arcw_Current_Folio_10Q

Table of Contents

 

 

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10 - Q

 

QUARTERLY REPORT PURSUANT SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the quarterly period ended October 2, 2016

 

OR

 

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from _______ to _______

 

Picture 1

 

ARC Group Worldwide, Inc.

(Exact name of registrant as specified in its charter)

 

Utah

(State or other jurisdiction of incorporation or organization)

 

 

 

 

001-33400

    

87-0454148

(Commission File Number)

 

(IRS Employer Identification Number)

 

810 Flightline Blvd.

Deland, FL 32724

(Address of principal executive offices including zip code)

 

(303) 467-5236

(Registrant’s telephone number, including area code)

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes ☒ No ☐

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Date File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit and post such files).  Yes ☒ No ☐

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company.  See the definitions of “large accelerated filer”, “accelerated filer” and “small reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

 

 

 

Large accelerated filer ☐

 

Accelerated filer ☐

 

 

 

Non-accelerated filer ☐

 

Smaller reporting company ☒

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes ☐  No ☒

 

As of November 7, 2016, the Registrant had 18,795,509 shares outstanding of its $.0005 par value common stock.

 

 

 

 


 

ARC Group Worldwide, Inc.

 

Table of Contents

 

 

 

 

 

PART I. FINANCIAL INFORMATION 

 

 

 

 

    

 

Item 1. 

Financial Statements

 

 

 

 

 

 

Unaudited Condensed Consolidated Statements of Operations for the Three Months Ended October 2, 2016 and September 27, 2015

 

 

 

 

 

 

Unaudited Condensed Consolidated Balance Sheets as of October 2, 2016 and June 30, 2016

 

 

 

 

 

Unaudited Condensed Consolidated Statements of Cash Flows for the Three Months Ended October 2, 2016 and September 27, 2015

 

 

 

 

 

 

Notes to Unaudited Condensed Consolidated Financial Statements

 

 

 

 

 

Item 2. 

Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

19 

 

 

 

 

Item 3. 

Quantitative and Qualitative Disclosures About Market Risk

 

27 

 

 

 

 

Item 4. 

Controls and Procedures

 

28 

 

 

 

 

PART II. OTHER INFORMATION 

 

 

 

 

 

 

Item 1A. 

Risk Factors

 

29 

 

 

 

 

Item 6. 

Exhibits

 

29 

 

 

 

 

SIGNATURES 

 

30 

 

 


 

Table of Contents

PART I — FINANCIAL INFORMATION

 

ITEM 1.  FINANCIAL STATEMENTS

 

ARC Group Worldwide, Inc.

Unaudited Condensed Consolidated Statements of Operations

(in thousands, except for share and per share amounts)

 

 

 

 

 

 

 

 

 

 

 

For the three months ended

 

 

    

October 2, 2016

    

September 27, 2015

 

Sales

 

$

26,826

 

$

23,631

 

Cost of sales

 

 

21,825

 

 

19,528

 

Gross profit

 

 

5,001

 

 

4,103

 

Selling, general and administrative

 

 

5,049

 

 

4,006

 

(Loss) income from operations

 

 

(48)

 

 

97

 

Other (expense) income, net

 

 

(33)

 

 

3

 

Interest expense, net

 

 

(1,107)

 

 

(1,140)

 

Loss on extinguishment of debt

 

 

(723)

 

 

 —

 

Loss before income taxes

 

 

(1,911)

 

 

(1,040)

 

Income tax benefit

 

 

1,331

 

 

426

 

Net loss from continuing operations

 

 

(580)

 

 

(614)

 

Gain on sale of subsidiary and net income from discontinued operations, net of tax

 

 

4,187

 

 

173

 

Net income (loss)

 

 

3,607

 

 

(441)

 

Net income attributable to non-controlling interests:

 

 

 

 

 

 

 

Continuing operations

 

 

(22)

 

 

(22)

 

Discontinued operations

 

 

(4)

 

 

(7)

 

Net income attributable to non-controlling interests

 

 

(26)

 

 

(29)

 

Net income (loss) attributable to ARC Group Worldwide, Inc.

 

$

3,581

 

$

(470)

 

 

 

 

 

 

 

 

 

Net (loss) income per common share, basic and diluted:

 

 

 

 

 

 

 

Continuing operations

 

$

(0.03)

 

$

(0.04)

 

Discontinued operations

 

$

0.23

 

$

0.01

 

Attributable to ARC Group Worldwide, Inc.

 

$

0.20

 

$

(0.03)

 

 

 

 

 

 

 

 

 

Weighted average common shares outstanding:

 

 

 

 

 

 

 

Basic and diluted

 

 

18,123,883

 

 

18,123,883

 

 

See accompanying notes to the unaudited condensed consolidated financial statements.

3


 

Table of Contents

ARC Group Worldwide, Inc.

Unaudited Condensed Consolidated Balance Sheets

(in thousands, except share data)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

    

October 2, 2016

    

June 30, 2016

 

ASSETS

 

 

 

 

 

 

 

Current assets:

 

 

 

 

 

 

 

Cash

 

$

3,861

 

$

3,620

 

Accounts receivable, net

 

 

15,304

 

 

14,186

 

Inventories, net

 

 

18,761

 

 

16,585

 

Deferred income tax assets

 

 

 —

 

 

478

 

Prepaid expenses and other current assets

 

 

3,117

 

 

3,886

 

Current assets of discontinued operations

 

 

 —

 

 

1,818

 

Total current assets

 

 

41,043

 

 

40,573

 

Property and equipment, net

 

 

41,561

 

 

41,828

 

Goodwill

 

 

11,427

 

 

11,427

 

Intangible assets, net

 

 

22,222

 

 

23,066

 

Other

 

 

23

 

 

28

 

Long-term assets of discontinued operations

 

 

 —

 

 

3,527

 

Total assets

 

$

116,276

 

$

120,449

 

 

 

 

 

 

 

 

 

LIABILITIES AND STOCKHOLDERS' EQUITY

 

 

 

 

 

 

 

Current liabilities:

 

 

 

 

 

 

 

Accounts payable

 

$

10,351

 

$

8,602

 

Accrued expenses and other current liabilities

 

 

4,562

 

 

2,591

 

Deferred revenue

 

 

1,420

 

 

1,457

 

Bank borrowings, current portion of long-term debt, net of unamortized deferred financing costs

 

 

1,693

 

 

15,648

 

Capital lease obligations, current portion

 

 

841

 

 

837

 

Accrued escrow obligations, current portion

 

 

3,083

 

 

2,842

 

Current liabilities of discontinued operations

 

 

 —

 

 

723

 

Total current liabilities

 

 

21,950

 

 

32,700

 

Long-term debt, net of current portion and unamortized deferred financing costs

 

 

41,682

 

 

36,769

 

Deferred income tax liabilities

 

 

40

 

 

1,407

 

Capital lease obligations, net of current portion

 

 

1,715

 

 

1,930

 

Accrued escrow obligations, net of current portion

 

 

725

 

 

966

 

Other long-term liabilities

 

 

2,114

 

 

2,115

 

Long-term liabilities of discontinued operations

 

 

 —

 

 

19

 

Total liabilities

 

 

68,226

 

 

75,906

 

 

 

 

 

 

 

 

 

Commitments and contingencies (Note 12)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Equity:

 

 

 

 

 

 

 

Preferred stock, $0.001 par value, 2,000,000 shares authorized, no shares issued and outstanding

 

 

 —

 

 

 —

 

Common stock, $0.0005 par value, 250,000,000 shares authorized; 18,803,910 shares issued and 18,795,509 shares issued and outstanding at October 2, 2016 and June 30, 2016

 

 

10

 

 

10

 

Treasury stock, at cost; 8,401 shares at October 2, 2016 and June 30, 2016

 

 

(94)

 

 

(94)

 

Additional paid-in capital

 

 

30,013

 

 

29,702

 

Retained earnings

 

 

17,352

 

 

13,771

 

Accumulated other comprehensive loss

 

 

(24)

 

 

(6)

 

Total ARC Group Worldwide, Inc. stockholders' equity

 

 

47,257

 

 

43,383

 

Non-controlling interests

 

 

793

 

 

1,160

 

Total equity

 

 

48,050

 

 

44,543

 

Total liabilities and equity

 

$

116,276

 

$

120,449

 

 

See accompanying notes to the unaudited condensed consolidated financial statements.

 

4


 

Table of Contents

ARC Group Worldwide, Inc.

Unaudited Condensed Consolidated Statements of Cash Flows

(in thousands)

 

 

 

 

 

 

 

 

 

 

 

For the three months ended

 

 

    

October 2, 2016

    

September 27, 2015

 

Cash flows from operating activities:

 

 

 

 

 

 

 

Net income (loss)

 

$

3,607

 

$

(441)

 

Adjustments to reconcile net income (loss) to net cash provided by operating activities:

 

 

 

 

 

 

 

Depreciation and amortization

 

 

2,374

 

 

2,362

 

Share-based compensation expense

 

 

312

 

 

 —

 

Gain on sale of discontinued operations

 

 

(5,722)

 

 

 —

 

Bad debt expense and other

 

 

13

 

 

5

 

Deferred income taxes

 

 

(888)

 

 

150

 

Changes in working capital:

 

 

 

 

 

 

 

Accounts receivable

 

 

(1,379)

 

 

974

 

Inventory

 

 

(2,414)

 

 

(596)

 

Prepaid expenses and other assets

 

 

870

 

 

(815)

 

Accounts payable

 

 

1,990

 

 

962

 

Accrued expenses

 

 

1,701

 

 

(950)

 

Deferred revenue

 

 

(37)

 

 

(145)

 

Net cash provided by operating activities

 

 

427

 

 

1,506

 

 

 

 

 

 

 

 

 

Cash flows from investing activities:

 

 

 

 

 

 

 

Purchases of property and equipment

 

 

(1,329)

 

 

(629)

 

Proceeds from sale of subsidiary

 

 

10,500

 

 

 —

 

Net cash provided by (used in) investing activities

 

 

9,171

 

 

(629)

 

 

 

 

 

 

 

 

 

Cash flows from financing activities:

 

 

 

 

 

 

 

Proceeds from debt issuance

 

 

32,112

 

 

 —

 

Repayments of long-term debt and capital lease obligations

 

 

(41,487)

 

 

(1,589)

 

Net cash used in financing activities

 

 

(9,375)

 

 

(1,589)

 

Effect of exchange rates on cash

 

 

18

 

 

37

 

Net increase (decrease) in cash

 

 

241

 

 

(675)

 

Cash, beginning of period

 

 

3,620

 

 

4,821

 

Cash, end of period

 

$

3,861

 

$

4,146

 

 

 

 

 

 

 

 

 

Supplemental disclosures of cash flow information:

 

 

 

 

 

 

 

Cash paid for interest

 

$

1,007

 

$

1,050

 

Cash paid for income taxes, net of refunds

 

$

(927)

 

$

123

 

 

See accompanying notes to the unaudited condensed consolidated financial statements.

5


 

Table of Contents

ARC Group Worldwide, Inc.

Notes to Unaudited Condensed Consolidated Financial Statements

 

NOTE 1 – Nature of Operations and Basis of Presentation

 

Nature of Operations

 

ARC Group Worldwide, Inc. (the “Company” or “ARC”) is a leading, global advanced manufacturer offering a full suite of products and services to its customers, including: (i) metal injection molding (“MIM”); (ii) 3D metal and plastic printing (also referred to as “Additive Manufacturing”); (iii) precision metal stamping; (iv) traditional and clean room plastic injection molding; and (v) advanced rapid and conformal tooling.  Through the Company’s diverse product offering, ARC provides its customers with a holistic prototyping and full-run production solution for both precision metal and plastic fabrication.  The Company further differentiates itself from its competitors by providing innovative, custom capabilities, which improve high-precision manufacturing efficiency and speed-to-market for its customers.

 

ARC’s mission is to accelerate the adoption of key technologies, such as automation, robotics, production software, and 3D printing, in traditional manufacturing, thereby benefiting from the elimination of inefficiencies currently present in the global supply chain.  Further, ARC seeks to create innovative ways to streamline and improve the overall manufacturing process, including offering instant online quoting, in-house rapid and advanced conformal tooling, and a full suite of prototype-to-production capabilities.

 

Basis of Presentation

 

The Company’s fiscal year begins July 1 and ends June 30, and the quarters for interim reporting consist of thirteen weeks; therefore, the quarter end will not always coincide with the date of the calendar month-end.

 

The accompanying unaudited condensed consolidated financial statements of the Company have been prepared in accordance with U.S. generally accepted accounting principles (“GAAP”) for interim financial statements and pursuant to the rules and regulations of the U.S. Securities and Exchange Commission (“SEC”).  In the opinion of management, the accompanying unaudited condensed consolidated financial statements reflect all adjustments consisting of normal recurring adjustments necessary for a fair presentation of its financial position and results of operations.  Interim results of operations are not necessarily indicative of the results that may be achieved for the full year.  The consolidated balance sheet as of June 30, 2016, was derived from the audited financial statements as of that date, but does not include all disclosures including notes required by GAAP.  As such, this quarterly report should be read in conjunction with the consolidated financial statements and related notes included in the Company’s Annual Report on Form 10-K for the fiscal year ended June 30, 2016.  The Company follows the same accounting policies for preparing quarterly and annual reports.  

 

Principles of Consolidation

 

The Consolidated Financial Statements include the amounts of ARC and its controlled subsidiaries.  All material intercompany transactions have been eliminated in consolidation. 

 

NOTE 2 – Significant Accounting Policies

 

Use of Estimates

 

The preparation of financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements, and reported amounts of revenue and expenses during the reporting period.  Due to the inherent uncertainties in making estimates, actual results could differ from those estimates and such differences may be material to the consolidated financial statements.

 

6


 

Table of Contents

Non-Controlling Interests

 

In connection with the acquisitions of FloMet LLC and Tekna Seal LLC, the Company obtained a majority interest in the subsidiaries and control of the subsidiaries' boards of directors.   During the first quarter of fiscal 2016, the Company purchased approximately 1.9% of the outstanding non-controlling membership interests of Tekna Seal LLC.  On September 30, 2016, the Company sold Tekna Seal LLC, which included 95.7% owned by the Company and 4.3% held by minority stakeholders (see Note 3, Discontinued Operations, for more information).  On October 2, 2016 and September 27, 2015, third party investors owned approximately 3.8% of the outstanding membership interests of FloMet LLC.  The Company has recognized the carrying value of the non-controlling interests as a component of stockholders’ equity for the applicable periods presented.

 

Comprehensive Income

 

For each of the quarters ended October 2, 2016 and September 27, 2015, there were no material differences between net income (loss) and comprehensive income (loss).

 

Accounting Pronouncements Adopted in the Current Period

 

In November 2015, the Financial Accounting Standards Board (“FASB”) issued Accounting Standard Update (“ASU”) 2015-17, Balance Sheet Classification of Deferred Taxes.  This update requires an entity to classify deferred tax assets and liabilities as non-current within a classified statement of financial position.  ASU 2015-17 is effective for annual reporting periods, and interim periods therein, beginning after December 15, 2016, but early adoption is permitted.  This update may be applied either prospectively to all deferred tax liabilities and assets or retrospectively to all periods presented.  The Company adopted the provisions of ASU 2015-17 on a prospective basis as of July 1, 2016; therefore, the prior period was not retrospectively adjusted.  The adoption of ASU 2015-17 did not have an impact on our consolidated results of operations or cash flows.

 

In April 2015, the FASB issued ASU 2015-03, Simplifying the Presentation of Debt Issuance Costs to ASC Topic 835, Interest - Imputation of Interest (“ASU 2015-03”).  ASU 2015-03 requires an entity to present debt issuance costs in the balance sheet as a direct deduction from the related debt liability rather than as an asset.  Amortization of debt issuance costs will continue to be reported as interest expense.  ASU 2015-03 is effective for interim and annual reporting periods in fiscal years that begin after December 15, 2015.

 

The Company adopted the provisions of ASU 2015-03 on July 1, 2016, which required retroactive application and represented a change in accounting principle.  The deferred financing costs of approximately $1.3 million associated with a portion of our outstanding debt, which were previously included in prepaid expenses and other current assets and other assets on the consolidated balance sheet as of June 30, 2016, are reflected as a reduction to the carrying liability of the Company’s outstanding debt.  As a result of this change in accounting principle, the consolidated balance sheet as of June 30, 2016 was adjusted as follows (in thousands):

 

 

 

 

 

 

 

 

 

 

 

 

June 30, 2016

 

 

Previously

 

Effect of Adoption of

 

 

 

    

Reported

    

Accounting Principle

    

As Adjusted

Assets:

 

 

 

 

 

 

 

 

 

Prepaid expenses and other current assets

 

$

4,378

 

$

(429)

 

$

3,949

Other assets

 

$

948

 

$

(920)

 

$

28

Total assets

 

$

121,798

 

$

(1,349)

 

$

120,449

 

 

 

 

 

 

 

 

 

 

Liabilities:

 

 

 

 

 

 

 

 

 

Bank borrowings, current portion of long-term debt

 

$

15,909

 

$

(261)

 

$

15,648

Long-term debt, net of current portion

 

$

37,857

 

$

(1,088)

 

$

36,769

Total liabilities

 

$

77,255

 

$

(1,349)

 

$

75,906

 

Recent Accounting Pronouncements

 

In August 2016, FASB issued ASU 2016-15, Statement of Cash Flows (Topic 230): Classification of Certain Cash Receipts and Cash Payments (“ASU 2016-15”).  ASU 2016-15 clarifies and provides specific guidance on eight cash flow classification issues that are not currently addressed by GAAP and thereby reduce the diversity in practice.  ASU

7


 

Table of Contents

2016-15 is effective for public business entities for annual periods, including interim periods within those annual periods, beginning after December 15, 2017, with early application permitted.  This guidance is applicable to the Company's fiscal year beginning July 1, 2018.  The Company does not anticipate that this guidance will have a material impact on its consolidated financial statements.

 

In February 2016, the FASB issued ASU No. 2016-02, Leases: Topic 842 (“ASU 2016-02”), to supersede nearly all existing lease guidance under GAAP.  ASU 2016-02 requires the recognition of lease assets and lease liabilities on the balance sheet by lessees for those leases currently classified as operating leases.  ASU 2016-02 also requires qualitative disclosures along with specific quantitative disclosures and is effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years.  Early application is permitted.  Entities are required to apply the amendments at the beginning of the earliest period presented using a modified retrospective approach.  The Company is evaluating the requirements of this guidance and has not yet determined the impact of the adoption on its consolidated financial position, results of operations and cash flows.

 

In May 2014, the FASB issued ASU No. 2014-09, Revenue from Contracts with Customers: Topic 606 (“ASU 2014-09”), to supersede nearly all existing revenue recognition guidance under GAAP.  The core principle of ASU 2014-09 is to recognize revenues when promised goods or services are transferred to customers in an amount that reflects the consideration that is expected to be received for those goods or services.  ASU 2014-09 defines a five step process to achieve this core principle and, in doing so, it is possible more judgment and estimates may be required within the revenue recognition process than required under existing GAAP including identifying performance obligations in the contract, estimating the amount of variable consideration to include in the transaction price and allocating the transaction price to each separate performance obligation.  In August 2015, the FASB issued ASU 2015-14 which defers the effective date for one year beyond the originally specified effective date.  ASU 2014-09 is effective in the Company’s first quarter of fiscal 2019 and may transition to the standard using either the full retrospective approach or retrospectively with a cumulative effect of initially applying the amendments recognized at the date of initial application.  The Company is currently evaluating the impact of its pending adoption of ASU 2014-09 on its consolidated financial statements.

 

NOTE 3 – Discontinued Operations

 

On September 30, 2016, the Company sold its non-core subsidiary, Tekna Seal LLC (“Tekna Seal”), to Winchester Electronics Corporation (“Winchester”) pursuant to a Membership Interests Purchase Agreement for $10.5 million in cash.  The sale to Winchester covered all of the membership interests of Tekna Seal, including 95.7% owned by the Company and 4.3% held by the Tekna Seal minority stakeholders.  The proceeds of the sale, after giving effect to any working capital adjustments, will be allocated among the Company and the minority sellers proportionate to their respective ownership of pre-closing membership interests.  The Company used the net cash proceeds of the sale to repay principal outstanding under the Company’s revolving loan. 

 

Below is a summary of the gain on sale of discontinued operations (in thousands):

 

 

 

 

 

Gross proceeds

 

$

10,500

 

 

 

 

Less:

 

 

 

Property and equipment, net

 

 

218

Accounts receivable

 

 

930

Inventory

 

 

1,265

Other current assets

 

 

51

Accounts payable and accrued expenses

 

 

(962)

Total net assets disposed

 

 

1,502

 

 

 

 

Goodwill

 

 

3,374

Transaction costs

 

 

374

Minority interests

 

 

(393)

Gain on sale of discontinued operations, before income taxes

 

$

5,643

 

8


 

Table of Contents

In connection with the sale, the Company recorded a pre-tax gain of approximately $5.6 million, which includes a non-cash charge of $3.4 million related to goodwill associated with Tekna Seal, and transaction costs of approximately $0.4 million.  The income from operations of Tekna Seal attributable to the Company was approximately $0.1 million and $0.2 million for the three months ended October 2, 2016 and September 27, 2015, respectively. 

 

The condensed consolidated statements of operations for the three months ended October 2, 2016 include the results of operations of Tekna Seal through the sale date of September 30, 2016 and the gain on the sale of Tekna Seal.  Financial information for discontinued operations for the three months ended October 2, 2016 and September 27, 2015 is as follows (in thousands):

 

 

 

 

 

 

 

 

 

 

For the three months ended

 

 

October 2, 2016

 

September 27, 2015

Sales

 

$

1,277

 

$

858

Cost of sales

 

 

(943)

 

 

(478)

Gross profit

 

 

334

 

 

380

Selling, general and administrative

 

 

(242)

 

 

(207)

Income from discontinued operations, before income taxes

 

 

92

 

 

173

Gain on sale of discontinued operations

 

 

5,643

 

 

 —

Total income from discontinued operations, before income taxes

 

 

5,735

 

 

173

Income tax expense on discontinued operations

 

 

(1,548)

 

 

 —

Income from discontinued operations, net of tax

 

$

4,187

 

$

173

 

The following table presents the carrying amount as of June 30, 2016, of the major classes of assets and liabilities held for sale in the condensed consolidated balance sheet (in thousands):

 

 

 

 

 

 

 

June 30, 2016

Current assets:

 

 

 

Accounts receivable

 

$

727

Inventory

 

 

1,028

Other assets

 

 

63

Total current assets

 

 

1,818

Property and equipment, net

 

 

153

Goodwill

 

 

3,374

Total assets of discontinued operations

 

$

5,345

 

 

 

 

Current liabilities:

 

 

 

Accounts payable and accrued expenses

 

$

714

Capital lease obligations

 

 

9

Total current liabilities

 

 

723

Capital lease obligations

 

 

19

Total liabilities of discontinued operations

 

$

742

 

Cash flows from Tekna Seal for the three months ended October 2, 2016 and September 27, 2015 are combined with the cash flows from operations within each of the categories presented on the condensed consolidated statements of cash flows.  There were no significant operating or investing activities from discontinued operations during the three months ended October 2, 2016 and September 27, 2015. 

 

9


 

Table of Contents

NOTE 4– Inventory

 

Inventories consisted of the following (in thousands):

 

 

 

 

 

 

 

 

 

 

October 2,

 

June 30,

 

 

    

2016

    

2016

 

Raw materials and supplies

 

$

6,592

 

$

6,299

 

Work-in-process

 

 

8,465

 

 

7,505

 

Finished goods

 

 

4,610

 

 

4,664

 

 

 

 

19,667

 

 

18,468

 

Reserve for obsolescence

 

 

(906)

 

 

(855)

 

Inventory of discontinued operations

 

 

 —

 

 

(1,028)

 

 

 

$

18,761

 

$

16,585

 

 

 

 

 

 

NOTE 5 – Property and Equipment

 

Property and equipment consisted of the following (in thousands):

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Depreciable Life

 

October 2,

 

June 30,

 

 

    

(in years)

    

2016

    

2016

 

Land

 

 

 

 

$

1,264

 

$

1,264

 

Building and improvements

 

7

-

40

 

 

17,411

 

 

17,460

 

Machinery and equipment

 

3

-

12

 

 

39,283

 

 

39,350

 

Office furniture and equipment

 

3

-

10

 

 

1,085

 

 

1,050

 

Construction-in-process

 

 

 

 

 

1,886

 

 

1,838

 

Assets acquired under capital lease

 

 

 

 

 

 

5,446

 

 

5,482

 

 

 

 

 

 

 

 

66,375

 

 

66,444

 

Accumulated depreciation

 

 

 

 

 

 

(23,224)

 

 

(23,018)

 

Accumulated amortization on capital leases

 

 

 

 

 

 

(1,590)

 

 

(1,445)

 

Property and equipment of discontinued operations

 

 

 

 

 

 

 —

 

 

(153)

 

 

 

 

 

 

 

$

41,561

 

$

41,828

 

 

Depreciation expense totaled $1.5 million for the three months ended October 2, 2016 and September 27, 2015.

 

 

 

 

 

 

NOTE 6 – Goodwill and Intangible Assets

 

Goodwill

 

The following table summarizes the activity in the Company's goodwill account by segment during the three months ended October 2, 2016 (in thousands):

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

    

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Precision Components Group

 

3DMT Group

 

Flanges and Fittings Group

 

Consolidated

 

Balance, June 30, 2016

 

$

10,285

 

$

2,804

 

$

1,712

 

$

14,801

 

Sale of subsidiary (1)

 

 

(3,374)

 

 

 —

 

 

 —

 

 

(3,374)

 

Balance, October 2, 2016

 

$

6,911

 

$

2,804

 

$

1,712

 

$

11,427

 


(1)

During the three months ended October 2, 2016, the Company sold its majority interest in Tekna Seal LLC and recorded a reduction of goodwill of $3.4 million, which is included in income from discontinued operations, net of tax on the condensed consolidated statement of operations (see Note 3, Discontinued Operations, for more information).

 

10


 

Table of Contents

Intangible Assets

 

The following table summarizes the Company's intangible assets (in thousands):

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

October 2, 2016

 

June 30, 2016

 

 

 

Gross

 

 

 

 

 

 

 

Gross

 

 

 

 

 

 

 

 

 

Carrying

 

Accumulated

 

Net Carrying

 

Carrying

 

Accumulated

 

Net Carrying

 

Intangible assets:

    

Amount

    

Amortization

    

Amount

     

Amount

    

Amortization

    

Amount

 

Patents and tradenames

 

$

3,773

 

$

(826)

 

$

2,947

 

$

3,773

 

$

(766)

 

$

3,007

 

Customer relationships

 

 

24,077

 

 

(6,623)

 

 

17,454

 

 

24,077

 

 

(6,021)

 

 

18,056

 

Non-compete agreements

 

 

3,642

 

 

(1,821)

 

 

1,821

 

 

3,642

 

 

(1,639)

 

 

2,003

 

Total

 

$

31,492

 

$

(9,270)

 

$

22,222

 

$

31,492

 

$

(8,426)

 

$

23,066

 

 

Intangible assets are being amortized using the straight-line method over estimated useful lives ranging from five to fifteen years.  Amortization expense totaled $0.8 million for identifiable intangible assets for the three months ended October 2, 2016 and September 27, 2015.  Estimated future amortization expense for the next five years as of October 2, 2016, is as follows (in thousands):

 

 

 

 

 

 

Fiscal Years

    

Amount

 

Remainder of 2017

 

$

2,531

 

2018

 

 

3,375

 

2019

 

 

3,191

 

2020

 

 

2,643

 

2021

 

 

2,643

 

Thereafter

 

 

7,839

 

Total

 

$

22,222

 

 

There were no impairments of long-lived assets during the three months ended October 2, 2016 and September 27, 2015.

 

NOTE 7 – Accrued Escrow Obligations

 

On April 7, 2014, the Company acquired the membership interests of Advance Tooling Concepts, LLC (“ATC”) for approximately $24.3 million, of which: (i) $21.9 million was paid in cash and (ii) $2.4 million, consisting of 233,788 newly issued shares of common stock of the Company, was to be held in escrow for a period of 12 months (“ATC Escrow”) to satisfy certain working capital adjustments and/or indemnification obligations.  In July 2014, the ATC Escrow was reduced by $0.7 million following the completion of a working capital adjustment.  In October 2015, the Company entered into an agreement to settle and terminate the ATC Escrow in cash.  The cash settlement has been accrued in current and long-term liabilities.  The ATC Escrow shares were returned to the Company and retired in February 2016.

 

On June 25, 2014, the Company acquired substantially all of the assets of Kecy Corporation and 411 Munson Holding, LLC for approximately $26.8 million, of which:  (i) $24.2 million was paid in cash; and (ii) $2.6 million, consisting of 172,450 newly issued shares of common stock of the Company, was to be held in escrow for a period of 18 months (“Kecy Escrow”) to satisfy certain working capital adjustments and/or indemnification obligations.  The Company has determined the common stock issued is mandatorily redeemable and has therefore recorded $2.6 million as a current liability in the accompanying balance sheets.  In August 2015, and in connection with the decline in the Company’s stock price since the date of acquisition, the Company issued 499,176 additional shares for security of the escrow.  The Company is in the process of finalizing the settlement of the Kecy Escrow.

11


 

Table of Contents

 

NOTE 8 – Debt

 

Long-term debt payable consists of the following (in thousands):

 

 

 

 

 

 

 

 

 

 

Balance as of

 

 

    

October 2, 2016

    

June 30, 2016

 

Senior secured revolving loan

 

$

3,113

 

$

7,560

 

Senior secured mortgage-based term loans

 

 

21,527

 

 

4,449

 

Senior secured term loan

 

 

 —

 

 

16,248

 

Senior secured delayed draw term loan

 

 

 —

 

 

5,509

 

Subordinated term loan

 

 

20,000

 

 

20,000

 

Total debt

 

 

44,640

 

 

53,766

 

Unamortized deferred financing costs

 

 

(1,265)

 

 

(1,349)

 

Total debt, net

 

 

43,375

 

 

52,417

 

Current portion of long-term debt, net of unamortized deferred financing costs

 

 

(1,693)

 

 

(15,648)

 

Long-term debt, net of current portion and unamortized deferred financing costs

 

$

41,682

 

$

36,769

 

 

New Senior Credit Agreement

 

On September 29, 2016, the Company and certain of its subsidiaries, entered into a new senior asset-based lending credit agreement with Citizens Bank, N.A. (the “Senior ABL Credit Facility”).

 

The Senior ABL Credit Facility provides the Company with the following extensions of credit and loans: (1) a Revolving Commitment in the principal amount of $25.0 million (the “Revolving Loan”) and (2) a mortgage-based Term Loan Commitment in the principal amount of $17.5 million (the “Term Loan”).  The loans under the Senior ABL Credit Facility are secured by liens on substantially all domestic assets of the Company and guaranteed by the Company’s domestic subsidiaries who are not borrowers under the Senior ABL Credit Facility.

 

The aggregate amount of revolving loans permitted under the Senior ABL Credit Facility may not exceed a borrowing base consisting of: (i) the sum of 85% of certain eligible accounts receivable, plus (ii) the lesser of 65% of the value of certain eligible inventory and 85% of the net orderly liquidation value of certain eligible inventory, plus (iii) an amount not to exceed $4.2 million, which amount will be adjusted based on the face amount of certain letters of credit issued to Citizens Bank, N.A. in connection with certain operating leases and capitalized leases, minus (iv) reserves for any amounts which the lender deems necessary or appropriate.

 

Borrowings under the Senior ABL Credit Facility may be made as Base Rate Loans or Eurodollar Rate Loans.  The Base Rate loans will bear interest at the fluctuating rate per annum equal to (i) the highest of (a) the Federal Funds Rate plus 1/2 of 1.00%, (b) Citizens own prime rate; and (c) the adjusted Eurodollar rate on such day for an interest period of one (1) month plus 1.00%; and (ii) plus the Applicable Rate, as described below.  Eurodollar Rate Loans will bear interest at the rate per annum equal to (i) the ICE Benchmark Administration LIBOR Rate; plus (ii) the Applicable Rate.  The “Applicable Rate” will be (a) 2.50% with respect to Base Rate Loans that are Term Loans and 3.50% with respect to Eurodollar Rate Loans that are Term Loans, and (b) 2.50% with respect to Base Rate Loans that are Revolving Loans and 3.50% with respect to Eurodollar Rate Loans that are Revolving Loans, in each case until December 31, 2016, and thereafter the Applicable Rate will be adjusted quarterly, responsive to the Company’s Quarterly Average Availability Percentage, ranging from 1.25% to 1.75% with respect to Base Rate Loans that are Revolving Loans and from 2.25% to 2.75% with respect to Eurodollar Rate Loans that are Revolving Loans.  In addition to interest payments on the Senior ABL Credit Facility loans, the Company will pay commitment fees to the lender of 0.375% per quarter on undrawn Revolving Loans.  The Company will also pay other customary fees and reimbursements of costs and disbursements to the lender.

 

The Maturity Date with respect to the Revolving Loan and the Term Loan is August 11, 2019, provided, however, upon repayment of Company subordinated indebtedness the maturity date will automatically extend to five years after the Closing Date for Revolving Loans and Revolving Commitments, and with respect to the Term Loans, the earlier of the date that is (i) ten years after the Closing Date and (ii) the maturity date of the Revolving Loans.  The Senior ABL Credit Facility contains certain mandatory prepayment provisions, including mandatory prepayments due in respect of sales of assets, sales of equity securities, events of default and other customary events, with exceptions for non-core business dispositions.

12


 

Table of Contents

 

The Senior ABL Credit Facility contains customary covenants and negative covenants regarding operation of the Company’s business, including maintenance of certain financial ratios, as well as restrictions on dispositions of Company assets.

 

In connection with the Senior ABL Credit Facility, the Company and the Borrowers together with certain subsidiaries (collectively, the “Guarantors”), have entered into an Amended and Restated Guarantee and Collateral Agreement with Citizens Bank, N.A. dated as of September 29, 2016, which secures all of the loans and credits drawn from the Senior ABL Credit Facility by the Borrowers.  The security interests established under the Amended and Restated Guarantee and Collateral Agreement include senior secured liens on substantially all of the assets of the Guarantors.  The Guarantors have agreed to guarantee the unconditional payment and performance to the lender of all obligations of the Borrowers under the Senior ABL Credit Facility.

 

As of October 2, 2016, the Company was in compliance with its debt covenants under the Senior ABL Credit Facility. 

 

Prior Amended & Restated Credit Agreement

 

On September 29, 2016, the Company refinanced all of the existing long-term debt obligations with Citizens Bank, N.A. into the Senior ABL Credit Facility described above.  The Company accounted for the refinancing as an extinguishment of debt and wrote off $0.7 million of previously deferred financing fees. 

 

Subordinated Term Loan Credit Agreement

 

On November 10, 2014, the Company and certain of its subsidiaries entered into a $20.0 million, five-year Subordinated Term Loan Credit Agreement (“Subordinated Loan Agreement”) with McLarty Capital Partners SBIC, L.P. (“McLarty”), which bears interest at 11% annually.  Upon an event of default under the Subordinated Loan Agreement, the interest rate increases automatically by 2.00% annually.  The proceeds were used to repay certain outstanding loans under the Company’s previous credit facility.  McLarty is indirectly a related party to one of the officers and directors of the Company; therefore, the Board of Directors appointed a special committee consisting solely of independent directors to assure that the Subordinated Loan Agreement is fair and reasonable to the Company and its shareholders. 

 

On April 20, 2016, the Company entered into a second amendment to the Subordinated Loan Agreement (“McLarty Second Amendment”), as previously amended on December 29, 2014, to modify certain terms including: 

 

(1)

Allows for the exclusion from the fixed charge coverage ratio $1.3 million of certain federal and state taxes paid related to prior years, effective March 27, 2016;

(2)

Modifies the minimum fixed charge coverage ratio and maximum total leverage ratio in line with the Company’s current financial expectations, effective March 27, 2016; and

(3)

Establishes mandatory prepayments that will be required upon the completion of asset sales or sale-leaseback transactions, with the amount of the prepayments to be determined based upon achievement of certain leverage ratios.

 

The Subordinated Loan Agreement has been subordinated to the Senior ABL Credit Facility pursuant to a First Lien Subordination Agreement.  The Subordinated Loan Agreement contains customary representations and warranties, events of default, affirmative covenants, negative covenants, and prepayment terms that are similar to those contained in the Senior ABL Credit Facility described above.   

 

As of October 2, 2016, the Company was in compliance with its debt covenants under the Subordinated Credit Facility.

 

Loan Contract

 

On March 23, 2016, AFT-Hungary Kft. (“AFT Hungary”), a wholly owned subsidiary of the Company, entered into a Loan Contract with Erste Bank Hungary Zrt. in an amount equal to €4.0 million (“Loan Contract”).  The initial funding of €4.0 million drawn on the Loan Contract occurred on March 31, 2016.  Approximately $3.0 million of the net proceeds from the Loan Contract were used to partially repay obligations outstanding under the Amended & Restated Credit Agreement, with the remaining net proceeds to be used for capital expenditures and other investments to facilitate the export of goods and services provided by AFT Hungary.

 

13


 

Table of Contents

The loan matures on March 7, 2021, and bears interest at a fixed rate of 0.98% per annum.  The Company is required to make semi-annual principal payments in an amount equal to approximately €400,000 along with monthly interest payments.  The Loan Contract is secured by certain of AFT Hungary’s assets, including the real estate and selected machinery and equipment located in Retsag, Hungary.

 

Future Debt Payments

 

The following schedule represents the Company’s future debt payments as of October 2, 2016 (in thousands):

 

 

 

 

 

 

2017 (1)

    

$

1,104

 

2018

 

 

1,770

 

2019

 

 

1,770

 

2020

 

 

21,770

 

2021

 

 

18,226

 

Total

 

$

44,640

 


(1)

Represents long-term debt principal payments for the nine month period ending June 30, 2017.

 

 

NOTE 9 – Income Taxes

 

The balance of income taxes receivable was $0 and $1.6 million at October 2, 2016 and June 30, 2016, respectively.  The decrease in the income taxes receivable during the three months ended October 2, 2016, was primarily associated with the receipt of a federal income tax refund of approximately $0.9 million related to the carryback of the Company’s 2015 net operating loss.  The remaining income taxes receivable has been netted to reflect a current period taxes payable of $0.5 million due primarily to the gain on the sale of Tekna Seal.  The Company had unrecognized tax benefits for uncertain tax positions of $1.1 million and $1.0 million on October 2, 2016 and June 30, 2016, respectively, which are included in other long-term liabilities. 

 

NOTE 10 – Earnings Per Share

 

Basic earnings per share is computed by dividing net income available to common stockholders by the weighted-average number of shares of common stock outstanding during each period.  Diluted earnings per share is computed by dividing net income available to common stockholders by the diluted weighted-average shares of common stock outstanding during each period.  In connection with the acquisitions of ATC and Kecy, the Company issued a total of 905,414 shares of common stock, which were placed in escrow to satisfy certain working capital adjustments and/or indemnification obligations. As these escrow shares are expected to be returned to the Company, the escrow shares have been excluded from the basic and diluted earnings per share computations.  In February 2016, the 233,788 shares of common stock previously issued for the ATC acquisition were returned to the Company and retired. 

 

As a result of the Company’s net loss from continuing operations for the three months ended October 2, 2016, potentially dilutive stock options of approximately 134,927 were considered anti-dilutive and were excluded from the computation of diluted earnings per share.  For the three months ended September 27, 2015, the Company had no outstanding equity awards or other potentially dilutive securities; therefore, there was no computation of dilutive securities. 

 

14


 

Table of Contents

NOTE 11 – Share-Based Compensation

 

In November 2015, the Company’s stockholders approved the ARC Group Worldwide, Inc. 2015 Equity Incentive Plan (“2015 Plan”), which is administered by the Compensation Committee (“Committee”) of the Board of Directors.  The 2015 Plan reserves for issuance a total of 950,000 shares of common stock, which may be in the form of incentive stock options, non-qualified stock options, restricted stock, restricted stock units, or other types of awards as authorized under the plan.  As of October 2, 2016, there were 7,125 shares of common stock available to be granted under the 2015 Plan.  In the case of stock options, the exercise price of the stock options granted may not be less than the fair market value of a share of common stock at the date of grant.  The Committee determines the vesting conditions of awards; however, the performance period for an award subject to the satisfaction of performance measures may not exceed five years.  The 2015 Plan will terminate ten years after its adoption, unless terminated earlier by the Company’s Board of Directors.

 

A summary of stock option activity under the 2015 Plan as of October 2, 2016 is as follows:

 

 

 

 

 

 

 

 

 

 

 

    

 

    

Weighted

    

Weighted Average

 

 

 

 

 

Average Exercise

 

Remaining Contractual

 

 

 

Shares

 

Price

 

Term (in years)

 

Outstanding as of June 30, 2016

 

759,050

 

$

1.51

 

 

 

Granted

 

190,950

 

$

2.50

 

 

 

Forfeited

 

(7,125)

 

$

1.51

 

 

 

Outstanding as of October 2, 2016

 

942,875

 

$

1.71

 

6.41

 

Vested and exercisable as of October 2, 2016

 

292,513

 

$

2.11

 

6.66

 

Vested and expected to vest as of October 2, 2016

 

840,437

 

$

1.73

 

6.42

 

 

Stock options granted during the three month period ending October 2, 2016 have contractual lives of seven years.  The weighted-average grant date fair value of stock options granted during the three months ended October 2, 2016 was $1.46 per share. The total fair value of shares vested during the three months ended October 2, 2016 was $0.5 million.

 

Determining Fair Value

 

The Company estimates the fair value of stock options granted using the Black-Scholes method.  The assumptions used to determine the value of the Company’s stock options granted to employees during the three month period ended October 2, 2016 were as follows:

 

 

 

 

 

 

 

 

 

Expected term

    

3.50

 

-

4.75

years

 

Expected volatility

 

78.8

%

-

85.0

%

 

Expected dividend yield

 

-

%

 

 

 

 

Risk-free interest rate

 

1.02

%

-

1.19

%

 

 

Expected Term – The expected term represents the period of time the options are expected to be outstanding.  The Company uses the simplified method, as permitted by the SEC, to calculate the expected term, as the Company does not have sufficient historical exercise data to provide a reasonable basis upon which to estimate the expected life in years. The simplified method is calculated as the average of the time-to-vesting and the contractual life of the options.

 

Expected Volatility – Expected volatility is based on the historical volatility of the Company’s common stock, which we believe will be indicative of future experience. 

 

Expected Dividends – The Company has never paid dividends on its common stock and currently does not intend to do so in the near term, and accordingly, the dividend yield percentage is zero.

 

Risk-Free Interest Rate - The risk-free interest rate is based on the U.S. Treasury yield in effect at the time of grant with a term equal to the expected term of the stock option granted.

 

Share-Based Compensation Expense

 

Compensation expense recognized during the three month period ended October 2, 2016 was $0.3 million, and is included in selling, general and administrative expense.  As of October 2, 2016, there was $0.4 million of total

15


 

Table of Contents

unrecognized compensation expense related to non-vested stock options, which is expected to be recognized over a weighted-average period of 3.3 years.  The Company estimated expected forfeitures and is recognizing compensation expense only for those option grants expected to vest.  The Company’s estimate of forfeitures may be adjusted throughout the requisite service period based on the extent to which actual forfeitures differ, or are likely to differ, from the Company’s previous estimates.  At the end of the service period compensation cost will have been recognized only for those awards for which the employee has provided the requisite service.

 

Employee Stock Purchase Plan

 

Under the terms of the Company’s employee stock purchase plan ("ESPP"), eligible employees may authorize payroll deductions up to 5% of their base pay to purchase shares of the Company’s common stock at a price equal to 85% of the lower of the closing price at the beginning or end of each six-month purchase period.  A total of 750,000 shares were authorized under the ESPP.  The purchase period began on August 1, 2016; therefore, no shares have been purchased under the Company’s ESPP as of October 2, 2016.

 

NOTE 12 – Commitments and Contingencies

 

The Company leases land, facilities, and equipment under various non-cancellable operating lease agreements expiring through August 31, 2024, which contain various renewal options.  The Company also leases equipment under non-cancellable capital lease agreements expiring through June 30, 2024.  The capital leases have interest rates ranging from 3.0% to 5.8%.

 

From time to time, the Company is a party to various litigation matters incidental to the conduct of its business.  As of October 2, 2016, the Company is not presently a party to any legal proceedings, the resolution of which, management believes, would have a material adverse effect on its business, operating results, financial condition, or cash flows.

 

NOTE 13 – Segment Information

 

The Company’s operations are classified into four reportable business segments:  Precision Components Group, 3DMT Group, Flanges and Fittings Group, and Wireless Group.

 

·

The Precision Components Group companies provide highly engineered fabricated metal components using processes consisting of metal injection molding and precision metal stamping.  Industries served include aerospace, automotive, consumer durables, electronic devices, firearms and defense, and medical and dental devices.

 

·

The 3DMT Group consists of our tooling product line, 3DMT (our 3D printing and additive manufacturing operations), and ATC.

 

·

The Flanges and Fittings Group consists of General Flange & Forge LLC (“GF&F”).  GF&F provides custom machining solutions and special flange facings.

 

·

The Wireless Group focuses on wireless broadband technology related to propagation and optimization.  It designs and develops hardware, including antennas, radios, and related accessories, used in broadband, industrial, and other wireless networks.  Products are sold to public and private carriers, wireless infrastructure providers, wireless equipment distributors, value added resellers, and other original equipment manufacturers.

 

16


 

Table of Contents

The historical results of Tekna Seal, which were included in the Precision Components Group segment, have been reflected as discontinued operations; therefore, historical segment information has been restated.  Summarized segment information for the three month periods ended October 2, 2016 and September 27, 2015 is as follows (in thousands):

 

 

 

 

 

 

 

 

 

 

 

Three months ended

 

 

    

October 2,

    

September 27,

 

 

 

2016

 

2015

 

Sales:

 

 

 

 

 

 

 

Precision Components Group

 

$

19,332

 

$

17,069

 

3DMT Group

 

 

6,141

 

 

5,056

 

Flanges and Fittings Group

 

 

1,113

 

 

1,172

 

Wireless Group

 

 

240

 

 

334

 

Consolidated sales

 

$

26,826

 

$

23,631

 

 

 

 

 

 

 

 

 

Operating costs:

 

 

 

 

 

 

 

Precision Components Group

 

$

17,435

 

$

16,261

 

3DMT Group

 

 

6,823

 

 

5,209

 

Flanges and Fittings Group

 

 

983

 

 

968

 

Wireless Group

 

 

245

 

 

288

 

Consolidated operating costs

 

$

25,486

 

$

22,726

 

 

 

 

 

 

 

 

 

Segment operating income (loss):

 

 

 

 

 

 

 

Precision Components Group

 

$

1,897

 

$

808

 

3DMT Group

 

 

(682)

 

 

(153)

 

Flanges and Fittings Group

 

 

130

 

 

204

 

Wireless Group

 

 

(5)

 

 

46

 

Corporate (1)

 

 

(1,388)

 

 

(808)

 

Total segment operating (loss) income

 

$

(48)

 

$

97

 

 

 

 

 

 

 

 

 

Interest expense, net

 

 

(1,107)

 

 

(1,140)

 

Loss on extinguishment of debt

 

 

(723)

 

 

 —

 

Other (expense) income, net

 

 

(33)

 

 

3

 

Non-operating expense

 

 

(1,863)

 

 

(1,137)

 

Consolidated loss before income taxes and non-controlling interest

 

$

(1,911)

 

$

(1,040)

 


(1)Corporate expense includes compensation and benefits, insurance, legal, accounting, consulting, and board of director’s fees.

 

 

NOTE 14 – Significant Customers

 

The concentration of the Company’s business with a relatively small number of customers may expose it to a material adverse effect if one or more of these large customers were to experience financial difficulty or were to cease being a customer for non-financial related issues.  The Company’s revenue concentrations of 5% or greater are as follows:

 

 

 

 

 

 

 

 

October 2,

 

September 27,

 

 

Customer

2016

    

2015

 

 

1 (b)

12.8

%  

7.4

%

 

2 (a)

10.8

%  

9.1

%

 

3 (a)

8.2

%  

8.0

%

 

4 (a)

7.6

%  

9.6

%

 

Total

39.4

%  

34.1

%

 


(a)

Revenue from this customer is generated through our Precision Components Group segment.

(b)

Revenue from this customer is generated through our 3DMT Group segment.

 

17


 

Table of Contents

The Company’s accounts receivable concentrations of 5% or greater for the above-listed customers are as follows:

 

 

 

 

 

 

 

 

 

 

 

Percentage of Receivables

 

 

 

 

 

October 2,

 

June 30,

 

 

 

Customer

    

2016

    

2016

 

    

 

1

 

12.8

%  

8.3

%

 

 

2

 

10.7

%  

10.5

%

 

 

3

 

6.9

%  

8.3

%

 

 

4

 

5.2

%  

5.2

%

 

 

Total

 

35.6

%  

32.3

%

 

 

18


 

Table of Contents

ITEM 2.  MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

This discussion should be read in conjunction with the condensed consolidated financial statements and notes included elsewhere in this report and the consolidated financial statements and notes in the ARC Group Worldwide, Inc. (“ARC,” “our,” “we,” or “us”) Annual Report on Form 10-K for the fiscal year ended June 30, 2016, as filed with the Securities and Exchange Commission (“SEC”).

 

Cautionary Statement Concerning Forward-Looking Statements

 

The information contained in this Quarterly Report (this “Report”) may contain certain statements about ARC that are or may be “forward-looking statements,” that is, statements related to future, not past, events, including forward-looking statements within the meaning of the U.S. Private Securities Litigation Reform Act of 1995.  These statements are based on the current expectations of the management of ARC and are subject to uncertainty and changes in circumstances and involve risks and uncertainties that could cause actual results to differ materially from those expressed or implied in such forward-looking statements.  Factors that could cause our results to differ materially from current expectations include, but are not limited to, factors detailed in our reports filed with the SEC, including further but not limited to those discussed in the “Risk Factors” section of our Annual Report on Form 10-K for the fiscal year ended June 30, 2016.  In addition, these statements are based on a number of assumptions that are subject to change.  The forward-looking statements contained in this Report may include all other statements in this document other than historical facts.  Without limitation, any statements preceded or followed by, or that include the words “targets,” “plans,” “believes,” “expects,” “aims,” “intends,” “will,” “may,” “anticipates,” “estimates,” “approximates,” “projects,” “seeks,” “sees,” “should,” “would,” “expect,” “positioned,” “strategy,” or words or terms of similar substance or derivative variation or the negative thereof, are forward-looking statements.  Forward-looking statements include statements relating to the following: (1) future capital expenditures, expenses, revenues, earnings, synergies, economic performance, indebtedness, financial condition, losses, and future prospects; (2) business and management strategies and the expansion and growth of ARC; (3) the effects of government regulation on ARC’s business; and (4) our plans, objectives, expectations and intentions generally.

 

There are a number of factors that could cause actual results and developments to differ materially from those expressed or implied by such forward-looking statements.  Additional particular uncertainties that could cause our actual results to be materially different than those expressed in forward-looking statements include: risks associated with our international operations; significant movements in foreign currency exchange rates; changes in the general economy, as well as the cyclical nature of our markets; availability and cost of raw materials, parts and components used in our products; the competitive environment in the areas of our planned industrial activities; our ability to identify, finance, acquire and successfully integrate attractive acquisition targets; expected earnings of ARC; the amount of and our ability to estimate known and unknown liabilities; material disruption at any of our significant manufacturing facilities; the solvency of our insurers and the likelihood of their payment for losses; our ability to manage and grow our business and execution of our business and growth strategies; our ability and the ability our customers to access required capital at a reasonable costs; our ability to expand our business in our targeted markets; the level of capital investment and expenditures by our customers in our strategic markets; our financial performance; our ability to identify, address and remediate any material weakness in our internal control over financial reporting; our ability to achieve or maintain credit ratings and the impact on our funding costs and competitive position if we do not do so; and other risks.  Other unknown or unpredictable factors could also cause actual results to differ materially from those in any forward-looking statement.

 

Due to such uncertainties and risks, readers are cautioned not to place undue reliance on any forward-looking statements, which speak only as of the date hereof.  ARC undertakes no obligation to publicly update or revise forward-looking statements, whether as a result of new information, future events or otherwise, except to the extent legally required.  Nothing contained herein shall be deemed to be a forecast, projection or estimate of the future financial performance of ARC unless otherwise expressly stated.

 

19


 

Table of Contents

Overview

 

ARC Group Worldwide, Inc. is a leading, global advanced manufacturer offering a full suite of products and services to our customers, including: (i) metal injection molding (“MIM”); (ii) 3D metal and plastic printing (also referred to as “Additive Manufacturing”); (iii) precision metal stamping; (iv) traditional and clean room plastic injection molding; and (v) advanced rapid and conformal tooling.  Through our diverse product offering, we provide our customers with a holistic prototyping and full-run production solution for both precision metal and plastic fabrication.  We further differentiate ourselves from our competitors by providing innovative, custom capabilities, which improve high-precision manufacturing efficiency and speed-to-market for our customers.

 

Our mission is to accelerate the adoption of key technologies, such as automation, robotics, production software, and 3D printing, in traditional manufacturing, thereby benefiting from the elimination of inefficiencies currently present in the global supply chain.  Further, we seek to create innovative ways to streamline and improve the overall manufacturing process, including offering instant online quoting, in-house rapid and advanced conformal tooling, and a full suite of prototype-to-production capabilities.

 

More specifically, the two key pillars of our business strategy are centered on the following areas:

 

·

Holistic Manufacturing Solution.  The metal and plastic fabrication industries are highly fragmented sectors with numerous single-solution providers.  Given the inefficiencies associated with working with these disjointed groups, many manufacturers seek to improve their supplier base by working with more scaled, holistic providers.  Our strategy is to facilitate the consolidation and streamlining of global supply chains by offering a holistic solution to our customers’ manufacturing needs.  In particular, ARC provides a “one-stop shop” solution to our customers by offering a spectrum of highly advanced products, processes, and services, thereby delivering highly-engineered precision components at efficient production yields.

·

Accelerating Speed-to-Market.  The traditional prototype-to-production process is often subject to lengthy bottlenecks and is characterized by inefficient price quoting delays, time-consuming tooling procedures, and outdated production methodologies.  To differentiate itself from competitors, ARC focuses on reducing inefficiencies in the development cycle by offering the seamless integration of a wide-variety of proprietary technologies in order to dramatically reduce the time and cost associated with new product development.  Specifically, the Company has developed rapid and instant online quoting solutions, rapid prototype solutions, short-run production services, in-house rapid and advanced conformal tooling, and rapid full production capabilities.

Separately, we believe that U.S. manufacturing is poised for a rejuvenation as global wage disparities mitigate and traditional labor-intensive processes are displaced by technology.  We believe these macroeconomic trends may aid in the adoption of our business strategy.

 

Our key fundamental strengths are built upon core capabilities, including:

 

·

Metal Injection Molding.  We are a large and well-respected MIM provider.  As a pioneer of MIM technology, and driven by our material science understanding, powder metallurgy experience, and established global facilities, we are one of the most advanced MIM operators in the marketplace.  ARC provides high-quality, complex, precise net-shape metal components to market-leading companies in numerous sectors, including the medical and dental, firearm and defense, automotive, aerospace, consumer durable, and electronic device industries.  Further, our process is highly automated, utilizing advanced robotics and automation to ensure high levels of quality and efficiency.

20


 

Table of Contents

·

3D Printing.  We offer a variety of 3D printing solutions, with an emphasis on: (i) metal 3D printing; and (ii) rapid and advanced conformal tooling.  In general, given promising signs of growth and related barriers to entry, we believe the metal 3D printing sector to be one of the more attractive segments of the overall Additive Manufacturing industry.  Furthermore, metal 3D printing, while a complex technology still in its early stages, shares several fundamental similarities with our MIM business, thereby helping to accelerate our research and development.  Separately, our metal 3D printing capabilities enable ARC to offer a variety of new services, including rapid prototyping, rapid tooling and short-run production, helping our customers improve their product speed-to-market.  Given our established customer base, diverse metallurgy background, and scalable injection molding capabilities, we believe we are well-positioned in the industrial metal 3D printing market.

·

Additional Metal and Plastic Fabrication Capabilities.  We offer a number of additional specialty metal and plastic fabrication capabilities that enable us to provide our customers with a full suite of custom-component products.  Our specialty capabilities include precision stamping, magnesium injection molding, computer numerical control machining, plastic injection molding (including medical clean room applications), and fitting and flange manufacturing.

·

Wireless.  Our wireless business designs and develops hardware, including antennas, radios, and related accessories, used in broadband and other wireless networks.  Products are sold to public and private carriers, wireless infrastructure providers, wireless equipment distributors, value-added resellers, and other original equipment manufacturers (“OEM”).  Further, we believe there is an opportunity to increase utilization of our wireless technology to wirelessly connect the manufacturing floor and industrial products/applications, as the world moves to a more wireless based framework.

Our overall growth strategy is centered on:

 

·

driving organic improvement through the expansion and cross-selling of our core services to existing clients;

·

accelerating the adoption of our technology by new customers in traditional manufacturing markets;

·

expanding our holistic service offerings through strategic vertical and horizontal acquisitions; and

·

improving financial and operational results from the implementation of operational best practices. 

 

Accordingly, all of our business divisions are managed consistently with this strategy in order to drive organic sales growth and operational efficiencies, while improving quality, speed, and service to our customers.

 

Results of Operations – Three Months Ended October 2, 2016 and September 27, 2015

 

The following tables summarize our sales and gross profit from continuing operations for the periods indicated, by reporting segment (in thousands):

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Three Months Ended

 

 

 

October 2, 2016

 

September 27, 2015

 

 

 

Amount

 

Percent of total

    

Amount

 

Percent of total

 

Sales:

    

 

 

    

 

 

 

 

 

 

 

Precision Components Group

 

$

19,332

 

72.1%

 

$

17,069

 

72.2%

 

3DMT Group

 

 

6,141

 

22.9%

 

 

5,056

 

21.4%

 

Flanges and Fittings Group

 

 

1,113

 

4.1%

 

 

1,172

 

5.0%

 

Wireless Group

 

 

240

 

0.9%

 

 

334

 

1.4%

 

Total

 

$

26,826

 

100.0%

 

$

23,631

 

100.0%

 

 

 

 

 

 

 

 

 

 

 

 

 

Gross profit:

 

 

 

 

 

 

 

 

 

 

 

Precision Components Group

 

$

3,940

 

78.9%

 

$

2,704

 

65.9%

 

3DMT Group

 

 

667

 

13.3%

 

 

902

 

22.0%

 

Flanges and Fittings Group

 

 

322

 

6.4%

 

 

392

 

9.5%

 

Wireless Group

 

 

72

 

1.4%

 

 

106

 

2.6%

 

Total

 

$

5,001

 

100.0%

 

$

4,104

 

100.0%

 

21


 

Table of Contents

 

Sales

 

For the Three Months Ended October 2, 2016 Compared to the Three Months Ended September 27, 2015

 

Sales from continuing operations during the three month period ended October 2, 2016, totaled $26.8 million, representing an increase of $3.2 million, or 13.6%, from $23.6 million during the three month period ended September 27, 2015.  The change in sales by reportable segment was as follows:

 

·

Precision Components Group sales were $19.3 million during the three month period ended October 2, 2016, representing an increase of approximately $2.2 million, or 12.9%, as compared with sales of $17.1 million in the prior year period.  The increase in sales was primarily due to higher MIM sales of $2.1 million.  MIM sales increased primarily as a result of higher sales to customers in the firearm and defense, and automotive industries. 

 

·

3DMT Group sales were $6.1 million during the three month period ended October 2, 2016, representing an increase of approximately $1.0 million, or 19.6%, as compared with sales of $5.1 million in the prior year period.  The increase in sales was primarily due to higher plastic injection molding sales of $1.8 million, partially offset by lower tooling sales of $0.7 million as more of the tool production is for internal ownership and use.

 

·

Flanges and Fittings Group sales were $1.1 million during the three month period ended October 2, 2016, representing a decrease of approximately $0.1 million, or 8.3%, as compared with sales of $1.2 million in the prior year period.  The decrease was primarily due to lower sales to customers in the oil and gas industry and increased competition.

 

·

Wireless Group sales were $0.2 million during the three month period ended October 2, 2016 representing a decrease of approximately $0.1 million as compared with sales of $0.3 million in the prior year period.  The decrease in sales is primarily due to increased competition in the frequency space and applications in which our products are used.

 

Gross Profit

 

Gross profit is affected by a number of factors including product mix, cost of labor and raw materials, unit volumes, pricing, competition, new products and services, new customer programs, and capacity utilization.  In the case of new customer programs, profitability normally lags revenue growth due to product start-up costs, lower manufacturing volumes in the start-up phase, operational inefficiencies, and under-absorbed overhead.  Gross margin often improves as manufacturing volumes increase, which improves our utilization rates and overhead absorption.  As a result of these various factors, our gross margin varies from period to period.

 

For the Three Months Ended October 2, 2016 Compared to the Three Months Ended September 27, 2015

 

On a consolidated basis gross profit from continuing operations was $5.0 million during the three month period ended October 2, 2016, representing an increase of approximately $0.9 million, or 22.0%, as compared with gross profit of $4.1 million in the prior year period.  Gross margin increased to 18.6% in the three month period ended October 2, 2016, compared with 17.4% in the three month period ended September 27, 2015.  Gross profit by reportable segment was as follows:

 

·

Precision Components Group gross profit was $3.9 million during the three month period ended October 2, 2016, representing an increase of approximately $1.2 million, or 44.4%, as compared with gross profit of $2.7 million in the prior year period.  Gross margin increased to 20.4% in the three month period ended October 2, 2016, compared with 15.8% in the three month period ended September 27, 2015.  The primary reason for the increase in gross profit was due to higher production volume at our MIM facilities in Colorado.  The primary reason for the increase in gross margin percentage was due to increased production and improved efficiency at our MIM facilities in Colorado.

 

22


 

Table of Contents

·

3DMT Group gross profit was $0.7 million during the three month period ended October 2, 2016, representing a decrease of $0.2 million, or 22.2%, as compared with gross profit of $0.9 million in the prior year period.  Gross margin decreased to 10.9% in the three month period ended October 2, 2016, compared with 17.8% in the three month period ended September 27, 2015.  The primary reason for the decrease in gross profit was lower tooling sales as we are building more tools for internal ownership and use.  Gross margin percentage decreased on tooling sales due to higher labor and contracting costs as we are building more complex products.

 

·

Flanges and Fittings Group gross profit was $0.3 million during the three month periods ended October 2, 2016 representing a decrease of $0.1 million, or 25.0%, as compared with gross profit of $0.4 million in the prior year period.  The decrease in gross profit was due to certain non-recurring refunds of duties received in the prior year.

 

·

Wireless Group gross profit was $0.1 million during the three month periods ended October 2, 2016 and September 27, 2015. 

 

The following paragraphs discuss other items affecting the results of our operations for the three months ended October 2, 2016 and September 27, 2015.

 

Selling, General and Administrative Expenses

 

Selling, general and administrative expense (“SG&A”) from continuing operations totaled $5.0 million, or 18.8% of sales, during the three month period ended October 2, 2016, compared with $4.0 million, or 17.0% of sales, during the three month period ended September 27, 2015.  The increase in SG&A expense during the three month period ended October 2, 2016 was primarily due to higher labor related costs of $0.7 million, of which $0.3 million was related to stock based compensation, and higher outside service fees of $0.3 million. 

 

Interest Expense, Net

 

Interest expense, net was $1.1 million during the three month periods ended October 2, 2016 and September 27, 2015.  In connection with the refinancing of the Company’s senior secured credit facility and the retirement of debt resulting from proceeds from the sale of Tekna Seal, both in September 2016, the Company expects interest expense will decrease during the subsequent quarters in fiscal year 2017.

 

Loss on Extinguishment of Debt

 

During the three months ended October 2, 2016, approximately $0.7 million of unamortized deferred financing costs were expensed as a result of the extinguishment of our First Amended and Restated Credit Agreement.

 

Discontinued Operations

 

In September 2016, the Company sold its subsidiary Tekna Seal LLC pursuant to the terms and conditions of a Membership Interests Purchase Agreement.  The sale covered all of the membership interests of Tekna Seal, including 95.7% owned by the Company and 4.3% held by the Tekna Seal minority stakeholders.  As a result of this transaction, income from continuing operations excludes the income from discontinued operations, before tax of $0.1 million and the gain on disposition of this business, after tax of $4.2 million.

 

Income Tax Benefit

 

Income tax benefit from continuing operations was $1.3 million for the three month period ended October 2, 2016, compared to $0.4 million for the three month period ended September 27, 2015. 

 

The primary reason for the increase in the tax benefit in the three month period ended October 2, 2016 was our net loss and the amortization of indefinite-lived intangible assets that were not available to offset existing deferred tax assets (termed a “naked credit”).

 

23


 

Table of Contents

Liquidity and Capital Resources

 

As of October 2, 2016, we had cash and cash equivalents of $3.9 million.  We anticipate our cash on hand and cash flows from operations will be sufficient to finance our operations for the next twelve months.  In order to provide additional liquidity in the future and to help support our strategic goals, we have a senior secured revolving loan, with a current borrowing capacity of up to $25.0 million.  After consideration of $3.1 million of borrowings outstanding, our remaining borrowing capacity was $21.9 million at October 2, 2016.  Any additional borrowings under the senior secured revolving loan are subject to compliance with the terms of our Senior ABL Credit Facility.

 

Under the new Senior ABL Credit Facility with Citizens Bank, N.A., we will not maintain any cash on hand in our domestic bank accounts by design.  Instead, we maintain a $25.0 million asset based revolver loan as part of our loan agreement that includes an automatic cash sweep feature that identifies any cash available in our bank accounts at the end of a banking business day and then applies that cash to reduce our outstanding revolver loan balance for that day to fund our continuing operations.  The reduction serves to decrease our daily interest expense to the extent cash is available and swept over to reduce the revolver loan.  Disbursements are paid daily from cash being made available under our revolver loan based on a borrowing base calculation.

 

Cash held in financial institutions outside the United States totaled $1.2 million and $1.6 million as of October 2, 2016 and June 30, 2016, respectively.  Our Hungarian subsidiary, where these funds are held, is taxed in a similar manner to our domestic subsidiaries.  Thus, we would not incur a material tax obligation should we decide to repatriate these funds.   

 

Operating Activities

 

Cash provided by operating activities decreased $1.1 million to $0.4 million for the three months ended October 2, 2016, as compared to $1.5 million of cash provided by operating activities for the three months ended September 27, 2015, primarily due to the following:

 

·

A pre-tax gain of $5.7 million recognized on the sale of our subsidiary, the cash from which is recognized as an investing activity;

·

Deferred income taxes decreased $1.0 million in the first quarter of fiscal year 2017 primarily due to applying an annualized effective tax rate to the quarter results of $0.5 million and a reduction in deferred taxes attributable to the subsidiary that was sold of $0.4 million;

·

The reductions in cash provided by operating activities were partially offset by an increase in net income of $4.1 million; and

·

An increase in cash provided by changes in working capital of $1.3 million.  Cash provided by operations in fiscal year 2017 was due in part to cash received from income tax refunds of approximately $0.9 million.  Increases in accounts receivable, inventory, accounts payable and accrued expenses were primarily due to higher sales volume.  In addition, accrued expenses increased due to accruals for professional fees related to the sale of Tekna Seal and the refinancing of debt.

 

Investing Activities

 

Cash provided by investing activities increased $9.8 million to $9.2 million for the three months ended October 2, 2016 as compared to net cash used in investing activities of $0.6 million for the three months ended September 27, 2015, primarily due to the following:

 

·

Proceeds received from the sale of our subsidiary of $10.5 million; and

·

Partially offset by an increase in cash used to purchase property and equipment of $1.3 million.

 

Financing Activities

 

Cash used in financing activities increased $7.8 million to $9.4 million in the three months ended October 2, 2016, as compared to cash used of $1.6 million in the three months ended September 27, 2015, primarily due to the following:

 

·

Higher net principal payments on our long-term debt primarily due to cash received of $10.5 million from the sale of our subsidiary, which was applied against our debt, partially offset by borrowings.

 

24


 

Table of Contents

Debt and Credit Arrangements

 

For a discussion of our long-term debt, see Note 8, Debt, to our condensed consolidated financial statements in Part I, Item 1 to this Report incorporated herein by reference thereto.  See Note 7, Debt, to the consolidated financial statements in our Annual Report on Form 10-K for the fiscal year ended June 30, 2016 for more information about our long-term debt.

 

The descriptions of the Senior ABL Credit Facility and the Subordinated Term Loan Agreement (together, our “Credit Facilities”) do not purport to be complete and are subject to, and are qualified in their entirety by, the full text of the respective documents.

 

Financial Ratio Covenants

 

The terms and conditions of the Credit Facilities require us to comply with a number of financial and other covenants, such as maintaining debt service coverage and leverage ratios in certain situations and maintaining insurance coverage. These covenants may limit our flexibility in our operations, and breaches of these covenants could result in defaults under the instruments governing the applicable indebtedness even if we had satisfied our payment obligations.  If we were to default on the credit agreements or other debt instruments, our financial condition would be adversely affected.

 

Non-compliance by us with any of the covenants would constitute events of default under both of the Credit Facilities pursuant to cross-default provisions and could result in acceleration of payment obligations for all outstanding principal and interest for loans made under both of the Credit Facilities, unless such defaults were waived or subject to forbearance by the respective creditors. 

 

Senior ABL Credit Facility Financial Ratios.  Our Senior ABL Credit Facility contains a financial ratio covenant, summarized as follows:

 

Fixed Charge Coverage Ratio.  We may not permit the Fixed Charge Coverage Ratio, as of the last day of any period of four consecutive fiscal quarters, to be less than the greater of (i) 1.10 to 1.00 and (ii) the maximum fixed charge coverage ratio or equivalent ratio permitted under the Subordinated Loan Agreement.  The Fixed Charge Coverage Ratio is defined as the ratio of (a) Consolidated EBITDA minus the unfinanced portion of capital expenditures minus expense for taxes paid in cash; to (b) fixed charges, all calculated on a consolidated basis in accordance with GAAP.

 

The summary calculations of our Senior ABL Credit Facility Fixed Charge Coverage Ratio as of October 2, 2016 is as follows:

 

 

 

 

 

 

(in thousands, except ratio)

    

Amount

 

Consolidated EBITDA

 

$

12,087

 

Less unfinanced portion of capital expenditures

 

 

(2,364)

 

Less expense for taxes paid in cash

 

 

(200)

 

Coverage Amount (a)

 

$

9,523

 

Fixed Charges (b)

 

$

6,180

 

Fixed Charge Coverage Ratio (a:b)

 

 

1.54:1.00

 

 

25


 

Table of Contents

Subordinated Loan Agreement Financial Ratios.  Our Subordinated Loan Agreement contains the following financial ratio covenants, summarized as follows:

 

Minimum Fixed Charge Coverage Ratio.  We may not permit the Minimum Fixed Charge Coverage Ratio, as of the last day of any fiscal quarter ending during any period set forth in the table below, to be less than the ratio set forth opposite such period in the table below.  The Fixed Charge Coverage Ratio is defined as the ratio of (a) Consolidated EBITDA minus the unfinanced portion of capital expenditures minus expense for taxes paid in cash (other than certain federal and state taxes excluded under the McLarty Second Amendment); to (b) fixed charges, all calculated on a consolidated basis in accordance with GAAP.

 

 

 

 

Period

    

Fixed Charge Coverage Ratio

March 27, 2016 through September 24, 2016

 

1.00:1.00

September 25, 2016 through March 25, 2017

 

1.00:1.00

March 26, 2017 through September 23, 2017

 

1.05:1.00

September 24, 2017 through March 24, 2018

 

1.10:1.00

March 25, 2018 through September 29, 2018

 

1.15:1.00

September 30, 2018 and thereafter

 

1.20:1.00

 

The summary calculation of our Subordinated Loan Agreement Fixed Charge Coverage Ratio as of October 2, 2016 is as follows:

 

 

 

 

 

 

(in thousands, except ratio)

    

Amount

 

Consolidated EBITDA

 

$

12,087

 

Less unfinanced portion of capital expenditures

 

 

(2,364)

 

Less expense for taxes paid in cash

 

 

(200)

 

Coverage Amount (a)

 

$

9,523

 

Fixed Charges (b)

 

$

6,180

 

Fixed Charge Coverage Ratio (a:b)

 

 

1.54:1.00

 

 

Maximum Total Leverage Ratio.  We may not have a Total Leverage Ratio, as of the last day of any fiscal quarter ending during any period set forth in the table below, exceed the ratio set forth opposite such period in the table below.  The Total Leverage Ratio means the ratio of (a) our funded indebtedness as of such date, to (b) Consolidated EBITDA for the Test Period ended as of such date.

 

 

 

 

 

Period

    

Total Leverage Ratio

 

March 27, 2016 through September 24, 2016

 

5.50:1.00

 

September 25, 2016 through December 24, 2016

 

5.00:1.00

 

December 25, 2016 through March 25, 2017

 

4.50:1.00

 

March 26, 2017 through June 29, 2017

 

4.25:1.00

 

June 30, 2017 through September 23, 2017

 

4.00:1.00

 

September 24, 2017 and thereafter

 

3.50:1.00

 

 

The summary calculations of our Subordinated Loan Agreement Total Leverage Ratio as of October 2, 2016, is as follows:

 

 

 

 

 

 

(in thousands, except ratio)

    

Amount

 

Funded Indebtedness (a)

 

$

47,196

 

Consolidated EBITDA (b)

 

$

12,087

 

Maximum Total Leverage Ratio (a:b)

 

 

3.91:1.00

 

 

Compliance with Financial Ratio Covenants

 

As of October 2, 2016, we were in compliance with our debt covenants under our Senior ABL Credit Facility and our Subordinated Loan Agreement.

 

26


 

Table of Contents

GAAP to Non-GAAP Reconciliation

 

Fixed Charges and Consolidated EBITDA used in our debt covenant calculations are non-GAAP financial measures.  We have provided this non-GAAP financial information to aid in better understanding of our financial ratios as used in our debt covenant calculation.  The methodology used is defined in our debt agreements.  Non-GAAP financial measures are not in accordance with, or an alternative for, generally accepted accounting principles in the United States.  The non-GAAP financial measures are not meant to be considered in isolation or as a substitute for comparable GAAP financial measures, and should be read only in conjunction with our consolidated financial statements prepared in accordance with GAAP.

 

Fixed Charges consist of interest payments, principal payments on our debt, and capital lease payments for the prior four quarters.

 

Consolidated EBITDA used in our debt covenant calculations is based on the sum of the prior four quarter actual amounts.  The reconciliation of GAAP net income to Consolidated EBITDA to is as follows (in thousands):

 

 

 

 

 

 

For the twelve months ended:

 

October 2, 2016

 

Net income

    

$

1,842

 

Share-based compensation

 

 

489

 

Interest expense, net

 

 

4,418

 

Income taxes

 

 

724

 

Depreciation and amortization

 

 

9,519

 

Transaction related expenses (1)

 

 

1,311

 

Restructuring and severance expenses

 

 

563

 

Pro-forma EBITDA adjustment to exclude discontinued subsidiary

 

 

(6,779)

 

Consolidated EBITDA (2)

 

$

12,087

 


(1)

Transaction related expenses relate to legal fees incurred to amend certain debt agreements, loss on extinguishment of debt, charges related to the sale of our non-core subsidiary and costs incurred to relocate a facility.

(2)

Consolidated EBITDA excludes interest expense, net and income taxes because these items are associated with our capitalization and tax structures.  Consolidated EBITDA excludes depreciation and amortization expense because these non-cash expenses reflect the impact of prior capital expenditure decisions which may not be indicative of future capital expenditure requirements.  Share-based compensation, transaction related costs, restructuring and severance expenses, and pro-forma EBITDA adjustment to exclude discontinued subsidiary are adjustments made in accordance with our bank debt covenants.

 

Off Balance Sheet Arrangements

 

We had no off-balance sheet arrangements that would have a material effect on our financial position, results of operations or cash flows as of October 2, 2016.

 

Critical Accounting Policies and Estimates

 

The preparation of financial statements requires management to make estimates and assumptions that affect amounts reported therein, including estimates about the effects of matters or future events that are inherently uncertain.  Policies determined to be critical are those that have the most significant impact on our financial statements and require management to use a greater degree of judgment and/or estimates.  For a discussion of our critical accounting policies, see Item 7, Management’s Discussion and Analysis of Financial Condition and Results of Operation, in our Form 10-K for the fiscal year ended June 30, 2016.

 

Item 3.  Quantitative and Qualitative Disclosures About Market Risk

 

Pursuant to permissive authority under Regulation S-K, Rule 305, we have omitted Quantitative and Qualitative Disclosures About Market Risk.

 

27


 

Table of Contents

Item 4.  Controls and Procedures

 

Evaluation of Disclosure Controls and Procedures

 

We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our filings with the SEC is recorded, processed, summarized and reported within the time period specified in the SEC’s rules and forms, and that such information is accumulated and communicated to management, including our Chief Executive and Chief Financial Officer, or persons performing similar functions, as appropriate, to allow timely decisions regarding required disclosure based on the definition of “disclosure controls and procedures” as defined in Rule 13a-15(e) promulgated under the Securities Exchange Act of 1934, as amended (the “Exchange Act”).

 

As of the end of the period covered by this Report, and under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we evaluated the effectiveness of the design and operation of our disclosure controls and procedures.  Based on this evaluation, we have concluded that our disclosure controls and procedures were not effective as of October 2, 2016, at the reasonable assurance level due to weaknesses in our internal control over financial reporting.

 

We previously reported material weaknesses that were identified as of June 30, 2016.  Our information technology and accounting infrastructure was inadequate, which could result in the failure to perform timely and effective reviews at a precision necessary to identify a material error. 

 

Changes in Internal Control over Financial Reporting

 

To address the material weaknesses associated with our information technology and accounting infrastructure, remediation actions taken in fiscal year 2017 include:

 

·

Upgrade to the latest version of the enterprise resource planning system used at AFT; and

·

Strengthen the documentation of processes, procedures, and the review and approval of our financial activities at our smaller facilities.

 

During the first quarter of fiscal year 2017, we implemented the following changes in our internal control over financial reporting to address the previously reported material weakness and to enhance our overall financial control environment:

 

·

We sold Tekna Seal, which was one of our smaller facilities.  We are in the process of moving the accounting for GF&F to Kecy, which has a larger accounting staff with better segregation of duties.  We are improving the documentation of process and procedures at 3DMT and Thixoforming.  We have also enhanced our process to review and approve the financial records of ARC Wireless.

 

The audit committee directed management to implement remediation measures and is monitoring their implementation.  Certain remediation measures may extend into fiscal year 2018.  In addition, under the direction of the audit committee, management will continue to review and make necessary changes to the overall design of our internal control environment, as well as policies and procedures to improve the overall effectiveness of internal control over financial reporting.

 

Management believes the measures described above and other procedures that will be implemented will largely remediate the control deficiencies we have identified and strengthen our internal control over financial reporting.  However, the implementation of certain mitigating processes and procedures is dependent on certain factors, including, but not limited to, our financial performance.  Management is committed to continuous improvement of our internal control processes and will continue to evaluate and work to improve internal control over financial reporting.  

 

Except as described above, there have been no changes in our internal control over financial reporting during the quarterly period ended October 2, 2016, that would have materially affected, or are reasonably likely to materially affect, our control over financial reporting.

28


 

Table of Contents

PART II. OTHER INFORMATION

 

Item 1A.  Risk Factors

 

There have been no material changes to the risk factors described in our Annual Report on Form 10-K for the fiscal year ended June 30, 2016.

 

Item 6.  Exhibits

 

EXHIBIT INDEX

 

 

 

 

Exhibit Number

    

Description

 

 

 

2.1* 

 

Membership Interest Purchase Agreement, dated September 30, 2016, between Quadrant Metals Technologies LLC, Doug McCarron and Dianna Quasha and Winchester Electronics Corporation.  Schedules to the Membership Interest Purchase Agreement have been omitted pursuant to Item 601 (b)(2) of Regulation S-K.  The Company will furnish supplementally a copy of any omitted schedule to the Securities and Exchange Commission upon request.

10.1

 

Second Amended and Restated Credit Agreement by and among ARC Group Worldwide, Inc. and certain of its subsidiaries as borrowers, and Citizens Bank, N.A., dated as of September 29, 2016, incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K, filed on October 3, 2016.

10.2

 

Amended and Restated Guarantee and Collateral Agreement by and among ARC Group Worldwide, Inc. and certain of its subsidiaries as guarantors, and Citizens Bank, N.A., dated September 29, 2016, incorporated by reference to Exhibit 10.2 to the Company’s Current Report on Form 8-K, filed on October 3, 2016.

31.1*

 

Officers’ Certifications of Periodic Report pursuant to Section 302 of Sarbanes-Oxley Act of 2002.

31.2*

 

Officers’ Certifications of Periodic Report pursuant to Section 302 of Sarbanes-Oxley Act of 2002.

32.1&

 

Officers’ Certifications of Periodic Report pursuant to Section 906 of Sarbanes-Oxley Act of 2002.

101.INS*

 

XBRL Instance Document

101.SCH*

 

XBRL Taxonomy Schema

101.CAL*

 

XBRL Taxonomy Calculation Linkbase

101.DEF*

 

XBRL Taxonomy Definition Linkbase

101.LAB*

 

XBRL Taxonomy Label Linkbase

101.PRE*

 

XBRL Taxonomy Presentation Linkbase

 

 

 

 

 

 


*Filed with this Form 10-Q.

&This certification is deemed not filed for purposes of section 18 of the Securities Exchange Act of 1934, as amended, or otherwise subject to the liability of that section, nor shall it be deemed incorporated by reference into any filing under the Securities Act of 1933, as amended or the Exchange Act.

 

29


 

Table of Contents

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

 

ARC GROUP WORLDWIDE, INC.

 

 

Date:  November 10, 2016

/s/ Jason T. Young

 

Name:

Jason T. Young

 

Title:

Principal Executive Officer

 

 

 

 

 

 

Date:  November 10, 2016

/s/ Drew M. Kelley

 

Name:

Drew M. Kelley

 

Title:

Principal Financial Officer and

 

 

Principal Accounting Officer

 

 

 

 

 

 

 

30