5.4     6.7

Discount rate for expenses

     5.5     6.6     6.3

Expected return on assets

     8.5     8.7     8.7

The Company classifies and discloses pension plan assets in one of the following three categories: (i) Level 1 — quoted market prices in active markets for identical assets; (ii) Level 2 — observable market based inputs or unobservable inputs that are corroborated by market data or (iii) Level 3 — unobservable inputs that are not corroborated by market data. The following table sets forth the asset allocation of the Company’s defined benefit pension plan assets and summarizes the fair values and levels within the fair value hierarchy for such plan assets as of September 30, 2010:

 

     Asset
Amount
     % Asset
Allocation
    Level 1      Level 2      Level 3  

Funds invested in equity securities:

             

U.S. companies

   $ 8,543         51   $       $ 8,543       $   

Non-U.S. companies

     1,250         8             1,250           
                         

Total equity securities

     9,793         59        

Funds invested in debt securities:

             

U.S. companies

     6,613         40             4,703         1,910   

Non-U.S. companies

     176         1             176           
                         

Total debt securities

     6,789         41        

Other securities

     71         <1     71                   
                                           

Total plan assets at fair value

   $ 16,653         100   $ 71       $ 14,672       $ 1,910   
                                           

Changes in the fair value of the Company’s Level 3 investments during the year ending September 30, 2010 were as follows:

 

     2010  

Balance at beginning of year

   $ 1,654   

Actual return on plan assets

     247   

Purchases and sales of plan assets, net

     10   
        

Balance at end of year

   $ 1,911   
        

Investment objectives relative to the assets of the Company’s defined benefit pension plans are to (i) optimize the long-term return on the plans’ assets while assuming an acceptable level of investment risk, (ii) maintain an appropriate diversification across asset categories and among investment managers, and (iii) maintain a careful monitoring of the risk level within each asset category. Asset allocation objectives are established to promote optimal expected returns and volatility characteristics given the long-term time horizon for fulfilling the obligations of the Company’s defined benefit pension plans. Selection of the appropriate asset allocation for the plans’ assets was based upon a review of the expected return and risk characteristics of each asset category in relation to the anticipated timing of future plan benefit payment obligations. The Company has a long-term strategic objective for the allocation of plan assets. However, the Company realizes that actual allocations at any point in time will likely vary from this strategic objective due principally to (i) the impact of market conditions on plan asset values and (ii) required cash contributions to and distribution from the plans. The “Asset Allocation Range” anticipates this fluctuation and provides flexibility for the investment managers to vary around the objective without a mandatory immediate rebalancing.

 

31


SIFCO Industries, Inc. and Subsidiaries

Notes to Consolidated Financial Statements — (Continued)

 

 

     Strategic
Objective
    Asset
Allocation
Range
 

U.S. equities

     50     30% to 70%   

Non-U.S. equities

     7     0% to 20%   

U.S. debt securities

     42     20% to 70%   

Non-U.S. debt securities

     0     0% to 10%   

Other securities

     1     0% to 60%   
          

Total

     100  
          

External consultants assist the Company with monitoring the appropriateness of the investment strategy and the related asset mix and performance. To develop the expected long-term rate of return assumptions on plan assets, generally the Company uses long-term historical information for the target asset mix selected. Adjustments are made to the expected long-term rate of return assumptions when deemed necessary based upon revised expectations of future investment performance of the overall investments markets.

The Company expects to make contributions of approximately $622 to its defined benefit pension plans during fiscal 2011. The Company has carryover balances from previous periods that may be available for use as a credit to reduce the amount of contributions that the Company is required to make to certain of its defined benefit pension plans in fiscal 2011. The Company’s ability to elect to use such carryover balances will be determined based on the actual funded status of each defined benefit pension plan relative to the plan’s minimum regulatory funding requirements. The following defined benefit payment amounts are expected to be made in the future:

 

Years Ending

September 30,

   Projected
Benefit
Payments
 

2011

   $ 784   

2012

     891   

2013

     2,076   

2014

     1,311   

2015

     1,237   

2016-2020

     7,356   

The Company also contributes to a U.S. multi-employer retirement plan for certain union employees. The Company’s contributions to the plan in 2010, 2009 and 2008 were $44, $57 and $44, respectively.

Substantially all non-union U.S. employees of the Company and its U.S. subsidiaries are eligible to participate in the Company’s U.S. defined contribution plan. The Company makes non-discretionary, regular matching contributions to this plan equal to an amount that represents up to 5% of eligible participant compensation. The Company’s regular matching contribution expense for this defined contribution plan in 2010, 2009 and 2008 was $304, $283 and $273, respectively. This defined contribution plan provides that the Company may also make an additional discretionary matching contribution during those periods in which the Company achieves certain performance levels. The Company’s additional discretionary matching contribution expense in 2010, 2009 and 2008 was $171, $196 and $211, respectively.

The Company’s United Kingdom subsidiary sponsors a defined contribution plan for certain of its employees. The Company contributes annually 5% of eligible employees’ compensation, as defined. Total contribution expense in 2010, 2009 and 2008 was $26, $24 and $19, respectively.

The Company’s Swedish subsidiary sponsors defined contribution plans for its employees. The Company contributes annually a percentage of eligible employees’ compensation, as defined. Total contribution expense in 2010, 2009 and 2008 was $6, $5 and $7, respectively.

 

32


SIFCO Industries, Inc. and Subsidiaries

Notes to Consolidated Financial Statements — (Continued)

 

9. Stock-Based Compensation

In previous periods, the Company awarded stock options under its shareholder approved 1995 Stock Option Plan (“1995 Plan”) and 1998 Long-term Incentive Plan (“1998 Plan”). Under the 1995 Plan, the initial aggregate number of stock options that were available to be granted was 200,000. The aggregate number of stock options that were available to be granted under the 1998 Plan in any fiscal year was limited to 1.5% of the total outstanding common shares of the Company as of September 30, 1998, up to a maximum of 5% of such total outstanding shares, subject to adjustment for forfeitures. As of September 30, 2009, no further options may be granted under either the 1995 Plan or the 1998 Plan. Option exercise price is not less than fair market value on date of grant and options are exercisable no later than ten years from date of grant. Options issued under both plans generally vest at a rate of 25% per year.

Option activity is as follows:

 

     Years Ended September 30,  
     2010     2009     2008  

Options at beginning of year

     92,000        93,250        110,500   

Weighted average exercise price

   $ 4.53      $ 4.60      $ 4.46   

Options reinstated during the year

            2,000          

Weighted average exercise price

   $      $ 3.74      $   

Options exercised during the year

     (32,000     (3,250     (17,250

Weighted average exercise price

   $ 4.90      $ 6.20      $ 3.69   

Options at end of year

     60,000        92,000        93,250   

Weighted average exercise price

   $ 4.33      $ 4.53      $ 4.60   

Options exercisable at end of year

     60,000        92,000        86,750   

Weighted average exercise price

   $ 4.33      $ 4.53      $ 4.67   

As of September 30, 2010 and 2009, there was no unrecognized compensation cost related to the stock options granted under the Company’s stock option plans.

The following table provides additional information regarding options outstanding as of September 30, 2010:

 

Option

Exercise Price

   Options
Outstanding
     Options
Exercisable
     Options
Vested or
Expected

to Vest
 

$ 3.50

     15,000         15,000         15,000   

$ 3.74

     23,000         23,000         23,000   

$ 5.50

     22,000         22,000         22,000   
                          

Total

     60,000         60,000         60,000   
                          

Weighted average remaining term

     3.1 years         3.1 years         3.1 years   

Aggregate intrinsic value

   $ 453       $ 453       $ 453   

Total compensation expense related to stock options recognized in fiscal years 2010, 2009 and 2008 was zero, $3 and $12, respectively. No tax benefit was recognized for this compensation expense.

The Company has also awarded performance shares under its 2007 Long-Term Incentive Plan (“2007 Plan”). The Company adopted the 2007 Plan in fiscal 2008. The aggregate number of shares that may be awarded under the 2007 Plan is 250,000, subject to an adjustment for the forfeiture of any issued shares. In addition, shares that may be awarded are subject to individual award limitations. The shares awarded under the 2007 Plan may be made in multiple forms including stock options, stock appreciation rights, restricted or unrestricted stock, and performance related shares. Any such awards are exercisable no later than ten years from date of grant.

 

33


SIFCO Industries, Inc. and Subsidiaries

Notes to Consolidated Financial Statements — (Continued)

 

The performance shares that have been awarded under the 2007 Plan generally provide for the issuance of the Company’s common shares upon the Company achieving certain defined financial performance objectives during a period up to three years following the making of such award. The ultimate number of common shares of the Company that may be earned pursuant to an award will range from a minimum of no shares to a maximum of 150% of the initial number of performance shares awarded, depending on the level of the Company’s achievement of its financial performance objectives.

Compensation expense is being accrued at (i) 100% of the target levels for recipients of the performance shares awarded during fiscal 2010, (ii) 0% to 50% of the target levels for recipients of the performance shares awarded during fiscal 2009 and (iii) approximately 70% of the target levels for recipients of the performance shares awarded during fiscal 2008. During each future reporting period, such expense may be subject to adjustment based upon the Company’s subsequent estimate of the number of common shares that it expects to issue upon the completion of the performance period. The performance shares were valued at the closing market price of the Company’s common shares on the date of grant, and the vesting of such shares is determined at the end of the performance period. Compensation expense related to all performance shares awarded under the 2007 Plan was $325, $80 and $38 during fiscal 2010, 2009 and 2008, respectively. As of September 30, 2010, 2009 and 2008 there was $389, $85 and $153 of total unrecognized compensation cost related to the performance shares awarded under the 2007 Plan. The Company expects to recognize this cost over the next two (2) years.

The following is a summary of activity related to performance shares:

 

     Number of
Shares
    Weighted
Average Fair
Value at Date
of Grant
 

Outstanding at September 30, 2009

     75,500      $ 8.29   

Performance shares awarded

     36,200        15.75   

Performance shares forfeited

     (4,500     10.33   
                

Outstanding at September 30, 2010

     107,200      $ 10.72   
                

10. Asset Divestiture

Prior to fiscal 2008, the Company and its Irish subsidiary, SIFCO Turbine Components Limited (“SIFCO Turbine”), completed the sale of its industrial turbine engine component repair business, which operated in SIFCO Turbine’s Cork, Ireland facility. Upon completion of this transaction, the Company no longer maintains any operations in Ireland. SIFCO Turbine retained ownership of the Cork, Ireland facility subject to a long-term lease arrangement with the acquirer of the business.

SIFCO Turbine’s Cork, Ireland facility was classified as held for sale in the consolidated balance sheets during fiscal 2008 and up through June 30, 2009. The Company attempted to sell this facility since the beginning of fiscal 2008, with the intention and expectation that it would dispose of this asset within the requisite period of time to allow for classification as an asset held for sale. However, while the Company will continue its effort to sell the facility, due to the current global economic downturn, the Company reassessed it expectations during the fourth quarter of fiscal 2009 and determined that it is more likely than not that it will be unable to sell the Cork, Ireland facility during the next 12 month period. Accordingly, such asset no longer qualifies for classification as held for sale and, at September 30, 2009, this asset was reclassified to property, plant and equipment and included in corporate identifiable assets (see Note 12). As a result of this reassessment, during fiscal 2009, the Company recorded aggregate depreciation expense related to the Cork, Ireland facility of $230, of which $113 related to fiscal 2009 and $117 represented depreciation related to periods prior to fiscal 2009 during which time this asset was classified as held for sale.

In accordance with the guidance as it relates to accounting for the impairment or disposal of long-lived assets, the portion of the Company’s financial results related principally to the activity of leasing the Cork, Ireland facility, which makes up essentially all of SIFCO Turbine’s activity, were reported in fiscal 2009 and 2008 as discontinued operations in the accompanying consolidated statements of operations. Due to the aforementioned reassessment of the status of the Cork, Ireland facility during fiscal 2009, such leasing activity is no longer considered to be a discontinued operation.

 

34


SIFCO Industries, Inc. and Subsidiaries

Notes to Consolidated Financial Statements — (Continued)

 

The financial results included in discontinued operations were as follows:

 

     2009      2008  

Net sales

   $       $   

Income before income tax provision

     247         370   

Income from discontinued operations, net of tax

     188         287   

11. Contingencies

In the normal course of business, the Company may be involved in ordinary, routine legal actions. The Company cannot reasonably estimate future costs, if any, related to these matters and does not believe any such matters are material to its financial condition or results of operations. The Company maintains various liability insurance coverages to protect its assets from losses arising out of or involving activities associated with ongoing and normal business operations; however, it is possible that the Company’s future operating results could be affected by future cost of litigation.

The Company leases various facilities and equipment under capital and operating leases expiring at various dates. The Company recorded rent expense of $546, $544, and $624 in fiscal 2010, 2009 and 2008, respectively. At September 30, 2010, minimum rental commitments under non-cancelable leases are as follows:

 

Year ending September 30,

   Capital
Leases
     Operating
Leases
 

2011

   $ 117       $ 457   

2012

     28         327   

2013

             146   

2014

             128   

Thereafter

             130   
                 

Total minimum lease payments

     145       $ 1,188   
           

Less — amount representing interest

     7      
           

Present value of net minimum lease payments

     138      

Less — current maturities

     106      
           

Long-term capital lease obligation

   $ 32      
           

Amortization of the cost of equipment under capital leases is included in depreciation expense. At September 30, assets recorded under capital leases consist of the following:

 

     2010     2009  

Machinery and equipment

   $ 523      $ 553   

Accumulated depreciation

     (356     (317

 

35


SIFCO Industries, Inc. and Subsidiaries

Notes to Consolidated Financial Statements — (Continued)

 

12. Business Segments

The Company identifies reportable segments based upon distinct products manufactured and services performed. The Aerospace Component Manufacturing Group consists of the production, heat-treatment, surface-treatment, non-destructive testing, and some machining of forged components in various steel alloys utilizing a variety of processes for application principally in the aerospace industry. The Turbine Component Services and Repair Group consists primarily of the repair and remanufacture of small aerospace and industrial turbine engine components. The Repair Group is also involved in precision component machining and industrial coatings for turbine engine applications. The Applied Surface Concepts Group is a provider of specialized selective electrochemical metal finishing processes and services used to apply metal coatings to a selective area of a component. The Company’s reportable segments are separately managed.

One customer of all three of the Company’s segments accounted for 20%, 15% and 13% of the Company’s consolidated net sales in fiscal 2010, 2009 and 2008, respectively. Another customer of all three of the Company’s segments accounted for 12%, 14% and 14% of the Company’s consolidated net sales in fiscal 2010, 2009 and 2008, respectively. The combined net sales to these two customers, and to the direct subcontractors to these two customers, accounted for 54%, 48% and 38% of the Company’s consolidated net sales in 2010, 2009 and 2008, respectively.

Geographic net sales are based on location of customer. The United States of America is the single largest country for unaffiliated customer sales, accounting for 75% of consolidated net sales in each of fiscal 2010, 2009 and 2008. No other single country represents greater than 10% of consolidated net sales in 2010, 2009 and 2008. Net sales to unaffiliated customers located in various European countries accounted for 10%, 9%, and 10% of consolidated net sales in 2010, 2009 and 2008, respectively. Net sales to unaffiliated customers located in various Asian countries accounted for 9%, 11%, and 7% of consolidated net sales in 2010, 2009 and 2008, respectively.

Corporate unallocated expenses represent expenses that are not of a business segment operating nature and, therefore, are not allocated to the business segments for reporting purposes. Corporate identifiable assets consist primarily of cash and cash equivalents, short-term investments and the Company’s Cork, Ireland facility (see Note 10).

 

36


SIFCO Industries, Inc. and Subsidiaries

Notes to Consolidated Financial Statements — (Continued)

 

The following table summarizes certain information regarding segments of the Company’s continuing operations:

 

     Years Ended September 30,  
     2010     2009     2008  

Net sales:

      

Aerospace Component Manufacturing Group

   $ 62,098      $ 68,640      $ 71,980   

Turbine Component Services and Repair Group

     8,933        11,529        14,336   

Applied Surface Concepts Group

     12,239        13,719        15,075   
                        

Consolidated net sales

   $ 83,270      $ 93,888      $ 101,391   
                        

Operating income (loss):

      

Aerospace Component Manufacturing Group

   $ 9,855      $ 13,376      $ 9,892   

Turbine Component Services and Repair Group

     (36     144        (304

Applied Surface Concepts Group

     249        817        1,341   

Corporate unallocated expenses

     (2,153     (1,861     (1,951
                        

Consolidated operating income

     7,915        12,476        8,978   

Interest expense, net

     14        51        125   

Foreign currency exchange loss (gain), net

     (23     217        35   

Other income, net

     (470     (119     (2
                        

Consolidated income from continuing operations before income tax provision

   $ 8,394      $ 12,327      $ 8,820   
                        

Depreciation and amortization expense:

      

Aerospace Component Manufacturing Group

   $ 1,047      $ 809      $ 628   

Turbine Component Services and Repair Group

     335        408        467   

Applied Surface Concepts Group

     403        362        380   

Corporate unallocated expenses

     110        246        8   
                        

Consolidated depreciation and amortization expense

   $ 1,895      $ 1,825      $ 1,483   
                        

LIFO expense (income) for the Aerospace Component Manufacturing Group

   $ 175      $ (1,583   $ 1,712   

Capital expenditures:

      

Aerospace Component Manufacturing Group

   $ 6,094      $ 4,394      $ 1,162   

Turbine Component Services and Repair Group

     174        259        457   

Applied Surface Concepts Group

     479        603        393   
                        

Consolidated capital expenditures

   $ 6,747      $ 5,256      $ 2,012   
                        

Identifiable assets:

      

Aerospace Component Manufacturing Group

   $ 31,617      $ 28,314      $ 30,587   

Turbine Component Services and Repair Group

     4,642        4,566        9,273   

Applied Surface Concepts Group

     6,037        6,225        6,903   

Corporate

     27,354        26,665        13,386   
                        

Consolidated total assets

   $ 69,650      $ 65,770      $ 60,149   
                        

Non-U.S. operations:

      

Net sales

   $ 4,560      $ 4,898      $ 5,373   

Operating income (loss) from continuing operations

     (162     43        593   

Identifiable assets (excluding cash) of continuing operations

     4,286        5,487        2,805   

 

37


SIFCO Industries, Inc. and Subsidiaries

Notes to Consolidated Financial Statements — (Continued)

 

13. Summarized Quarterly Results of Operations (Unaudited)

 

     2010 Quarter Ended  
     Dec. 31      March 31      June 30      Sept. 30  

Net sales

   $ 21,302       $ 19,886       $ 19,481       $ 22,601   

Cost of goods sold

     15,281         15,735         15,188         17,325   

Income before income tax provision

     3,192         1,478         1,507         2,217   

Income tax provision

     1,179         474         523         856   

Net income

     2,013         1,004         984         1,361   

Net income (loss) per share:

           

Basic

     0.38         0.19         0.18         0.26   

Diluted

     0.38         0.19         0.18         0.26   

 

     2009 Quarter Ended  
     Dec. 31      March 31      June 30     Sept. 30  

Net sales

   $ 23,537       $ 25,941       $ 23,548      $ 20,862   

Cost of goods sold

     18,155         19,812         16,517        15,463   

Income from continuing operations before income tax provision

     2,441         3,396         4,101        2,389   

Income tax provision

     903         1,296         1,484        797   

Income from continuing operations

     1,538         2,100         2,617        1,592   

Income (loss) from discontinued operations, net of tax

     92         294         (198       

Net income

     1,630         2,394         2,419        1,592   

Income per share from continuing operations:

          

Basic

     0.29         0.40         0.49        0.30   

Diluted

     0.29         0.40         0.49        0.30   

Income (loss) per share from discontinued operations:

          

Basic

     0.02         0.06         (0.04       

Diluted

     0.02         0.06         (0.04       

Net income per share:

          

Basic

     0.31         0.45         0.46        0.30   

Diluted

     0.31         0.45         0.45        0.30   

 

38


Schedule II

SIFCO Industries, Inc. and Subsidiaries

Valuation and Qualifying Accounts

Years Ended September 30, 2010, 2009 and 2008

(Amounts in thousands)

 

     Balance at
Beginning
of Period
     Additions
(Reductions)
Charged to
Expense
    Additions
(Reductions)
Charged to
Other
Accounts
    Deductions     Balance at
End of
Period
 

Year Ended September 30, 2010

           

Deducted from asset accounts

           

Allowance for doubtful accounts

   $ 633       $ 185      $      $ (236 )    (a)      $582   

Return and allowance reserve

                                    

Inventory obsolescence reserve

     1,319         162               (269 )    (c)      1,212   

Inventory LIFO reserve

     7,320         175                      7,495   

Asset impairment reserve

     933                              933   

Deferred tax valuation allowance

     467         (3                   464   

Accrual for estimated liability

           

Workers’ compensation reserve

     1,260         51               (366 )    (e)      945   

Year Ended September 30, 2009

           

Deducted from asset accounts

           

Allowance for doubtful accounts

   $ 583       $ 195      $ (4   $ (141 )    (a)    $ 633   

Return and allowance reserve

                                    

Inventory obsolescence reserve

     1,061         283               (25 )    (c)      1,319   

Inventory LIFO reserve

     8,903         (1,583                   7,320   

Asset impairment reserve

     981                       (48 )    (d)      933   

Deferred tax valuation allowance

     480         (13                   467   

Accrual for estimated liability

           

Workers’ compensation reserve

     1,107         512               (359 )    (e)      1,260   

Year Ended September 30, 2008

           

Deducted from asset accounts

           

Allowance for doubtful accounts

   $ 603       $ 254      $ (17   $ (257 )    (a)    $ 583   

Return and allowance reserve

     29         13        (24     (18 )    (b)        

Inventory obsolescence reserve

     1,469         86               (494 )    (c)      1,061   

Inventory LIFO reserve

     7,191         1,712                      8,903   

Asset impairment reserve

     318         757               (94 )    (d)      981   

Deferred tax valuation allowance

     516         (36                   480   

Accrual for estimated liability

           

Workers’ compensation reserve

     1,190         250               (333 )    (e)      1,107   

 

(a) Accounts determined to be uncollectible, net of recoveries
(b) Actual returns received
(c) Inventory sold or otherwise disposed
(d) Equipment sold or otherwise disposed
(e) Payment of workers’ compensation claims

 

39


Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

None.

Item 9A. Controls and Procedures

Evaluation of Disclosure Controls and Procedures

As defined in Rule 13a-15(e) under the Securities Exchange Act of 1934 (the “Exchange Act”), disclosure controls and procedures are controls and procedures designed to provide reasonable assurance that information required to be disclosed in reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported on a timely basis, and that such information is accumulated and communicated to management, including the Company’s Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure. The Company’s disclosure controls and procedures include components of the Company’s internal control over financial reporting. In designing and evaluating the disclosure controls and procedures, management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and management is required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures.

Management of the Company, under the supervision and with the participation of the Chief Executive Officer and Chief Financial Officer, carried out an evaluation of the effectiveness of the design and operation of the Company’s disclosure controls and procedures pursuant to Exchange Act Rule 13a-15(e) as of September 30, 2010 (the “Evaluation Date”). Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that, as of the Evaluation Date, the Company’s disclosure controls and procedures were not effective due solely to the material weakness in the Company’s internal control over financial reporting as described below in “Management’s Report on Internal Control over Financial Reporting.” In light of this material weakness, the Company performed additional analysis as deemed necessary to ensure, to the best of its knowledge, that the consolidated financial statements were prepared in accordance with U.S. generally accepted accounting principles. Accordingly, notwithstanding the existence of the material weakness described below, management has concluded that the consolidated financial statements in this Form 10-K fairly present, in all material respects, the Company’s financial position, results of operations and cash flows for the periods presented.

Management’s Report on Internal Control over Financial Reporting

Management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f). Under the supervision of the Chief Executive Officer and Chief Financial Officer, management conducted an evaluation of the effectiveness of the Company’s internal control over financial reporting as of September 30, 2010 based on (i) the framework set forth by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) in “Internal Control-Integrated Framework” and “Internal Control over Financial Reporting — Guidance for Smaller Public Companies” and (ii) The U.S. Securities and Exchange Commission (“SEC”) Guidance Regarding Management’s Report on Internal Control Over Financial Reporting. Based on that evaluation, management has concluded that the Company did not maintain effective internal control over financial reporting solely as a result of the following material weakness:

 

   

Missing and/or ineffective controls were noted in the area of the Company’s management information systems related principally to (i) logical access/security, (ii) program change management and (iii) segregation of duties. While none of the individual deficiencies noted in these areas appear to rise to the level of a material weakness, based on the nature and interrelationship of the noted deficiencies, management believes that such deficiencies, when considered in the aggregate, do create a reasonable possibility that a material misstatement to the Company’s financial statements could occur and not be detected in a timely manner and, therefore, a material weakness in internal controls over financial reporting does exist as of September 30, 2010.

This annual report does not include an attestation report of the Company’s registered public accounting firm regarding controls over financial reporting. Management’s report was not subject to attestation by the Company’s registered public accounting firm pursuant to rules of the SEC that permit smaller reporting companies to provide only management’s report in this annual report.

Changes in Internal Control over Financial Reporting and other Remediation

The noted material weaknesses in the effectiveness of the Company’s internal controls with respect to its existing management information system (i.e. logical access/security, program change management and segregation of duties) were not all remediated at this time because Company management believes that (i) the relevant risk associated with not

 

40


remediating such controls at this time is not deemed to be “high” and (ii) the cost/benefit analysis does not justify remediating such controls at this time given the fact that the Company is in the process of completing the implementation of a new management information system (implementation expected to be completed in the next three months) and plans to incorporate the remediation of a majority of the deficiencies noted above as part of the new management information system.

There was no significant change in our internal control over financial reporting that occurred during the fourth fiscal quarter ended September 30, 2010 that has materially affected, or that is reasonably likely to materially affect our internal control over financial reporting.

Item 9B. Other Information

None.

PART III

Item 10. Directors, Executive Officers and Corporate Governance

The following table sets forth certain information regarding the executive officers of the Company.

 

Name

     Age     

Title and Business Experience

Jeffrey P. Gotschall

     62      Chairman of the Board since 2001; director of the Company since 1986; Chief Executive Officer from 1990 to August 2009; President from 1989 to 2002; Chief Operating Officer from 1986 to 1990; Executive Vice President from 1986 to 1989; and from 1985 to 1989, President of SIFCO Turbine Component Services.

Michael S. Lipscomb

     64      President and Chief Executive officer since August 2009 and a director of the Company since April 2010. Mr. Lipscomb previously served as a director of the Company from 2002 to 2006. Mr. Lipscomb is also currently the Chief Executive Officer of Aviation Component Solutions. Prior to joining the Company, Mr. Lipscomb was Chairman, President and Chief Executive Officer of Argo-Tech Corporation from 1994 to 2007, President from 1990 to 1994, Executive V.P. and Chief Operating Officer from 1988 to 1990, and Vice President of Operations from 1986, when Argo-Tech was formed, to 1988. Mr. Lipscomb joined TRW’s corporate staff in 1981 and was appointed Director of Operations for the Power Accessories Division in 1985. Mr. Lipscomb previously served as a director of Argo-Tech and AT Holdings Corporation from 1990 to 2007. He serves on the boards of Ruhlin Construction Company and Altra Holdings, Inc. He is a former board member of the Aerospace Industries Association and General Aviation Manufacturers Association.

James P. Woidke

     48      Chief Operating Officer since March 2010. Prior to the assumption of his new role, Mr. Woidke served as General Manager of SIFCO’s Aerospace Component Manufacturing Group since March, 2006. Prior to joining the Company, Mr. Woidke was the Director of Engineering and Quality as well as Business Unit Manager for Anchor Manufacturing Group from 2003 to 2006. From 1993 to 2003, Mr. Woidke held a number of different positions with Lake Erie Screw Corporation, last serving as Director of Manufacturing Operations. Mr. Woidke currently serves on the board of Forging Industry Educational and Research Foundation (FIERF).

Frank A. Cappello

     52      Vice President-Finance and Chief Financial Officer since 2000. Prior to joining the Company, Mr. Cappello was employed by ASHTA Chemicals Inc, a commodity chemical manufacturer, from August 1990 to December 1991 and from June 1992 to February 2000, last serving as Vice President Finance and Administration and Chief Financial Officer; and previously by KPMG LLP, last serving as a Senior Manager in its Assurance Group.

 

41


The Company incorporates herein by reference the information required by this Item as to the Directors, procedures for recommending Director nominees and the Audit Committee appearing under the captions “Proposal to Elect Seven (7) Directors”, “Section 16(a) Beneficial Ownership Reporting Compliance” and “Corporate Governance and Board of Director Matters” of the Company’s definitive Proxy Statement to be filed with the SEC on or about December 15, 2010.

The Directors of the Company are elected annually to serve for one-year terms or until their successors are elected and qualified.

The Company has adopted a Code of Ethics within the meaning of Item 406(b) of Regulation S-K under the Securities Exchange Act of 1934, as amended. The Code of Ethics is applicable to, among other people, the Company’s Chief Executive Officer, Chief Operating Officer, Chief Financial Officer, who is the Company’s Principal Financial Officer, and to the Corporate Controller, who is the Company’s Principal Accounting Officer. The Company’s Code of Ethics is available on its website: www.sifco.com.

Item 11. Executive Compensation

The Company incorporates herein by reference the information appearing under the captions “Compensation Discussion and Analysis”, “Executive Compensation”, “Compensation Committee Report”, “Compensation Committee Interlocks and Insider Participation” and “Director Compensation” of the Company’s definitive Proxy Statement to be filed with the SEC on or about December 15, 2010.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The following table sets forth information regarding Common Shares to be issued under the Company’s equity compensation plans as of September 30, 2010.

 

Plan Category

   Number of
Securities to
be issued
upon
Exercise of
Outstanding
Options
     Number of
Securities to
be issued
upon
Meeting
Performance
Objectives
     Weighted-
Average
Exercise
Price of
Outstanding
Options
     Number of
Securities
Remaining
Available for
Future
Issuance
Under Equity
Compensation
Plans
 

Equity compensation plans approved by security holders:

           

1998 Long-term Incentive Plan(1)

     37,000               $ 4.69           

1995 Stock Option Plan(2)

     23,000                 3.74           

2007 Long-term Incentive Plan(3)

             107,200         N/A         142,800   
                                   

Total

     60,000         107,200       $ 4.33         142,800   
                                   

 

(1) Under the 1998 Long-term Incentive Plan the aggregate number of stock options that were available to be granted in any fiscal year was limited to 1.5% of the total outstanding Common Shares of the Company at September 30, 1998, up to a cumulative maximum of 5% of such total outstanding shares, subject to adjustment for forfeitures. No further options may be granted under this plan. During fiscal 2010, 30,000 options granted under the 1998 Long-term Incentive Plan were exercised.
(2) Under the 1995 Stock Option Plan the aggregate number of stock options that were available to be granted was 200,000. No further options may be granted under this plan. During 2010, 2,000 options granted under the 1995 Stock Option Plan were exercised.
(3) Under the 2007 Long-term Incentive Plan the aggregate number of common shares that are available to be granted is 250,000 shares, with a further limit of no more than 50,000 shares to any one person in any twelve-month period.

 

42


For additional information concerning the Company’s equity compensation plans, refer to the discussion in Note 9 to the Consolidated Financial Statements.

The Company incorporates herein by reference the beneficial ownership information appearing under the captions “Stock Ownership of Certain Beneficial Owners” and “Stock Ownership of Executive Officers, Director and Nominees” of the Company’s definitive Proxy Statement to be filed with the SEC on or about December 15, 2010.

Item 13. Certain Relationships and Related Transactions, and Director Independence

The Company incorporates herein by reference the information required by this item appearing under the captions “Corporate Governance and Board of Director Matters” of the Company’s definitive Proxy Statement to be filed with the SEC on or about December 15, 2010.

Item 14. Principal Accounting Fees and Services

The Company incorporates herein by reference the information required by this item appearing under the caption “Principal Accounting Fees and Services” of the Company’s definitive Proxy Statement to be filed with the SEC on or about December 15, 2010.

PART IV

Item 15. Exhibits, Financial Statement Schedules

(a) (1) Financial Statements:

The following Consolidated Financial Statements; Notes to the Consolidated Financial Statements and the Report of Independent Registered Public Accounting Firm are included in Item 8.

Report of Independent Registered Public Accounting Firm

Consolidated Statements of Operations for the Years Ended September 30, 2010, 2009 and 2008

Consolidated Balance Sheets — September 30, 2010 and 2009

Consolidated Statements of Cash Flows for the Years Ended September 30, 2010, 2009 and 2008

Consolidated Statements of Shareholders’ Equity for the Years Ended September 30, 2010, 2009 and 2008

Notes to Consolidated Financial Statements — September 30, 2010, 2009 and 2008

(a) (2) Financial Statement Schedules:

The following financial statement schedule is included in Item 8:

Schedule II — Valuation and Qualifying Accounts

All other schedules for which provision is made in the applicable accounting regulations of the Securities and Exchange Commission are not required under the related regulations, are inapplicable, or the information has been included in the Notes to the Consolidated Financial Statements.

(a)(3) Exhibits:

The following exhibits are filed with this report or are incorporated herein by reference to a prior filing in accordance with Rule 12b-32 under the Securities and Exchange Act of 1934. (Asterisk denotes exhibits filed with this report)

 

Exhibit
No.

  

Description

  3.1    Third Amended Articles of Incorporation of SIFCO Industries, Inc., filed as Exhibit 3(a) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference

 

43


Exhibit
No.

  

Description

  3.2    SIFCO Industries, Inc. Amended and Restated Code of Regulations dated January 29, 2002, filed as Exhibit 3(b) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference
  4.1    Amended and Restated Credit Agreement Between SIFCO Industries, Inc. and National City Bank dated April 30, 2002, filed as Exhibit 4(b) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference
  4.2    Consolidated Amendment No. 1 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated November 26, 2002 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.5 of the Company’s Form 10-K dated September 30, 2002, and incorporated herein by reference
  4.3    Consolidated Amendment No. 2 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated February 13, 2003 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.6 of the Company’s Form 10-Q dated December 31, 2002, and incorporated herein by reference
  4.4    Consolidated Amendment No. 3 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated May 13, 2003 between SIFCO Industries Inc. and National City Bank, filed as Exhibit 4.7 of the Company’s Form 10-Q dated March 31, 2003, and incorporated herein by reference
  4.5    Consolidated Amendment No. 4 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated July 28, 2003 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.8 of the Company’s Form 10-Q dated June 30, 2003, and incorporated herein by reference
  4.6    Consolidated Amendment No. 5 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated November 26, 2003 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.9 of the Company’s Form 10-K dated September 30, 2003, and incorporated herein by reference
  4.7    Amendment No. 6 to Amended and Restated Credit Agreement dated March 31, 2004 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.10 of the Company’s Form 10-Q dated March 31, 2004, and incorporated herein by reference
  4.8    Consolidated Amendment No. 7 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note dated May 14, 2004 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.11 of the Company’s Form 10-Q dated March 31, 2004, and incorporated herein by reference
  4.9    Consolidated Amendment No. 8 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note effective June 30, 2004 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.12 of the Company’s Form 10-Q dated June 30, 2004, and incorporated herein by reference
  4.10    Consolidated Amendment No. 9 to Amended and Restated Credit Agreement, Amended and Restated Reimbursement Agreement and Promissory Note effective November 12, 2004 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.13 to the Company’s Form 10-K dated September 30, 2004, and incorporated herein by reference
  4.11    Amendment No. 10 to Amended and Restated Credit Agreement dated as of February 4, 2005 but effective as of December 31, 2004 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.14 to the Company’s Form 10-Q dated December 31, 2004, and incorporated herein by reference
  4.12    Amendment No. 11 to Amended and Restated Credit Agreement dated May 19, 2005 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.15 to the Company’s Form 10-Q/A dated March 31, 2005, and incorporated herein by reference

 

44


Exhibit
No.

  

Description

  4.13    Amendment No. 12 to Amended and Restated Credit Agreement dated August 10, 2005 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.16 to the Company’s Form 10-Q dated June 30, 2005, and incorporated herein by reference
  4.14    Amendment No. 13 to Amended and Restated Credit Agreement dated November 23, 2005 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.19 to the Company’s Form 10-K dated September 30, 2005, and incorporated herein by reference
  4.15    Amendment No. 14 to Amended and Restated Credit Agreement dated February 10, 2006 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.20 to the Company’s Form 10-Q dated December 31, 2005, and incorporated herein by reference
  4.16    Amendment No. 15 to Amended and Restated Credit Agreement dated August 14, 2006 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.21 to the Company’s Form 10-Q dated June 30, 2006, and incorporated herein by reference
  4.17    Amendment No. 16 to Amended and Restated Credit Agreement dated November 29, 2006 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.22 to Company’s Form 10-K dated September 30, 2006, and incorporated herein by reference.
  4.18    Amendment No. 17 to Amended and Restated Credit Agreement dated February 5, 2007 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.23 to the Company’s Form 10-Q dated December 31, 2006 and incorporated herein by reference
  4.19    Amendment No. 18 to Amended and Restated Credit Agreement dated May 10, 2007 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.24 to the Company’s Form 10-Q dated March 31, 2007 and incorporated herein by reference
  4.20    Amendment No. 19 to Amended and Restated Credit Agreement dated February 8, 2008 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.20 to the Company’s Form 10-Q dated December 31, 2007 and incorporated herein by reference
  4.21    Amendment No. 20 to Amended and Restated Credit Agreement dated December 12, 2008 between SIFCO Industries, Inc. and National City Bank, filed as Exhibit 4.21 to the Company’s Form 10-K dated September 30, 2008 and incorporated herein by reference
  4.22    Amendment No. 21 to Amended and Restated Credit Agreement dated February 10, 2010 between SIFCO Industries, Inc. and PNC Bank, National Association (successor to National City Bank), filed as Exhibit 4.22 to the Company’s Form 10-Q dated December 31, 2009 and incorporated herein by reference
  9.1    Voting Trust Agreement dated January 30, 2007, filed as Exhibit 9.3 of the Company’s Form 10-Q dated December 31, 2006, and incorporated herein by reference
  9.2    Voting Trust Extension Agreement (effectively) dated January 31, 2010, filed as Exhibit 9.2 of the Company’s Form 10-Q dated December 31, 2009, and incorporated herein by reference
10.1    SIFCO Industries, Inc. 1998 Long-term Incentive Plan, filed as Exhibit 10.3 of the Company’s Form 10-Q dated June 30, 2004, and incorporated herein by reference
10.2    SIFCO Industries, Inc. 1995 Stock Option Plan, filed as Exhibit 10(d) of the Company’s Form 10-Q dated March 31, 2002, and incorporated herein by reference
10.3    Change in Control Severance Agreement between the Company and Frank Cappello, dated September 28, 2000, filed as Exhibit 10(g) of the Company’s Form 10-Q/A dated December 31, 2000, and incorporated herein by reference

 

45


Exhibit
No.

  

Description

10.4    Change in Control Severance Agreement between the Company and Remigijus Belzinskas, dated September 28, 2000, filed as Exhibit 10(i) of the Company’s Form 10-Q/A dated December 31, 2000, and incorporated herein by reference
10.5    Separation Pay Agreement between Frank A. Cappello and SIFCO Industries, Inc. dated December 16, 2005, filed as Exhibit 10.14 of the Company’s Form 10-K dated September 30, 2005, and incorporated herein by reference
10.6    Agreement for the Purchase of the Assets of the Large Aerospace Business of SIFCO Turbine Components Limited dated March 16, 2006 between SIFCO Turbine Components Limited, SIFCO Industries, Inc, and SR Technics Airfoil Services Limited, as amended on April 19, 2006, May 2, 2006, May 5, 2006, May 9, 2006, and May 10, 2006, filed as Exhibit 10.15 of the Company’s Form 10-Q dated March 31, 2006, and incorporated herein by reference
10.7    Amendment No. 1 to Change in Control Severance Agreement between the Company and Frank Cappello, dated February 5, 2007, filed as Exhibit 10.17 of the Company’s Form 10-Q dated December 31, 2006 and incorporated herein by reference
10.8    Amendment No. 1 to Change in Control Severance Agreement between the Company and Remigijus Belzinskas, dated February 5, 2007, filed as Exhibit 10.18 of the Company’s Form 10-Q dated December 31, 2006 and incorporated herein by reference
10.9    Business Purchase Agreement dated as of May 7, 2007 between PAS Technologies Inc. (Parent), PAS Turbines Ireland Limited (Buyer), SIFCO Industries Inc. (Shareholder), and SIFCO Turbine Components Limited (Company), filed as Exhibit 10.19 of the Company’s Form 10-Q dated June 30, 2007 and incorporated herein by reference
10.10    SIFCO Industries, Inc. 2007 Long-Term Incentive Plan, filed as Exhibit A of the Company’s Proxy and Notice of 2008 Annual Meeting to Shareholders dated December 14, 2007, and incorporated herein by reference
10.11    Letter Agreement between the Company and Jeffrey P. Gotschall, dated August 12, 2009 filed as Exhibit 10.1 of the Company’s Form 8-K dated August 12, 2009 and incorporated herein by reference
10.12    Interim Chief Executive Officer Agreement, dated as of August 31, 2009, by and among SIFCO Industries, Inc., Aviation Component Solutions and Michael S. Lipscomb and incorporated herein by reference
10.13    Amended and Restated Change in Control and Severance Agreement, between James P. Woidke and SIFCO Industries, Inc., dated April 27, 2010 filed as Exhibit 10.15 of the Company’s Form 8-K dated April 30, 2010, and incorporated herein by reference
14.1    Code of Ethics, filed as Exhibit 14.1 of the Company’s Form 10-K dated September 30, 2003, and incorporated herein by reference
*21.1    Subsidiaries of Company
*23.1    Consent of Independent Registered Public Accounting Firm
*31.1    Certification of Chief Executive Officer pursuant to Rule 13a-14(a) / 15d-14(a)
*31.2    Certification of Chief Financial Officer pursuant to Rule 13a-14(a) / 15d-14(a)
*32.1    Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350
*32.2    Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350

 

46


SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

SIFCO Industries, Inc.
By:   /s/ Frank A. Cappello
 

    Frank A. Cappello

    Vice President-Finance and

    Chief Financial Officer

    (Principal Financial Officer)

    Date: December 15, 2010

Pursuant to the requirements of the Securities Exchange Act of 1934, this Annual Report has been signed below on December 15, 2010 by the following persons on behalf of the Registrant in the capacities indicated.

 

/s/ Jeffrey P. Gotschall     /s/ Michael S. Lipscomb

    Jeffrey P. Gotschall

    Chairman of the Board

   

    Michael S. Lipscomb

    President and Chief Executive Officer

    (Principal Executive Officer)

    Director

/s/ Alayne L. Reitman     /s/ Mark J. Silk

    Alayne L. Reitman

    Director

   

    Mark J. Silk

    Director

/s/ Hudson D. Smith     /s/ Donald C. Molten, Jr.
    Hudson D. Smith         Donald C. Molten, Jr.
    Director         Director
/s/ Frank N. Nichols     /s/ Frank A. Cappello
    Frank N. Nichols         Frank A. Cappello
    Director         Vice President-Finance and
        Chief Financial Officer
        (Principal Financial Officer)
/s/ Remigijus H. Belzinskas      
    Remigijus H. Belzinskas    
    Corporate Controller    
    (Principal Accounting Officer)    

 

47