Use these links to rapidly review the document
TABLE OF CONTENTS
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.
PART IV

Table of Contents

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

---

Form 10-K

Commission file number 1-31429

---

Valmont Industries, Inc.
(Exact name of registrant as specified in its charter)

(402) 963-1000
(Registrant's telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

         Indicate by check mark whether the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ý    No o

         Indicate by check mark whether the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Exchange Act. Yes o    No ý

         Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Sections 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý    No o

         Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). o Yes    o No

         Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ý

         Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of "large accelerated filer," "accelerated filer," and "smaller reporting company" in Rule 12b-2 of the Exchange Act. (Check one):

         Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o    No ý

         At February 8, 2010 there were 26,284,789 of the Company's common shares outstanding. The aggregate market value of the voting stock held by non-affiliates of the Company based on the closing sale price the common shares as reported on the New York Stock Exchange on June 26, 2009 was $1,864,875,000.

DOCUMENTS INCORPORATED BY REFERENCE

         Portions of the Company's proxy statement for its annual meeting of shareholders to be held on April 27, 2010 (the "Proxy Statement"), to be filed within 120 days of the fiscal year ended December 26, 2009, are incorporated by reference in Part III.

---

Table of Contents

VALMONT INDUSTRIES, INC.
Annual Report Pursuant to Section 13 or 15(d)
of the Securities Exchange Act of 1934
For the fiscal year ended December 26, 2009

TABLE OF CONTENTS

2

---

Table of Contents

PART I

ITEM 1.    BUSINESS.

(a)   General Description of Business

General

        We are a diversified global producer of fabricated metal products and are a leading producer of steel and aluminum pole and tower structures in our Engineered Support Structures (ESS) segment, steel and concrete pole structures in our Utilities Support Structures (Utility) segment and are a global producer of mechanized irrigation systems in our Irrigation segment. We also provide metal coating services, including galvanizing, painting and anodizing in our Coatings business. Our pole and tower structures sold through the ESS segment support outdoor lighting and traffic control fixtures and wireless communication equipment. Our pole structures sold through our Utility segment support electrical transmission and distribution lines and related power distribution equipment. Our irrigation segment produces mechanized irrigation equipment that delivers water, chemical fertilizers and pesticides to agricultural crops. Customers and end-users of our products include state and federal governments, contractors, utility and telecommunications companies, manufacturers of commercial lighting fixtures and large farms as well as the general manufacturing sector. In 2009, approximately 25% our total sales were either sold in markets or produced by our manufacturing plants outside of North America. We were founded in 1946, went public in 1968 and our shares trade on the New York Stock Exchange (ticker: VMI).

Business Strategy

        Our strategy is to pursue growth opportunities that leverage our existing product portfolio, knowledge of our principal end-markets and customers and engineering capability to increase our sales, earnings and cash flow, including:

        Increasing the Market Penetration of our Existing Products.    Our strategy is to increase our market penetration by differentiating our products from our competitors' products through superior customer service, technological innovation and consistently high quality. For example, in recent years, our Utility segment increased its sales through our engineering capability, effective coordination of our production capacity and strong customer service to meet our customers' requirements, especially on large, complex projects.

        Bringing our Existing Products to New Markets.    Our strategy is to expand the sales of our existing products into geographic areas where we do not currently have a strong presence as well as into applications for which end-users do not currently purchase our products. In 2009, our Utility business successfully expanded into new markets in Africa. In recent years, for example, we have been expanding our geographic presence in Europe and North Africa for lighting structures. Our strategy of building a manufacturing base in China was based primarily on expanding our offering of pole structures for lighting, utility and wireless communication applications to the Chinese market. In 2008, we acquired Stainton Metal Co, Ltd. (Stainton), a manufacturer of lighting structures in England. We acquired Stainton to expand our geographic presence in the United Kingdom and acquire a leading market position in one of the largest economies in the world.

        Developing New Products for Markets that We Currently Serve.    Our strategy is to grow by developing new products for markets where we have a comprehensive understanding of end-user requirements and longstanding relationships with key distributors and end-users. For example, we developed and sold structures for tramway applications in Europe in 2005 and 2006. The customers for this product line include many of the state and local governments that purchase our lighting structures.

3

---

Table of Contents

The Tehomet acquisition that we completed in 2007 also helps us to bring Tehomet decorative product concepts to our current customer base.

        Developing New Products for New Markets to Further Diversify our Business.    Our strategy is to increase our sales and diversify our business by developing new products for new markets. For example, we have been expanding our offering of specialized decorative lighting poles in the U.S. The decorative lighting market has different customers than our traditional markets and the products to serve that market are different than the poles we manufacture for the transportation and commercial markets.

Acquisitions

        We have grown internally and by acquisition. Our significant business expansions during the past five years include:

        2007

•

Acquisition of 70% of the outstanding shares of a lighting structure manufacturer headquartered in Kangasniemi, Finland



•

Acquisition of certain assets of a galvanizing operation located in Salina, Kansas

        2008

•

Acquisition of 70% of the outstanding shares of a lighting structure manufacturer headquartered in Canada



•

Acquisition of the assets of a manufacturer of utility and wireless communication poles in Hazelton, Pennsylvania



•

Acquisition of the assets of a wireless communication components distributor headquartered on Long Island, New York



•

Acquisition of the assets of a materials analysis, testing and inspection services business in Pittsburgh, Pennsylvania



•

Formation of a 51% owned joint venture to manufacture steel structures in Turkey



•

Acquisition of the assets of a hot-dipped galvanizing operation located near Louisville, Kentucky



•

Acquisition of a steel lighting structure manufacturer located in England

        There have been no significant divestitures of businesses in the past five years. In the fourth quarter of 2007, we consolidated operations in our North American Specialty Structures product line, which includes the closure of our sign structure facility in Selbyville, Delaware. In 2008, we sold our European machine tool accessories operation. The impact of these events on our financial statements was not significant.

(b)   Operating Segments

        We aggregate our operating segments into four reportable segments. We base our aggregation on similarity of operating segments as to economic characteristics, products, production processes, types or classes of customer and the methods of distribution. In the fourth quarter of 2009, we reorganized our management structure and redefined our Utility segment to include Utility support structure activities on a global basis. Previously, sales of utility support structures outside of North America were reported as part of the ESS segment. We believe this management structure change will help us better serve the global utility support structure market. Information presented for 2007 and 2008 have been reclassified to conform to the 2009 presentation.

4

---

Table of Contents

        Our reportable segments are as follows:

        Engineered Support Structures:    This segment consists of the manufacture of engineered metal structures and components for the global lighting and traffic and wireless communication industries;

        Utility Support Structures:    This segment consists of the manufacture of engineered steel and concrete structures for the global utility industry;

        Coatings:    This segment consists of galvanizing, anodizing and powder coating services; and

        Irrigation:    This segment consists of the manufacture of agricultural irrigation equipment and related parts and services.

        Other:    In addition to these four reportable segments, we have other operations and activities that individually are not more than 10% of consolidated sales. These activities include the manufacture of tubular products for a variety of industrial customers and the distribution of industrial fasteners. In early 2008, we divested of our machine tool accessories operation.

        Amounts of revenues, operating income and total assets attributable to each segment for each of the last three years is set forth in Note 18 of our consolidated financial statements beginning on page 70.

(c)   Narrative Description of Business

        Information concerning the principal products produced and services rendered, markets, competition and distribution methods for each of our four reportable segments is set forth below.

Engineered Support Structures Segment:

        The Engineered Support Structures (ESS) segment manufactures and markets engineered metal structures in two broad product lines:

        (1)   Lighting and Traffic

        Products Produced—This product line primarily includes steel and aluminum poles and structures to which lighting and traffic control fixtures are attached for a wide range of outdoor lighting applications, such as streets, highways, parking lots, sports stadiums and commercial and residential developments. The demand for these products is driven by commercial and residential construction and by consumers' desire for well-lit streets, highways, parking lots and common areas to help make these areas safer at night and to support trends toward more active lifestyles and 24-hour convenience. In addition to safety, customers want products that are visually appealing. In Europe, we believe we are a leader in decorative lighting poles, which are attractive as well as functional. We are leveraging this expertise to expand our decorative product sales in North America and China. Traffic poles are structures to which traffic signals are attached and aid the orderly flow of automobile traffic. While standard designs are available, poles are often engineered to customer specifications to ensure the proper function and safety of the structure. Product engineering takes into account factors such as weather (e.g. wind, ice) and the products loaded on the structure (e.g. lighting fixtures, traffic signals, signage) to determine the design of the pole.

        Markets—The key markets for our lighting and traffic products are the transportation and commercial lighting markets. The transportation market includes street and highway lighting and traffic control, much of which is driven by government spending programs. For example, the U.S. government funds highway and road improvement through the Federal highway program. This program provides funding to improve the nation's roadway system, which includes roadway lighting and traffic control enhancements. Matching funding from the various states may be required as a condition of federal

5

---

Table of Contents

funding. The current highway program is now expired and operating under extensions issued by Congress and we do not expect that the next multi-year highway spending program will be enacted until at least 2011. In the United States, economic stimulus legislation was enacted in response to a weak U.S. economy. Part of that stimulus package resulted in increased infrastructure spending, including road and highway construction. However, we do not believe this legislation resulted in a significant increase in demand for lighting and traffic structures. In North America, governments desire to improve road and highway systems by reducing traffic congestion. In the United States, there are approximately 4 million miles of public roadways, with approximately 24% carrying over 80% of the traffic. Accordingly, the need to improve traffic flow through traffic controls and lighting is a priority for many communities. Transportation markets in other areas of the world are also heavily funded by local and national governments.

        The commercial lighting market is mainly funded privately and includes lighting for applications such as parking lots, shopping centers, sports stadiums and business parks. The commercial lighting market is driven by macro economic factors such as general economic growth rates, interest rates and the commercial construction economy.

        Competition—Our competitive strategy in the Lighting and Traffic product line is to provide high value to the customer at a reasonable price. We compete on the basis of product quality, high levels of customer service and reliable, timely delivery of the product. There are numerous competitors in the U.S., most of which are relatively small companies. Companies compete on the basis of price, product quality, reliable delivery and unique product features. Some competitors offer decorative products, which not all competitors are capable of manufacturing.

        These competitive factors also apply to European markets. There are many competitors in the European market, as most countries have several manufacturers of lighting and traffic poles, many of which compete primarily on the basis of price and local product specifications. In the Chinese market, there are a large number of local competitors, many of which are small companies who use pricing as their main strategy, especially for standard lighting poles. In China, we are most competitive in markets where product and service quality are highly valued or in products that require significant engineering content.

        Distribution Methods—Transportation market sales are generally through independent, commissioned sales agents. These agents represent Valmont as well as lighting fixture companies and sell other related products. Sales are typically to electrical distributors, who provide the pole, fixtures and other equipment to the end user as a complete package. Commercial lighting sales are normally made through Valmont sales employees, who work on a salary plus incentive, although some sales are made through independent, commissioned sales agents. Sales to the commercial lighting market are primarily to lighting fixture manufacturers, who package the pole and fixture for customers.

        (2)   Specialty

        Products Produced—Our Specialty product line includes the manufacture and distribution of a broad range of structures (poles and towers) and components serving the wireless communication market. Specialty products also include special use structures for a variety of applications.

        In the wireless communication market, a wireless communication cell site will mainly consist of a steel pole or tower, shelter (enclosure where the radio equipment is located), antennas (devices that receive and transmit data and voice information to and from wireless communication devices) and components (items that are used to mount antennas to the structure and connect cabling and other parts from the antennas to the shelter).

6

---

Table of Contents

        For a given cell site, we provide poles, towers and components. We offer a wide range of structures to our customers, including solid rod, tubular and guyed towers, poles (tapered and non-tapered) and disguised products to minimize the visual impact of an antenna on an area.

        Structures are engineered and designed to customer specifications, which include factors such as the number of antennas on the structure and wind and soil conditions. Due to the size of these structures, design is important to ensure each structure meets performance and safety specifications. We do not provide any significant installation services on the structures we sell.

        Markets—The main market for our specialty products has been the wireless telephone industry, although we also sell products to state and federal governments for two-way radio communication, radar, broadcasting and security purposes. Over the past number of years, the main market driver has been the growth of subscribers to wireless telephone services. The number of wireless phone subscribers has increased substantially worldwide. The number of cell phone subscribers in the U.S. has grown substantially, as cellular telephone technology has become commonplace worldwide. In general, as the number of users and the usage of wireless devices by these users increase, more cell sites and, accordingly, more structures, antennas and components should be needed. We believe long-term growth should be driven by subscriber growth (although at a lower rate of growth than the past), increased usage, technologies, such as 3G (the third generation of wireless technology), and demand for improved emergency response systems, as part of the U.S. Homeland Security initiatives.

        The two broad customer groups for our specialty products are wireless carriers, (companies that provide wireless services to subscribers) and build-to-suit (BTS) companies (organizations that own cell sites and attach antennas from multiple carriers to the pole or tower structure). BTS companies generate rental revenue from the wireless carriers who use those cell sites.

        Infrastructure costs can be substantial for these customers, so access to capital is important to their ability to fund future infrastructure needs. Accordingly, their infrastructure spending on network development has been cyclical. We believe that infrastructure spending will grow moderately in the future, in order to improve and maintain service levels demanded by users. We also believe that increased subscriber utilization of wireless devices will lead to an increase in the number of cell sites.

        Competition—There are a number of competitors in the wireless communication market in the U.S. We compete on the basis of product quality, service quality and design capability, although we must also remain price competitive to gain orders. We also face a number of competitors when we compete for sign structure sales, most of which compete on a regional basis.

        Distribution Methods—Sales and distribution activities are handled through a combination of a direct sales force and commissioned agents.

Utility Support Structures Segment:

        Products Produced—The Utility Support Structures segment (Utility) produces steel and concrete pole structures for electrical transmission, substation and distribution applications. Our products help move electrical power from where it is produced to where it is used. We manufacture tapered steel and pre-stressed concrete poles for high-voltage transmission lines, substations (which transfer high-voltage electricity to low-voltage transmission) and electrical distribution (which carry electricity from the substation to the end-user). In addition, we produce hybrid structures, which are structures with a concrete base section and steel upper sections. Utility structures can be very large, so product design engineering is important to the function and safety of the structure. Our engineering process takes into account weather and loading conditions, such as wind speeds, ice loads and the power lines attached to the structure, in order to arrive at the final design.

7

---

Table of Contents

        Markets—Our sales in this segment are mainly in the United States, where the key drivers in the utility business are capacity in the electrical transmission grid, industrial growth and deregulation in the utility industry. According to the Edison Electric Institute, the electrical transmission grid in the U.S. operates near capacity in many areas, due to increasing electrical consumption and lack of investment over the past 25 years. The expected increase in electrical consumption also should require substantial investment in new electricity generation capacity in the U.S. and around the world. Furthermore, deregulation and privatization of electrical utilities should require grid systems to interconnect. We believe that the passage of energy legislation in the U.S. in 2005 is encouraging utility companies to invest in transmission and distribution infrastructure. We expect these factors to result in increased demand for electrical utility structures to transport electricity from source to user. In markets outside of North America, growth is due to the recognized need to develop reliable systems to transport and distribute electrical power to support economic growth. The largest markets in which we participate outside of North America are China, the Middle East and Africa. Sales may take place on a bid project basis or through strategic alliance relationships with certain customers.

        Competition—Our competitive strategy in this segment is to provide high value solutions to the customer at a reasonable price. We compete on the basis of product quality, engineering expertise, high levels of customer service and reliable, timely delivery of the product. There are many competitors. Companies compete on the basis of price, quality and service. Utility sales are often made through a competitive bid process, whereby the lowest bidder is awarded the contract, provided the competitor meets all other qualifying criteria. In weak markets, price is a more important criterion in the bid process.

        Distribution Methods—Products are normally sold through commissioned sales agents or sold directly to electrical utilities.

Coatings Segment:

        Services Rendered—We add finishes to metals that inhibit corrosion, extend service lives and enhance physical attractiveness of a wide range of materials and products. Among the services provided include:

•

Hot-dipped Galvanizing



•

Anodizing



•

Powder Coating



•

E-Coating

        In our Coatings segment, we take unfinished products from our customers and return them with a galvanized, anodized or painted finish. Galvanizing is a process that protects steel with a zinc coating that is bonded to the product surface to inhibit rust and corrosion. Anodizing is a process applied to aluminum that oxidizes the surface of the aluminum in a controlled manner, which protects the aluminum from corrosion and allows the material to be dyed a variety of colors. We also paint products using powder coating and e-coating technology (where paint is applied through an electrical charge) for a number of industries and markets.

        Markets—Markets for our products are varied and our profitability is not substantially dependent on any one industry or customer. Demand for coatings services generally follows the industrial U.S. economy, as all of our operations are in the U.S. Galvanizing is used in a wide variety of industrial applications where corrosion protection of steel is desired. While markets are varied, our markets for anodized or painted products are more directly dependent on consumer markets than industrial markets.

8

---

Table of Contents

        Competition—The Coatings industry is very fragmented, with a large number of competitors. Most of these competitors are relatively small, privately held companies who compete on the basis of price and personal relationships with their customers. Our strategy is to compete on the basis of quality of the coating finish and timely delivery of the coated product to the customer. We also use the production capacity at our network of plants to assure that the customer receives quality service.

        Distribution Methods—Due to freight costs, a galvanizing location has an effective service area of an approximate 300 to 500 mile radius. While we believe that we are one of the largest custom galvanizers in North America, our sales are a small percentage of the total market. Sales and customer service are provided directly to the user by a direct sales force, generally assigned to each specific location.

Irrigation Segment:

        Products Produced—In our Irrigation segment, we manufacture and distribute mechanical irrigation equipment and related service parts under the "Valley" brand name. A Valmont irrigation machine usually is powered by electricity and propels itself over a farm field and applies water and chemicals to crops. Water and, in some instances, chemicals are applied through sprinklers attached to a pipeline that is supported by a series of towers, each of which is propelled via a drive train and tires. A standard mechanized irrigation machine (also known as a "center pivot") rotates in a circle, although we also manufacture and distribute center pivot extensions that can irrigate corners of square and rectangular farm fields as well as conform to irregular field boundaries (referred to as a "corner" machine). Our irrigation machines can also irrigate fields by moving up and down the field as opposed to rotating in a circle (referred to as a "linear" machine). Irrigation machines can be configured to irrigate fields in size from 4 acres to over 500 acres, with a standard size in the U.S. configured for a 160-acre tract of ground. One of the key components of our irrigation machine is the control system. This is the part of the machine that allows the machine to be operated in the manner preferred by the grower, offering control of such factors as on/off timing, individual field sector control, rate and depth of water and chemical application. We also offer growers options to control multiple irrigation machines through centralized computer control or mobile remote control. The irrigation machine used in international markets is substantially the same as the one produced for the North American market.

        There are other forms of irrigation available to farmers, two of the most prevalent being flood irrigation and drip irrigation. In flood irrigation, water is applied through a pipe or canal at the top of the field and allowed to run down the field by gravity. Drip irrigation involves plastic pipe or tape resting on the surface of the field or buried a few inches below ground level, with water being applied gradually. We estimate that center pivot and linear irrigation comprises one-third of the irrigated acreage in North America. International markets use predominantly flood irrigation, although all forms are used to some extent.

        Markets—Market drivers in North American and international markets are essentially the same. Since the purchase of an irrigation machine is a capital expenditure, the purchase decision is based on the expected return on investment. The benefits a grower may realize through investment in mechanical irrigation include improved yields through better irrigation, cost savings through reduced labor and lower water and energy usage. The purchase decision is also affected by current and expected net farm income, commodity prices, interest rates, the status of government support programs and water regulations in local areas. In many international markets, the relative strength or weakness of local currencies as compared with the U.S. dollar may affect net farm income, since export markets are generally denominated in U.S. dollars.

9

---

Table of Contents

        The demand for mechanized irrigation comes from the following sources:

•

Conversion from flood irrigation



•

Replacement of existing mechanized irrigation machines



•

Converting land that is not irrigated to mechanized irrigation

        One of the key drivers in our Irrigation segment worldwide is that the usable water supply is limited. We estimate that:

•

Only 2.5% of total worldwide water supply is freshwater



•

Of that 2.5%, only 30% of freshwater is available to humans



•

The largest user of that freshwater is agriculture

        We believe these factors, along with the trend of a growing worldwide population and improving diets, reflect the need to use water more efficiently while increasing food production to feed this growing population. We believe that mechanized irrigation can improve water application efficiency by 40-90% compared with traditional irrigation methods by applying water uniformly near the root zone and reducing water runoff. Furthermore, reduced water runoff improves water quality in nearby rivers, aquifers and streams, thereby providing environmental benefits in addition to conservation of water.

        Competition—In North America, there are a number of entities that provide irrigation products and services to agricultural customers. We believe we are the leader of the four main participants in the mechanized irrigation business. Participants compete for sales on the basis of price, product innovation and features, product durability and reliability, quality and service capabilities of the local dealer. Pricing can become very competitive, especially in periods when market demand is low. In international markets, our competitors are a combination of our major U.S. competitors and privately-owned local companies. Competitive factors are similar to those in North America, although pricing tends to be a more prevalent competitive strategy in international markets. Since competition in international markets is local, we believe local manufacturing capability is important to competing effectively in international markets and we have that capability in key regions.

        Distribution Methods—We market our irrigation machines and service parts through independent dealers. There are approximately 200 dealers in North America, with another approximately 130 dealers serving international markets. The dealer determines the grower's requirements, designs the configuration of the machine, installs the machine (including providing ancillary products that deliver water and electrical power to the machine) and provides after-sales service. Our dealer network is supported and trained by our technical and sales teams. Our international dealers are supported through our regional headquarters in South America, South Africa, Western Europe, Australia, China and the Middle East as well as the home office in Valley, Nebraska.

General

        Certain information generally applicable to each of our four reportable segments is set forth below.

Suppliers and Availability of Raw Materials.

        Hot rolled steel coil and plate, zinc and other carbon steel products are the primary raw materials utilized in the manufacture of finished products for all segments. We purchase these essential items from steel mills, zinc producers and steel service centers and are usually readily available. While we may experience increased lead times to acquire materials and volatility in our purchase costs, we do not believe that key raw materials would be unavailable for extended periods. We have not experienced extended or wide-spread shortages of steel during this time, due to what we believe are strong

10

---

Table of Contents

relationships with some of the major steel producers. In the past three years, we experienced volatility in zinc and natural gas prices, but we did not experience any disruptions to our operations due to availability.

Patents, Licenses, Franchises and Concessions.

        We have a number of patents for our manufacturing machinery, poles and irrigation designs. We also have a number of registered trademarks. We do not believe the loss of any individual patent would have a material adverse effect on our financial condition, results of operations or liquidity.

Seasonal Factors in Business.

        Sales can be somewhat seasonal based upon the agricultural growing season and the infrastructure construction season. Sales of mechanized irrigation equipment and tubing to farmers are traditionally higher during the spring and fall and lower in the summer. Sales of infrastructure products are traditionally higher during prime construction seasons and lower in the winter.

Customers.

        We are not dependent for a material part of any segment's business upon a single customer or upon very few customers. The loss of any one customer would not have a material adverse effect on our financial condition, results of operations or liquidity.

Backlog.

        The backlog of orders for the principal products manufactured and marketed was approximately $346.6 million at the end of the 2009 fiscal year and $611.0 million at the end of the 2008 fiscal year. We anticipate that most of the backlog of orders will be filled during fiscal year 2010. At year-end, the segments with backlog were as follows (dollar amounts in millions):

Research Activities.

        The information called for by this item is included in Note 14 of our consolidated financial statements on page 67 of this report.

Environmental Disclosure.

        We are subject to various federal, state and local laws and regulations pertaining to environmental protection and the discharge of materials into the environment. Although we continually incur expenses and make capital expenditures related to environmental protection, we do not anticipate that future expenditures should materially impact our financial condition, results of operations, or liquidity.

Number of Employees.

        At December 26, 2009, we had 6,600 employees.

11

---

Table of Contents

(d)   Financial Information About Geographic Areas

        Our international sales activities encompass over 100 foreign countries. The information called for by this item is included in Note 18 of our consolidated financial statements beginning on page 70 of this report. While China accounted for approximately 7% of our net sales in 2009, no other foreign country accounted for more than 5% of our net sales. Net sales for purposes of Note 18 include sales to outside customers.

(e)   Available Information

        We make available, free of charge through our Internet web site at http://www.valmont.com, our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as soon as reasonably practicable after such material is electronically filed with or furnished to the Securities and Exchange Commission.

ITEM 1A.    RISK FACTORS.

        The following risk factors describe various risks that may affect our business, financial condition and operations.

Increases in prices and reduced availability of key raw materials such as steel, aluminum and zinc will increase our operating costs and likely reduce our profitability.

        Hot rolled steel coil and other carbon steel products have historically constituted approximately one-third of the cost of manufacturing our products. We also use large quantities of aluminum for lighting structures and zinc for the galvanization of most of our steel products. The markets for the commodities that we use in our manufacturing processes can be volatile. The following factors increase the cost and reduce the availability of steel, aluminum and zinc for us:

•

increased demand, which occurs when other industries purchase greater quantities of these commodities at times when we require more steel, aluminum and zinc for manufacturing, which can result in higher prices and lengthen the time it takes to receive material from suppliers;



•

increased freight costs, because our manufacturing sites are usually not located near the major steel, aluminum and zinc manufacturers;



•

lower production levels of these commodities, due to reduced production capacities or shortages of materials needed to produce these commodities (such as coke and scrap steel for the production of steel) which could result in reduced supplies of these commodities, higher costs for us and increased lead times to acquire material;



•

lower inventory levels at suppliers when major steel users, such as the automobile manufacturers, increase their orders, which can reduce available inventory for us to meet our requirements;



•

increased cost of major inputs, such as scrap steel, coke, iron ore and energy;



•

fluctuations in foreign exchange rates can impact the relative cost of these commodities, which may affect the cost effectiveness of imported materials and limit our options in acquiring these commodities; and



•

international trade disputes, import duties and quotas, since we import some steel for our domestic and foreign manufacturing facilities.

        Increases in the selling prices of our products may not fully recover additional steel, aluminum and zinc costs and generally lag increases in our costs of these commodities. Consequently, an increase in steel, aluminum and zinc prices will increase our operating costs and likely reduce our profitability.

12

---

Table of Contents

        Rising steel prices in 2008 put pressure on gross profit margins, especially in our Engineered Support Structures and Utility Support Structures segments. In both of these segments, the elapsed time between the quotation of a sales order and the manufacturing of the product ordered can be several months. As some of these sales are fixed price contracts, rapid increases in steel costs likely will result in lower operating income in these businesses. We believe the rapid increase in steel prices in fiscal 2008 was due to significant increases in global steel production and consumption (especially in rapidly growing economies, such as China and India). The strong global demand for steel led to rapidly rising costs in key steel-making materials (such as coke, iron ore and scrap steel), thereby raising prices to companies that manufacture products from steel. Under such circumstances, steel supplies may become tighter and impact our ability to acquire steel and meet customer requirements on a timely basis. The speed with which steel suppliers impose price increases on us may prevent us from fully recovering these price increases and result in reduced operating margins, particularly in our lighting and traffic and utility businesses.

Increases in energy prices will increase our operating costs and likely reduce our profitability.

        We use energy to manufacture and transport our products. Our costs of transportation and heating will increase if energy costs rise, which occurred in 2007 and 2008 due to additional energy usage caused by severe winter weather conditions and higher oil, gasoline and natural gas prices. Our galvanizing operations are susceptible to fluctuations in natural gas prices because we heat our processing tanks with natural gas. During periods of higher energy costs, we may not be able to recover our increased operating costs through sales price increases without reducing demand for our products. While we hedge a portion of our exposure to higher prices via energy futures contracts, increases in energy prices will increase our operating costs and likely reduce our profitability.

Current negative economic conditions could adversely affect our results

        The current difficulties in global credit markets, softening economies and a growing apprehension among consumers may negatively impact the markets we serve in all of our operating segments. Additionally, unlike the cyclical downturns discussed below which may impact only one of our markets at a time, the current negative economic conditions may affect most or all of the markets we serve at the same time, reducing demand for our products and adversely affecting our operating results. These economic conditions may also impact the financial condition of one or more of our key suppliers, which could affect our ability to secure raw materials and components to meet our customers' demand for our products.

The ultimate consumers of our products operate in cyclical industries that have been subject to significant downturns which have adversely impacted our sales in the past and may again in the future.

        Our sales are sensitive to the market conditions present in the industries in which the ultimate consumers of our products operate, which in some cases have been highly cyclical and subject to substantial downturns. For example, a significant portion of our sales of support structures is to the electric utility industry. Our sales to the U.S. electric utility industry were over $600 million in 2009. Purchases of our products are deferrable to the extent that utilities may reduce capital expenditures for reasons such as unfavorable regulatory environments, a slow U.S. economy or financing constraints. In the event of weakness in the demand for utility structures due to reduced or delayed spending for electrical generation and transmission projects, our sales and operating income likely will decrease.

        The end users of our mechanized irrigation equipment are farmers and, as a result, sales of those products are affected by economic changes within the agriculture industry, particularly the level of farm income. In 2009, lower levels of farm income resulted in reduced demand for our mechanized irrigation and tubing products. Farm income decreases when commodity prices, acreage planted, crop yields, government subsidies and export levels decrease. In addition, weather conditions, such as extreme

13

---

Table of Contents

drought may result in reduced availability of water for irrigation, and can affect farmers' buying decisions. Farm income can also decrease as farmers' operating costs increase. In 2008, rapid increases in oil and natural gas prices resulted in higher costs of energy and nitrogen-based fertilizer (which uses natural gas as a major ingredient). Furthermore, uncertainty as to future government agricultural policies may cause indecision on the part of farmers. The status and trend of government farm supports, financing aids and policies regarding the ability to use water for agricultural irrigation can affect the demand for our irrigation equipment. In the United States, certain parts of the country are considering policies that would restrict usage of water for irrigation. All of these factors may cause farmers to delay capital expenditures for farm equipment. Consequently, downturns in the agricultural industry will likely result in a slower, and possibly a negative, rate of growth in irrigation equipment and tubing sales.

        We have also experienced cyclical demand for those of our products that we sell to the wireless communications industry. Our sales to the wireless communications industry were approximately $141 million in 2009. Sales of wireless structures to wireless carriers and build-to-suit companies that serve the wireless communications industry have historically been cyclical. These customers may elect to curtail spending on new structures to focus on cash flow and capital management. Weak market conditions have led to competitive pricing in recent years, putting pressure on our profit margins on sales to this industry. Changes in the competitive structure of the wireless industry, due to industry consolidation or reorganization, may interrupt capital plans of the wireless carriers as they assess their networks. We believe this factor resulted in reduced demand for wireless communication structures in China in 2008.

        As a result of this underlying cyclicality, we have experienced, and in the future we may experience, significant fluctuations in our sales and operating income with respect to a substantial portion of our total product offering, and such fluctuations could be material and adverse to our overall financial condition, results of operations and liquidity.

Demand for our engineered support structures and coating services is highly dependent upon the overall level of infrastructure spending.

        We manufacture and distribute engineered support structures for lighting and traffic, utility and other specialty applications. Our Coatings segments serve many construction-related industries. Because these products are used primarily in infrastructure construction, sales in these businesses are highly correlated with the level of construction activity, which historically has been cyclical. Construction activity by our private and government customers is impacted by and can decline because of, among other things:

•

weakness in the general economy, which reduces funds available for construction;



•

interest rate increases, which increase the cost of construction financing; and



•

adverse weather conditions which slow construction activity.

        The current economic recession in the United States will have some negative effect on our business. In our North American lighting product line, some of our lighting structure sales are for new residential areas. As residential and commercial construction weakens, we have experienced some negative impact on our light pole sales to these markets. In a broader sense, in event of an overall downturn in the economies in Europe or China, we may experience decreased demand if our customers have difficulty securing credit for their purchases from us.

        In addition, sales in our Engineered Support Structures segment, particularly our lighting and traffic products, are highly dependent upon federal, state, local and foreign government spending on infrastructure development projects, such as the U.S. federal highway program. The level of spending on such projects may decline for a number of reasons beyond our control, including, among other

14

---

Table of Contents

things, budgetary constraints affecting government spending generally or transportation agencies in particular, decreases in tax revenues and changes in the political climate, including legislative delays, with respect to infrastructure appropriations. A substantial reduction in the level of government appropriations for infrastructure projects could have a material adverse effect on our results of operations or liquidity.

We may lose some of our foreign investment or our foreign sales and profits may be reduced because of risks of doing business in foreign markets.

        We are an international manufacturing company with operations around the world. At December 26, 2009, we operated over 50 manufacturing plants, located on five continents, and sold our products in more than 100 countries. In 2009, approximately 25% of our total sales were either sold in markets or produced by our manufacturing plants outside of North America. We have operations in geographic markets that have recently experienced political instability, such as the Middle East, and economic uncertainty, such as Argentina. We also have a significant manufacturing presence in China. We expect that international sales will continue to account for a significant percentage of our net sales into the foreseeable future. Accordingly, our foreign business operations and our foreign sales and profits are subject to the following potential risks:

•

political and economic instability where we have foreign business operations, resulting in the reduction of the value of, or the loss of, our investment;



•

recessions in economies of countries in which we have business operations, decreasing our international sales;



•

difficulties and costs of staffing and managing our foreign operations, increasing our foreign operating costs and decreasing profits;



•

difficulties in enforcing our rights outside the United States for patents on our manufacturing machinery, poles and irrigation designs;



•

increases in tariffs, export controls, taxes and other trade barriers reducing our international sales and our profit on these sales; and



•

acts of war or terrorism.

        As a result, we may lose some of our foreign investment or our foreign sales and profits may be materially reduced because of risks of doing business in foreign markets.

We are subject to currency fluctuations from our international sales, which can negatively impact our reported earnings.

        We sell our products in many countries around the world. Approximately 25% of our fiscal 2009 sales were generated by export demand or foreign markets and are often made in foreign currencies, mainly the Brazilian real, Canadian dollar, Chinese renminbi, euro and South African rand. Because our financial statements are denominated in U.S. dollars, fluctuations in currency exchange rates between the U.S. dollar and other currencies have had and will continue to have an impact on our reported earnings. If the U.S. dollar weakens or strengthens versus the foreign currencies mentioned above, the result will be an increase or decrease in our reported sales and earnings, respectively. Currency fluctuations have affected our financial performance in the past and may affect our financial performance in any given period.

        We also face risks arising from the imposition of foreign exchange controls and currency devaluations. Exchange controls may limit our ability to convert foreign currencies into U.S. dollars or to remit dividends and other payments by our foreign subsidiaries or businesses located in or conducted within a country imposing controls. Currency devaluations result in a diminished value of funds

15

---

Table of Contents

denominated in the currency of the country instituting the devaluation. Actions of this nature could have a material adverse effect on our results of operations and financial condition in any given period.

We face strong competition in our markets.

        We face competitive pressures from a variety of companies in each of the markets we serve. Our competitors include companies who provide the technologies that we provide as well as companies who provide competing technologies, such as drip irrigation. Our competitors include international, national, and local manufacturers, some of whom may have greater financial, manufacturing, marketing and technical resources than we do, or greater penetration in or familiarity with a particular geographic market than we have. In addition, certain of our competitors, particularly with respect to our utility and wireless communication product lines, have sought bankruptcy protection in recent years, and may emerge with reduced debt service obligations, which could allow them to operate at pricing levels that put pressures on our margins. Some of our customers have moved manufacturing operations or product sourcing overseas, which can negatively impact our sales of galvanizing and anodizing services. To remain competitive, we will need to invest continuously in manufacturing, product development and customer service, and we may need to reduce our prices, particularly with respect to customers in industries that are experiencing downturns. We cannot provide assurance that we will be able to maintain our competitive position in each of the markets that we serve.

We could incur substantial costs as the result of violations of, or liabilities under, environmental laws.

        Our facilities and operations are subject to U.S. and foreign laws and regulations relating to the protection of the environment, including those governing the discharge of pollutants into the air and water, the management and disposal of hazardous substances and wastes, and the cleanup of contamination. Failure to comply with these laws and regulations, or with the permits required for our operations, could result in fines or civil or criminal sanctions, third party claims for property damage or personal injury, and investigation and cleanup costs. Potentially significant expenditures could be required in order to comply with environmental laws that may be adopted or imposed in the future.

        Certain of our facilities have been in operation for many years and, over time, we and other predecessor operators of these facilities have generated, used, handled and disposed of hazardous and other regulated wastes. Contaminants have been detected at some of our present and former sites, principally in connection with historical operations. In addition, from time to time we have been named as a potentially responsible party under Superfund or similar state laws. While we are not aware of any contaminated sites, including third-party sites, at which we may have material obligations, the discovery of additional contaminants or the imposition of additional cleanup obligations at these sites could result in significant liability.

We may not realize the improved operating results that we anticipate from acquisitions we may make in the future, and we may experience difficulties in integrating the acquired businesses or may inherit significant liabilities related to such businesses.

        We explore opportunities to acquire businesses that we believe are related to our core competencies from time to time, some of which may be material to us. We expect such acquisitions will produce operating results better than those historically experienced or presently expected to be experienced in the future by us in the absence of the acquisition. We cannot provide assurance that this assumption will prove correct with respect to any acquisition.

        Any future acquisitions may present significant challenges for our management due to the increased time and resources required to properly integrate management, employees, information systems, accounting controls, personnel and administrative functions of the acquired business with those of Valmont and to manage the combined company on a going forward basis. We may not be able to

16

---

Table of Contents

successfully integrate and streamline overlapping functions or, if such activities are successfully accomplished, such integration may be more costly to accomplish than presently contemplated. We may also have difficulty in successfully integrating the product offerings of Valmont and acquired businesses to improve our collective product offering. Our efforts to integrate acquired businesses could be affected by a number of factors beyond our control, including general economic conditions. In addition, the process of integrating acquired businesses could cause the interruption of, or loss of momentum in, the activities of our existing business. The diversion of management's attention and any delays or difficulties encountered in connection with the integration of these businesses could adversely impact our business, results of operations and liquidity, and the benefits we anticipate may never materialize.

        In addition, although we conduct reviews of businesses we acquire, we may be subject to unexpected claims or liabilities, including environmental cleanup costs, as a result of these acquisitions. Such claims or liabilities could be costly to defend or resolve and be material in amount, and thus could materially and adversely affect our business and results of operations and liquidity.

We have, from time to time, maintained a substantial amount of outstanding indebtedness, which could impair our ability to operate our business and react to changes in our business, remain in compliance with debt covenants and make payments on our debt.

        As of December 26, 2009, we had approximately $172.4 million of total indebtedness outstanding and our ratio of total interest-bearing debt to shareholders' equity was 21.3%. We had $255.1 million of additional borrowing capacity under our revolving credit facility at December 26, 2009. While we significantly decreased our indebtedness in 2009, we normally borrow money to make business acquisitions and major capital expenditures. From time to time, such as in 2008, our borrowings have been significant. Our level of indebtedness could have important consequences, including:

•

our ability to satisfy our obligations under our debt agreements could be affected and any failure to comply with the requirements, including significant financial and other restrictive covenants, of any of our debt agreements could result in an event of default under the agreements governing our indebtedness;



•

a substantial portion of our cash flow from operations will be required to make interest and principal payments and will not be available for operations, working capital, capital expenditures, expansion, or general corporate and other purposes, including possible future acquisitions that we believe would be beneficial to our business;



•

our ability to obtain additional financing in the future may be impaired;



•

we may be more highly leveraged than our competitors, which may place us at a competitive disadvantage;



•

our flexibility in planning for, or reacting to, changes in our business and industry may be limited; and



•

our degree of leverage may make us more vulnerable in the event of a downturn in our business, our industry or the economy in general.

        Any of these factors could have a material adverse effect on our business, financial condition, results of operations, cash flows and business prospects.

        The restrictions and covenants in our debt agreements could limit our ability to obtain future financings, make needed capital expenditures, withstand a future downturn in our business, or the economy in general, or otherwise conduct necessary corporate activities. These covenants may prevent us from taking advantage of business opportunities that arise.

17

---

Table of Contents

        A breach of any of these covenants would result in a default under the applicable debt agreement. A default, if not waived, could result in acceleration of the debt outstanding under the agreement and in a default with respect to, and acceleration of, the debt outstanding under our other debt agreements. The accelerated debt would become immediately due and payable. If that should occur, we may not be able to pay all such debt or to borrow sufficient funds to refinance it. Even if new financing were then available, it may not be on terms that are favorable to us.

ITEM 1B.    UNRESOLVED STAFF COMMENTS.

        None.

ITEM 2.    PROPERTIES.

        The Company's corporate headquarters are located in a leased facility in Omaha, Nebraska, under a lease expiring in 2016. The headquarters of the Company's reporting segments are located in Valley, Nebraska except for the headquarters of the Company's Utility Support Structures segment, which are located in Birmingham, Alabama. The principal operating locations of the Company are listed below.

18

---

Table of Contents

19

---

Table of Contents

ITEM 3.    LEGAL PROCEEDINGS.

        We are not a party to, nor are any of our properties subject to, any material legal proceedings. We are, from time to time, engaged in routine litigation incidental to our businesses.

ITEM 4.    SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS.

        No matters were submitted to a vote of stockholders during the fourth quarter of 2009.

Executive Officers of the Company

        Our executive officers at December 26, 2009, their ages, positions held, and the business experience of each during the past five years are, as follows:

Mogens C. Bay, age 61, Chairman and Chief Executive Officer since January 1997.

Terry J. McClain, age 62, Senior Vice President and Chief Financial Officer since January 1997.

E. Robert Meaney, age 62, Senior Vice President since September 1998.

Steven G. Branscombe, age 54, Vice President—Information Technology since October 2001.

John G. Graboski, age 54, Vice President—Human Resources since August 2007. Director of Human Resources at Praxair Distribution, Inc. from March 1997 to August 2007.

Mark C. Jaksich, age 52, Vice President and Controller since February 2000.

Walter P. Pasko, age 59, Vice President—Procurement since May 2002.

Brian Desigio, age 40, Vice President—Corporate Development since April 2008. Senior Vice President at Fairmount Food Group from January 2006 to April 2008. Director of Corporate Development at General Mills from January 2004 to December 2005.

20

---

Table of Contents

PART II

ITEM 5.    MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS, AND ISSUER PURCHASES OF EQUITY SECURITIES.

        Our common stock, previously listed and trading on the NASDAQ National Market under the symbol "VALM", was approved for listing on the New York Stock Exchange and began trading under the symbol "VMI" on August 30, 2002. We had approximately 5,400 shareholders of common stock at December 26, 2009. Other stock information required by this item is included in "Quarterly Financial Data (unaudited)" on page 83 of this report.

Issuer Purchases of Equity Securities

        During the fourth quarter, the shares reflected above were those delivered to the Company by employees as part of stock option exercises, either to cover the purchase price of the option or the related taxes payable by the employee as part of the option exercise. The price paid per share was the market price at the date of exercise.

21

---

Table of Contents

ITEM 6.    SELECTED FINANCIAL DATA.

SELECTED FIVE-YEAR FINANCIAL DATA

22

---

Table of Contents

23

---

Table of Contents

24

---

Table of Contents

---

NM = Not meaningful